Used cranes for sale (634)

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE 3 Spindle Machining Center Mfd. 2020 Cgedpfjvn T Dajx Abbot SN: 101262 Control: Fanuc Panel i Chip Conveyor

Condition: excellent (used), Year of construction: 2016, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type VS, lifting capacity 2500 kg -Accessories: A wireless remote control (transmitter/receiver) can be supplied for an additional charge. -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min Cgjdpfsy I Aknsx Abbst -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual Cgedju Szhpspfx Abbst at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. *

Condition: good (used), Year of construction: 2019, 16 ton crane trolley, Kone, CXT, (chassis, rope, hook) – used - : Price ex-location: now only €5,000 instead of €12,500 (net), dismantled and loaded! Cgedpfjy Iv D Ujx Abbst Not included in the sale: bridge, remote control, coil hook. Manufacturer: Kone Year of manufacture: 2019 Reference no. 200967176/10 Order no. 4501376439 Electric wire rope hoist Hoist type: CXT60410160SA5JDD0S Hoist serial number: 58704433 Load capacity: 16,000 kg Lifting height: 10.5 m Drum pulling force: - Rope length: - Classification: M5 Current consumption: 68.2 A Total output: 36.3 kW Hoisting motor Motor type: MF13XL200N260FA5132X-IP55 Serial number: 58202098 Power: 35 kW Gearbox type: GEN410NB000-D Lifting speed: 11.20/0.22 m/min Serial number: 58664786 Rope speed: - Inspections Operating voltage: 400 V, 50 Hz Control voltage: 48 V Serial number: - Control type: D2H overload SG Control cable - set load: 17,600 kg Circuit diagram: 200967176 Manufactured to IEC Travel drive Chassis motor type: MF06LA200-132F95001E-IP55 Serial numbers: 58531833, 58531836 Gearbox type: GES342PS3BO-A Serial numbers: 58657454, 58657451 Power: 0.65 kW Track gauge: 2,000 mm Overall height: approx. 65 cm Carriage type: M Wheel tread: 74 mm Flange width: - VFD serial no.: 37E43K2T18250130 Trolley travel speed: 32.0 m/min/- Original new price: approx. €20,000 Dismantling, including disconnection, will be professionally carried out by KONE. You will also receive the complete crane documentation and inspection book. Condition: good – very good Available: immediately Location: Niedernberg near Aschaffenburg Additional photos on request! Wiring diagram available as PDF, as well as operating manual, installation instructions, spare parts list, master data sheet, declaration of conformity, inspection book.

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Reach: 4 m Cedpfxoxykvmo Abbogt Height: 4,61 m

Condition: good (used), Code: 0379 Brand: BRENNA + ELEPHANT - ITALY Model: GR 200 - CE Standard Codpfx Abjy Ndihsbegt Manually operated jib crane with cantilever beam - CE Standard Lifting capacity 200 kg Chemical-anchored base Complete with: Electric hoist RWM Mod. W 125 T1 V1 Type F - Capacity 125 kg - Speed 8 mt/min - Motor 0,6 Kw - Rpm 1400 Pneumatic suction lifter ELEPHANT Mod. VLA6F with 6 plates suitable for handling sheet metal and other materials - Capacity 500 kg - Plate dimensions diameter 265 mm - Transverse and longitudinal plate adjustment - Compressed air operation with powerful and quiet vacuum generator - Operating pressure 6-7 bar Overall dimensions for transport mm 4000 x 1100 x 900 h + Pallet mm 2000 x 1300 x 600 h

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch Codpfxeghnbze Abbegt -other crane ropes are also available -Price: per roll -Quantity: 1 roll available -Weight: 10.5 kg/piece

Condition: excellent (used), Column-mounted slewing crane, manufacturer Demag Lifting capacity: 500 kg Jib length: 3500 mm Csdpfx Abey Hfycjbegt Lifting height: 2250 mm Overall height: 3100 mm Chain hoist Demag PK 2 N Lifting speed: 5 m/min 380 Volt Weight: 515 kg

Condition: excellent (used), Year of construction: 2016, Sell Aluminum Porta Gantry 250KG mobile gantry winch, 2016r in bdb condition. Cjdpfsvcdcisx Abbogt

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm Cedpfx Abow Rddysbogt • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: excellent (used), I will sell a 250kg crane + Demag winch. In very good condition. Cgodpfxewdraqs Abbet - Total length 185cm/ working 140cm. - Height 278cm.

Condition: excellent (used), For sale: 360° rotating column jib crane with electric trolley-mounted chain hoist. Sturdy industrial construction – ideal for workshops, production halls, warehouses, or manufacturing facilities. The crane allows for lifting and relocating heavy components within the workstation area. Technical details • Capacity: 1000 kg (1T) • Rotation: 360° • Working arm length: 412 cm • Working height: 312 cm • Electric trolley-mounted chain hoist • Power supply: 380 V • Motor power: 0.66 kW • Robust industrial-grade steel construction Cgodpfxoyrg Aus Abbot Technical condition: used, fully operational, normal signs of use.

