Used Doosan Compressor for sale (263)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2021. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 2 units available • CNC control: FANUC i Series (15" display, 2 MB program storage / up to 1,000 programs, Ethernet connection) • Rapid traverse X: 36 m/min • Rapid traverse Y: 36 m/min • Rapid traverse Z: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Coolant gun • Ball screw nut cooling • Tool breakage detection in the magazine • Automatic doors • Robot interface • Preparation for 4th axis • Coolant level sensor • Mist collector interface Additional equipment • LNS MH500 chip conveyor • Belt-type oil skimmer • HIWIN RCV 250 rotary table (4th axis) • HIWIN RTS 250 support (tailstock/support for 4th axis) • Hydraulic unit 200 bar, 2 A+B • Hydraulic fixture support for 4th axis • Seat air check Technical Specification Hjdpfx Absz N E Dvoaew Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Hedpsy Uwzbsfx Abasw Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details. Table Hjdpfx Abjzzw Hnsasw • Outer length: 1200 mm • Outer width: 540 mm • Full Load Current: 55.31 A • Interrupting Capacity: 5 kA • Short Circuit Withstand: 10 kA • Carousel/disc-type automatic tool changer • 30-position tool magazine loaded with tooling • Top-mounted mist extraction / air filtration unit (POSMA) • Machine status light tower

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg Hjdpfx Ajyg Df Asbajw ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights ---- Further equipment information: ---- Operating hours are generally read off the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Hodpey Up Itsfx Abasw Chassis number: 0032 Mast type: Triplex Gearbox: Automatic Technical condition: very good Side shift, 3rd valve, 4th valve,

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014 Operating hours: 6.540 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Hodey Takiepfx Abaew Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier Hedpsyyy H Rjfx Abaow - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Also available with low-cost delivery!

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 2,129 mm, turning diameter: 550 mm, spindle motor power: 26 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 90 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, type of input current: three-phase, total height: 2,305 mm, total length: 5,550 mm, total width: 2,300 mm, overall weight: 9,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 2-Axis lathe with FANUC 21i-TB CNC Hedpex Sqwwsfx Abasw

Condition: excellent (used), operating hours: 6,974 h, lifting height: 5,850 mm, fuel type: diesel, mast type: triplex, power: 81 kW (110.13 HP), motor manufacturer: Doosan, fork length: 2,000 mm, total height: 3,100 mm, total length: 4,100 mm, total width: 2,250 mm, color: other, Equipment: air conditioning, Year of construction: 2018 Number of cylinders: 4 Empty weight: 13.860 kg Engine type: Doosan D34 Fuel tank: 137 litres Lifting capacity: 8.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Pallet forks - Radio - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Hedpfx Abjzzd Ifoajw Country of production: Duitsland Hydraulic fork positioner with side shift, reversing camera, enclosed cab, air conditioning

Condition: used, machine/vehicle number: 26411, Year of construction: 2013, operating hours: 5,486 h, load capacity: 2,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,635 mm, Equipment: cabin, sideshift, .: 26411 Machine details: Year of manufacture: 2013 Load capacity: 2,500 kg Lifting height: 3,950 mm Indicated operating hours: 5,486 h Mast type: Standard Mast height: 2,635 mm Length/Width/Height: 2,500 / 1,160 / 2,210 mm Operating weight: 4,200 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Side shifter * Fork positioner * Load backrest ---- Further machine information: ---- The stated operating hours are generally read-off hours. We are happy to offer you suitable transport. An additional 250–300 forklifts, attachments, and sweepers are immediately available for you. Rentals also possible! We are happy to buy your used machine. Hjdpfx Aboyu Tk Deasw Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade buyers, the machine is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Hjdjzpw Dpepfx Abaow Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, quill diameter: 78 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Hsdpfeykikxsx Abajw Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 220 mm, travel distance Z-axis: 400 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 2, Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine. • Control feature: Independent dual-channel operation (Right & Left) • Machine condition: Good working condition, currently under power • Max. turning diameter: Ø 400 mm • Max. turning height: 400 mm • Max. swing over bed: Ø 490 mm • Chuck size: 315 mm • Spindle nose: A2-8 Hsdez Hb Htspfx Abaew • Turrets: 2 × 8/12-station turrets • Guideways: Box guideways (heavy duty) Additional equipment • Rear/side chip conveyor with cart • High-pressure coolant system Technical Specification Driven Tools No

Condition: excellent (used), machine/vehicle number: FRAOF-1380-00038, Year of construction: 2014, operating hours: 5,170 h, lifting height: 8,720 mm, free lift: 3,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: TAB, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, Battery: 750 Ah, 48 V, Year of manufacture 2017, Brand of battery TAB Lifting capacity: 1.600 kg Maximum passing height: 345 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-04-09 Hedpfxewdvz Es Abaew Please contact Johanny Hendrikse for more information

