Used Demag Compressor for sale (513)

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Gbodpfx Agjx Hz Sbo Sjg

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Gbjdpfxowk Aw Hs Ag Sjg Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: not inspected (used), Bridge crane including girder, approximately 13 meters Godpsxu Utxsfx Ag Sebg

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Gedpfx Ajx Hg R Asg Sebg Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: good (used), Transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon Gjdpfoxwup Ejx Ag Sobg -Manufacturer: Demag, heavy-duty rail wagons -Platform: 3980 x 2500 mm -Load capacity: 40,000 kg -Roller spacing: 1505 mm -Overall dimensions: 4160/2500/H885 mm -Empty weight: 3360 kg

Condition: good (used), good condition – the hook block cover is slightly damaged – 8t lifting gear according to factory, downgraded to 6.5t – for further information see type plate Gjdpfex Hhgrox Ag Sobg

Condition: used, Year of construction: 2002, Additional title: Slewing crane Godpfx Agsxykvmo Sjbg Maximum load: 2000 kg Reach: 4 m Height: 4,61 m

Condition: good (used), Year of construction: 2012, clamping force: 2,800 kN, Equipment: documentation/manual, Demag Systec 280/630-600 (2012) Clamping force: 280 t Screw diameter: 45 mm Shot weight: 294 g Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Shot volume: 323 cm3 Type: Horizontal Gbodpfx Agjxykw Re Sog Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Gbsdpsx Eikyefx Ag Ssg Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Gbedpfx Asx Ex R Eog Ssg

Condition: used, functionality: fully functional, DEMAG DH525 H12, 5 t. Overhaul (technical and visual) possible by us. Without electrics KBH 140 B 2/12 Additional hoisting units, motors KBH / KBF / KBV / K-Motor, spare parts, rope guides, running wheels, brakes, and much more available on request. Gbsdpfx Agsx Ap R Uo Ssg Please contact us by phone or email for questions or quote requests.

Condition: used, Electric chain hoist crane DEMAG type PK1N-F serial no. 5533406 year of construction 1983 Load capacity 125 kg Hook path 3.8 meters Gbedpoik Stfofx Ag Sjg Lifting speed 8 m/min. Fine lifting speed 2 m/min. Cable length operating cylinder approx. 1.2 meters 1 load line = 125 kg Mains connection 380 Volt, 50 Hz Weight: 25 kg good condition

Condition: defective spare-parts repository (used), Year of construction: 2003, Demag Ergotech - system 250/280-80 Clamping force 25 t Screw diameter 25 mm Gbjdpfx Agex Em Hne Seg Year of manufacture 2003 Pump defective (minor issues) Sprue picker

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ Gbedpfxsh Nv Ite Ag Ssg - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Year of construction: 1995, condition: used, Demag crane rail KBK II length 7000 mm with ceiling mounting + electric chain hoist 125 kg but there is also the possibility for 250 kg Gbodpoh Dwhrofx Ag Sjg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, column diameter: 90 mm, displacement volume: 442 cm³, injection pressure: 1,646 bar, injection weight: 400 g, mold height (min.): 340 mm, ejector force: 16,000 N, ejector stroke: 100 mm, opening stroke: 790 mm, total length: 5,552 mm, total width: 1,656 mm, total height: 2,118 mm, overall weight: 8,200 kg, pressure: 1,646 bar, pump power: 30,000 W, For sale: fully operational machine, currently in continuous production. Without Campetella robot. Gbedpex Dkvhjfx Ag Ssg

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Gbedpfx Aju Swb Uog Sog Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Gbedpfox Em E Rex Ag Sjg

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG model DKUN 1-100 K V1 F4 Serial No. 61801899 Year of manufacture: 1997 Load capacity: 100 kg Hook path: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Gsdpfjhtr Eyjx Ag Sobg Control pendant cable length: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz 1 chain fall = 100 kg Net weight: 16.5 kg Good condition

Condition: used, E-Chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS-control via crane system controller make no.61456646 year of construction 2003 lifting capacity: 200 kg hook path: 4,0 meter Main hoisting speed: 14,0 / 19,2 m/min. Fine lifting speed: 0,20 m/min. chain size 4,2 x 12,2 mm 1 load strand = 200 kg - with control logic DKES2/5 500V Gsdegd Ipnjpfx Ag Sjbg - without crane control - Dematik BUS control via crane system control - without roller trolley Mains connection: 400 Volt, 50 Hz rated power: 750 W rated current: 2,4 A good condition

Condition: used, Electric Chain Hoist Crane DEMAG Type PM 8 - Manulift Serial No.: 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance suspension to load hook: 700 mm Main lifting speed: 12 m/min. Fine lifting speed: 2 m/min. Gbedoxcbnlspfx Ag Ssg 1 load strand = 80 kg Manulift hand control located directly at the crane hook Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 Gedpfxoxf Uqfe Ag Sjbg - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: used, E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Factory no.: 63207040 Year of manufacture: 1993 Load capacity 1000 kg Hook path 2.6 meters Gedpfx Ajv Daqrjg Sjbg Distance from suspension to load hook 450 mm Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Cable length of control box approx. 1.7 meters Mains connection 400 volts, 50 Hz. 2 load strands = 1000 kg - Emergency stop Weight 46 kg good condition

Condition: used, Electric chain hoist crane DEMAG Type PK2N-F Lifting capacity: 500 kg Hook travel: 3.5 meters Distance from suspension to load hook: 500 mm Godpfx Ajxcbm Isg Sobg Lifting speed: 5 m/min Fine lifting speed: 1.25 m/min Pendant control cable length: approx. 1 meter Motor power: 0.5 / 0.13 kW Power supply: 380 Volt, 50 Hz 2 load chains = 500 kg Net weight: 32.5 kg Good condition

Condition: used, Electric chain hoist crane DEMAG Type PK2-F Load capacity: 500 kg Hook travel: 2 meters Distance from suspension to load hook: 500 mm Lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: 1.7 meters Motor power: 0.5 / 0.13 kW Gedpfx Agsxcbmzo Sobg Power supply: 380 Volt, 50 Hz 2 load strands = 500 kg Net weight: 34 kg Good condition