Condition: excellent (used), For sale: a complete crane workstation consisting of two robust VETTER slewing jib cranes and a STAR LIFTKET electric chain hoist. The entire set is in excellent technical condition, ready for immediate use in a workshop, warehouse, or production hall. 1. VETTER Slewing Jib Crane (Year of manufacture: 1984) – Lifting capacity: 1,000 kg – Manufacturer: VETTER Fördertechnik, Germany – Model: G – Heavy-duty industrial design – Nameplates and torque setting instructions in accordance with DIN standards 2. Slewing Jib Crane – Specifications – Working height: approx. 460 cm – Total height: approx. 505 cm – Arm working radius: approx. 575 cm – Arm total reach: approx. 632 cm – Secure mounting to floor/construction 3. STAR LIFTKET Chain Hoist – Lifting capacity: 650 kg – Chain diameter: 7.2 mm – 2 falls – Lifting speed: 5.1 / 2.5 m/min – Power supply: 3~ 400V / 50Hz / 420V – Power: 0.9 / 1.2 kW – Year of manufacture: 2008 – Included: pendant control (up/down) with emergency STOP, trolley, and complete wiring/installation Cgsdpfx Abow Rc I Rebet Condition: Devices are fully functional, regularly serviced (last UVV inspection visible on the nameplate). Mechanically in very good condition, ready for immediate installation and operation. Manufactured: 100% Made in Germany – high durability and reliability.

Condition: excellent (used), Year of construction: 2013, For sale: Complete overhead travelling crane with an electric chain hoist from the renowned brand Stahl, with a lifting capacity of 1000 kg. Year of manufacture: 2013. The set is fully operational and ready for further use. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) Codowcrazepfx Abbsgt * Hoist: STAHL ST2010 – robust and reliable unit * Drive type: electric, chain * Total crane length: 1046 cm (10.46 m) * Stable main girder + cable and power guides * Inspection possible on site – previously operated in a clean production hall The crane is in very good technical condition – well maintained and ready to use. Ideal for workshops, industrial plants, warehouses, metalworking shops, or tool rooms.

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc Codpfxsxc Eups Abbjgt -Manufacturer: Demag, brake ring conical brake disc unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 40 mm -Weight: 0.9 kg

Condition: excellent (used), Year of construction: 2012, Overhead Crane ABUS - ELK MACH-ID 9496 Make: ABUS Type: ELK Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Cgsdpfx Ajy Ec Etsbbjt

Condition: excellent (used), overall weight: 20,000 kg, Overhead Crane ABUS - ZLK Csdey D Slgepfx Abbegt MACH-ID 9495 Make: ABUS Type: ZLK Year: 2002 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Codpfx Aetqwrvobbsgt Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.

Condition: used, FamaTec AF120 / PURTEC 45kg / Fig. 9/12 from 1,000 EUR on request Csdpfx Abjy H Ezyjbsgt

Condition: not inspected (used), functionality: unexamined, load capacity: 250 kg, No reserve price – sale guaranteed to the highest bidder! Placing a bid commits you to collect the item on time between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Load capacity: 250 kg Gantry length: 1,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,300 x 3,500 mm Weight: 350 kg Cgedpfxjy D Tdds Abbot External reference: 27

Condition: used, Year of construction: 2021, machine/vehicle number: P3375, operating hours: 867 h, Max. lifting capacity: 2,820 kg, max. working radius: 820 cm, hook height approx. 870 cm, L/W/H: 332x75x147 cm, dual power Diesel/Electric 400 V, diesel engine Yanmar 2TNV70-NMBA 7.4 kW, 2,500 rpm, electric motor fully enclosed and fan-cooled (5.5 kW, 4P, 400V), own weight approx. 2,160 kg, crane hook MAEDA SCM4x5 (capacity: 2.79 t) Cedpfxjy D Tyls Abbegt

Condition: used, Year of construction: 2017, machine/vehicle number: E0455, operating hours: 1,910 h, Max. lifting capacity: 3,830 kg, max. working radius: 1,600 cm, hook height approx. 1,680 cm, dimensions (L/W/H) 498x138x198 cm, combination unit with diesel/electric motor 380 V, diesel engine Yanmar 3TNV88-BPMB 21.4 kW at 2,500 rpm, electric motor 7.5 kW, 4-phase, net weight approx. 5,750 kg, crane hook MAEDA SCM 435 (max. lifting capacity 3,780 kg) Cgodpoy D Tyrsfx Abbjt

Condition: good (used), functionality: fully functional, Year of construction: 2020, load capacity: 1,000 kg, throat depth: 4,250 mm, working height: 4,300 mm, DGUV certified until: 10/2026, We are offering this well-maintained Vetter M10-4.5 pillar jib crane, year of manufacture 2020. Equipped with SiID-1000-2-200 hoist. Hardly used: According to the service department, the estimated operational lifespan is over 30 years before general overhaul is required. Available immediately for collection by purchaser (self-dismantling) until no later than 20.05. Price negotiable. Cgodoy I Aacepfx Abbjt If you have any questions or require further information, feel free to send us a message or give us a call. Thilo Remmel

Condition: used, Year of construction: 2011, 1 unit overhead crane STOCKER 1.2/2x05 Load capacity: 2x 250 kg, length approx. 6 m, crane has already been dismantled, placed on a pallet Colour: as shown, according to photos and inspection Year of manufacture: 2011 Codpfjy D Nc Aex Abbsgt Condition: used Storage location: outdoor area Payment method: advance payment by bank transfer Shipping: collection only from location in Ditzingen-Heimerdingen

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m Cjdpfx Abev Uvdpsbegt (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!