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 6700 XL was manufactured in 2021. It features an impressive X-axis travel of 2,100 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a FANUC i-Series CNC control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700 XL vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent, used • Functionality: Fully functional • Display: 15" • Program storage: 2 MB / 1,000 programs • Rapid traverse X/Y/Z: 30 / 30 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ball screw nut cooling • Tool breakage detection • Automatic doors • Robot interface • 4th-axis preparation • Ethernet connection • Coolant gun • Coolant level sensor Additional equipment • HIWIN RCV 320 rotary table (4th axis) • HIWIN RTS 320 support (tailstock) • Hydraulic aggregate: 200 bar, 3 A+B • Hydraulic 4th-axis fixture support: 4x oil / 4x air; seat air check • LNS MH500 chip conveyor • Oil mist extraction system Hodpfx Abjz Ngy Ejajw • Oil skimmer Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2014, DOOSAN PUMA 2600LMB (2014) CNC LATHE WITH LIVE TOOLS AND “C” AXIS Z-1,350 CNC FANUC i Series 10.4” Color LCD EZ-Guide - Swing over bed: 780 mm - Swing over carriage: 630 mm - Max. turning diameter: 376 mm - Max. turning length: 1,245 mm - Travel: X 260 mm Z 1,350 mm - Chuck diameter: 380 mm - Bar capacity: 102 mm - Spindle nose: ASA-A2-11 - Headstock: 2,800 rpm, 22 kW - Driven turret: 12 stations BMT 65P* (Indexing 1 station 0.25 sec) - Live tools: 5.5 kW, 5,000 rpm - C axis indexing: 0.001 mm - Tailstock quill diameter/travel: 100 mm/100 mm EQUIPMENT INCLUDED: - Samchully HCH-15” 3-jaw hydraulic chuck, 380 mm diameter - C-axis 360° (0.001°) - Automatic tool presetter Hedpoyb Sryofx Abaow - Integrated tailstock - High-pressure pump - Chip conveyor - Preparation, base, and logic for steady rest - SMW AUTOBLOK SLU-3.1 hydraulic steady rest (20-165 mm) - Set of tool holders - Set of DOOSAN and FANUC manuals CONDITION: Machine in good condition. Can be seen in operation. Immediate delivery.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: I Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details. • Display: 15" • Program memory: 2 MB / up to 1,000 programs • Rapid traverse: X/Y 36 m/min, Z 30 m/min Hodjz I S E Nspfx Abajw • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Automatic doors • Robot interface • Tool breakage detection in tool magazine • Ball screw nut cooling • Ethernet connection • Air clamp interface on table • Seat air check • Coolant level sensor • Mist collector interface • Coolant gun • Condition: Used, excellent condition, fully functional and regularly maintained • Quantity: 4 units available Additional equipment • Chip conveyor LNS MH500 (right side) • Belt-type oil skimmer • Vacuum pump Technical Specification Taper Size BT 40

Condition: used, color: orange, lifting height: 3,410 mm, Year of manufacture: 2019 Year of construction: 2019 Operating hours: 3.650 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Hodpfx Aboxqfb Ejaow = Additional options and accessories = - Rubber tracks

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Hjdpfx Aow D Aynebasw

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm Hodpfx Aeypb Srjbasw B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,280 h, travel distance X-axis: 165 mm, travel distance Z-axis: 700 mm, total height: 2,200 mm, total width: 1,630 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 2,800 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details. - Operating Hours: 41,280 h (as of Spindle Hours: 24,632 h (as of Total Machined Parts (TEIL GESMT): 14,162 pcs- Number of Spindles: 2 (Main Spindle & Counter/Sub Spindle)- Main Spindle Speed Range: 50 - 5,000 rpm- Counter Spindle Speed Range: 50 - 6,000 rpm- Number of Turrets: 2 (Tool holders)- Powered/Driven Tools: Yes- C-Axes: 2- Y-Axes: 1 (Upper turret)- Max. Turning Diameter: 230 mm- Max. Workpiece Length: 700 mm- Power Supply Voltage: AC 200/220V, 3-Phase (PE, 50/60 Hz) / 400 V, 50 Hz- Rated Power (Nennleistung): 75.21 kVA- Full Load Current (Volllaststrom): 197.37 A- Interrupting Capacity (Unterbrechungsstrom): 13 kA- Short-Circuit Current (Kurzschluss-Strom): 25 kA- Schematic Output (Schaltplan-Ausgabe): PT1H31AA02- Additional Equipment & Accessories: * FMB turbo 8-80/3200 bar feeder * Chip conveyor * Coolant system with belt filter * Internal coolant supply (IKZ) & supply via turret head * Hydraulic power unit * Large selection of tool holders, collet chucks (REGO-FIX / ER), and turning inserts Technical Specification Hedpfx Abjz I Rbveaow Counter Spindle Yes Driven Tools Yes

Condition: used, color: orange, Year of construction: 2017 Hjdpezi Ecaefx Abaew Operating hours: 6.300 Empty weight: 23.500 kg Track width: 60 cm Digging depth: 10.795 m

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, Hjdpjzhwg Uefx Abajw FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Hodpfxovw Uyuj Abaew Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Year of construction: 2008, condition: used, New: No Hjdpfsy Alt Ujx Abaew Year of construction: 2008 VAT/margin: VAT qualifying