Moulder

WEINIG HYDROMAT 23 (9 spindle)

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED Nlsdpfx Ajz Eznusphjg MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Nodpfxou Agh Ss Apholg Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW Nlsdpfx Apez Dnt Ieheg 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES Njdpozv Sz Nefx Aphelg WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Nodpfxexpi Duj Aphslg Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine Nljdeu Shx Dspfx Aphjg - 4 drilling units top - 4 drilling units rear - Right and left

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Njdpsy H U Upefx Aphslg Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: good (used), Year of construction: 2010, Weinig Conturex C126 CNC Window production machine Description; Year of construction: 2010 Working width 40-260mm Working heigth 25-150mm Powergrip clamping table Table loading length single table 4 x 2280mm Workpiece length single table cycle 220-2700mm Table loading length double table (combined) 2 x 4630mm Workpiece length double table cycle without follow up 220-5000mm Workpiece length double table cycle with follow up 5000-6000mm Fully new PC & Software 2025 Full description on request Njdox Tq I Eepfx Aphjlg Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 007960, Squaring: First and Second Pass Max Panel Thickness: 200 mm Max feed speed: 36 m/min Nljdpowl Dnijfx Aphjg Distance between dogs: 450 mm

Condition: not inspected (used), Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm Nedpfx Apsx H Al Njholg > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...