Moulder

WEINIG HYDRO 22 AL

Condition: new, New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Hjded Hp Efepfx Ah Uefp Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg.

Condition: used, Year of construction: 2010, Touch screen control for adjusting work groups Panel height mm from 10 to 50 Solid wood 12 mm Pvc/Abs mm from 0.4 up to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Hjdpfxepzfcgo Ah Usfp Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with two motors of 1.5 KW each Reel holder plate COMBIMELT gluing unit for hot melt glue with automatic dosing VarioMelt with pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Gleaning unit with 2 motors Rounding unit Edge scraper unit Installed power KW 13.7 Machine length mm 6170 approx TECHNICAL DETAILS TO BE CHECKED

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, unit was well maintained Hodpfsh Et E Nsx Ah Ujfp Rest see pictures

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Hfodpfx Aewfqh Ajh Usp Minimum workpiece height: 17 mm driven upper and lower feed rollers

Year of construction: 1971, condition: used, Shaft system Hfsdpfoigqzrox Ah Uep 1 bottom - 4kW, 2850 rpm 2 right lateral - 3 kW, 2850 rpm 3 lateral left - 3 kW, 2850 rpm 4 right side 3 kW, 2850 rpm 5 top 5.5 kW, 2850 rpm 6 bottom - 4kW, 2850 rpm Dimensions 4900 mm x 1300 mm x H 1500mm Weight approx 5500 kg

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, WEINIG planer type Hydromat 30R Year of manufacture-1984 №2609/686 Technical characteristics of the machine: Planing width 300 mm Planing height 150 mm Maximum feed speed 120 m/min, motor power 30 kW Spindle position: 1. Horizontal lower spindle- 15 kW + control + jointer 2. Vertical right spindle - 11 kW 3. Vertical left spindle - 15 kW 4. Horizontal upper spindle - 18.5 kW + control + jointer 5. Vertical right spindle-18.5 kW 6. Vertical left spindle - 18.5 kW 7. Horizontal upper spindle - 15 kW + control + jointer 8. Horizontal lower spindle-18.5 kW+control arm 9. Horizontal lower spindle - 11 kW + control + jointer - Spindle diameter 50 mm - Automatic table lubrication system Hfsdpfxoupurqs Ah Uep - 9 drive rollers in table - Complete with tools and accessories -Knife head extractor included

Condition: good (used), screw-in heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Power: 9000 watts 230/400 volts -Material: steel (magnetic) -Number: 8x radiators available -Price: per piece -Dimensions: 1020/60/H60 mm -Weight: 1.7 kg Hsdsc Rrt Ajpfx Ah Usfp

Condition: used, Year of construction: 2012, Rotary sander with rollers for postformed workpieces with a vacuum system to hold the workpiece on the feed belt Machine dimensions: 1715 x 3235 x 2000 mm Working width: 1400 mm Working height: 100 mm Belt feed speed: 2-13 m/min Abrasive shaft rotation speed: 300-1200 rpm Support shaft rotation speed: 3-16 rpm Abrasive shaft length: 540 mm No. 8 (4+4) rotating abrasive shafts Abrasive tool diameter: 300 mm No. 336 total abrasive discs Main motor power: 5.5 kW Rotation motor power: 1.5 kW Height adjustment motor power: 0.3 kW Belt feed motor power: 0.3 kW 2.2 Vacuum fan motor power: 2.2 kW TECHNICAL DETAILS TO BE VERIFIED Hedpfx Aow E H R Tsh Uofp