Used Demag Compressor for sale (500)

Condition: used, Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle Itsdpfoc Uz Htex Ad Neb -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: used, Gear motor electric motor -Speed: 197 rpm Itjdpfxec Skuas Ad Njb -Power: 0.55 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Transfer in current condition as seen Itedpfod A Hgkex Ad Nsb -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Condition: used, Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm Itodpfxjc Sxqko Ad Neb -Weight: 14 kg

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg Iedpfx Aec Uz Hujd Netb

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW Itjdpscb E Trsfx Ad Nsb -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes Ijdpfx Adeya Ag Ss Notb * jib cranes * KBK rail cranes * boat lifts All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: good (used), Year of construction: 2008, clamping force: 1,700 kN, Equipment: documentation/manual, Clamping force: 170 t Screw diameter: 45 mm Itjdsx Ury Espfx Ad Nsb Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2004, Clamping force: 110 t Screw diameter: 40 mm Itedpsx Urxnjfx Ad Njb Distance between tie bars V: 465 mm Distance between tie bars H: 465 mm Type: Horizontal Drive: Hydraulic

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. Isdpfx Asw Rd I Esd Njtb - Technical specifications: • Rotational speed: 100,000 rpm • Power supply: compressed air (approx. 6 bar) • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, DEMAG fine travel drive, consisting of: DEMAG motor KBA 140 B 4, 8.8 kW, 1,440 rpm; DEMAG motor KBA 80 B 4, 1.4 kW, 1,340 rpm; DEMAG gearbox EGO 8 B 3 I = 9.9 Itodpew Ulirofx Ad Njb

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete Ijdpfsdc Ipmox Ad Njtb -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed Itjdpfedc Iplox Ad Nsb -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Itsdpovvtx Tofx Ad Neb Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: excellent (used), Year of construction: 2015, Demag Systec 100/420-310 (2015) Panel: NC5 Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Itjdpjx Tdwyefx Ad Neb Possible to buy Wittmann W818 Linear robot Z= 1500mm

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Itjdpfx Ajx Tdp Nod Njb Drive: Hydraulic extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: reconditioned (used), Year of construction: 2021, portalkran 2x35 ton 25 or 28 meter spann longer possible Isdpfx Adeggggpe Nstb

Condition: used, Year of construction: 2003, Portal crane 2x12.5 tons, 28 meter span. Drive and hoisting units by Demag. Crane travel with frequency control. Isdpfxof Dzqys Ad Netb

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 * Power: 52 kW -----Internal vehicle number: 10326----Errors and prior sale excepted. Itedpfx Adewc Igws Nsb WhatsApp support available! If you have questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp. Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 5 t span width: 21000 mm stroke speed: 8,0 precise lift: 0,8 m/min rope diameter: 14 mm connected load: 10,2 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 100 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 71 A2, travel speed 2,5 m/min. Size of travel wheels Ø 170mm (16 pieces) Trolley main hoist EKDH 525 H12 KV3-2/1 F10; type KBV 71 B8/2; travel speed 20,0 / 5,0 m/min.; size of travel wheels Ø 125mm (4 pieces) Hoisting gear: type KBH 125 B4; lifting height 12.000 mm; braked with displacement runner; lifting speed (main stroke 8,0 m/min. and fine stroke 0,8 m/min.) single hook size 2,5 rope Ø 14mm; rope length 28.3 m; power unit group FEM 1 AM Operation via pushbutton pendant control with DST Special feature: traversing piece with interlock and stitch tracks + infrared There are more bridge cranes with a 21-meter span for sale. Ijdpfxeu Nvg Dj Ad Nstb *

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 10 t span width: 21000 mm stroke speed: 6,3 m/min. precise lift: 1,0 m/min rope diameter: 14 mm connected load: 15,5 kW Itodpjv N Ib Njfx Ad Neb SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 112 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 80 A4, travel speed 2,5 m/min. Size of travel wheels Ø 200mm (16 pieces) trolley main hoist EKDH 525 H20 KV3-4/1 F6; type KBF 80 A8/2; speed 20,0 / 5,0 m/min.; size of travel wheels Ø 160mm (4 pieces) Hoisting gear: type KBH 160 B2/12; lifting height 10.000 mm; braked with sliding runner; lifting speed (main stroke 6,3 m/min. and fine stroke 1,0 m/min.) Single hook size 5.0 rope Ø 14mm; rope length 46m; drive group FEM 1 Am Operation via pushbutton pendant control with DST Special feature: crossover piece with interlock and stitch tracks Es stehen weitere Brückenkrane mit der Spannweite 21 Meter zum Verkauf. *

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m Ijdpfx Aevbh Rhod Netb dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. Ijdpfx Asu Szhpod Nstb *

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Iedpfx Adsxxrr To Netb Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: good (used), 25 HP, 10 bar, 2570 l/min Itsdpfx Adsxliv Aj Njb