Raimann B110 S resaw

WEINIG B 110 S

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, Crjdpeyi Efcsfx Aqtsh - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Condition: good (used), Year of construction: 1970, Cutting range round/square: 190/190 x 190 mm Cutting range at 45° mitre round/rectangular: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 stroke speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Csdjyvfp Ispfx Aqterh Required space: 1200 x 600 x 980 mm

Condition: used, Profile spindles WEINIG 1 piece length 1100 mm 1 piece length 650 mm 2 pcs length 700 mm Cedpfx Ajq Tn Tusqtjrh 2 pcs length 900 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2260x920x2250 mm Weight 450 kg Total power requirement 7,5 kw Codpovz Eiuofx Aqterh

Condition: used, Year of construction: 1997, Suction nozzle diameter: 200 mm Maximum volumetric flow rate: 3,200 m³/h Nominal volumetric flow rate: 2,862 m³/h Volumetric flow monitoring: Differential pressure display Negative pressure: 2,336 Pa Crjdex Edmvepfx Aqtsh Filter surface area: 16.8 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: dB Chip bag volume: l Filter cleaning: Pneumatic Motor power: 4 kW Machine length: 2,300 mm Machine width: 900 mm Machine height: 2,200 mm Weight: 350 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,089 m³/h, intake manifold diameter: 300 mm, actuation type: electric, overall weight: 952 kg, We are offering this like-new AL-KO POWER UNIT 300 P mobile dust extraction unit, manufactured in 2025, without warranty or the possibility of return. The unit is in perfect, fully functional condition. You are welcome to inspect the unit at our premises. The sale will be processed with an invoice. Type: POWER UNIT 300 P Article number: 195 677 03 Manufacturer's number: 2433409659/01 Year of manufacture: 2025 Intake nozzle: 300 mm Rated speed: 2900 1/min Rated volume flow: 5.089 m³/h Crsdpfx Ajz E H Dujqtsh Rated current: 13.7 A Vacuum at rated volume flow: 2.587 Pa Protection class: IP 54 Motor power: 7.5 kW Weight: 952 kg Voltage/current type/frequency: 400/3~/50 V/Hz Compressed air connection: 4.0 bar Fuse rating: 25 A Filter: 85101202 Kat M If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Specifications Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Height 920 mm Weight 2300 kg Crodswpvd Repfx Aqteh Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: new, Year of construction: 2026, Capacity: 5500 m³/h Motor power: 5.5 kW Voltage: 3-phase / 380 V Net weight: 700 kg Dimensions (L x W x H): 2289 x 1160 x 3063 mm Material: Galvanized sheet steel, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 0.9 bar Sound power level: 65 - 75 dB(A) Negative pressure: 2200 - 2500 Pa Filtration area: 30 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted for use in environments with dust explosion hazards in accordance with the requirements ATEX. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Csdpfxezx Av Ao Aqtsrh Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the machine finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, suction capacity: 4,900 m³/h, intake manifold diameter: 250 mm, Dust extraction unit, wood chip extractor, pneumatic self-cleaning vacuum filter – Alko Mobil JET 250 The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and for extracting all types of dry dust in various technological processes. Fan power: 6.5 kW Capacity: 4900 m3/h Vacuum: 2740 Pa Cjdpfx Aqezlcxqotorh Nozzle diameter: 250 mm Air return Stock number: 0904