WD crosswise cascade feeder

WD

Condition: used, Discharge take-off table: - total length 7850 mm Dcedpfx Asxuiq Esanok - total width 1200 mm - four upper hold-downs - prism guide 70 mm - hydraulic feed

Condition: used, Sorting / stacking system consisting of: - Cross feed conveyor - Tilting table - Disposal conveyor for intermediate laths - S-conveyor - Alignment roller conveyor - Double cross-cut station - 3 sorting boxes (1x reject, 2x stacking boxes with hydraulic lift) - Electrical components, if available - Accessories, if available Total width: approx. 7.5 m Total length: approx. 14 m Total height: approx. 3.5 m Dsdey Da Agjpfx Aaneck Sawn timber lengths: 3–5 m (possibly up to 6 m) Location: Austria, near Vienna

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm Djdpfxexuipbe Aaneck - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: used, Cross Conveyor: - total length: 7000 mm Dcedpfxjxu E E Eo Aanek - total width: 2300 mm - feed motor power: 0.75 kW - trimming saw for material - saw motor power: 2.2 kW - max. saw blade diameter: 350 mm - cutting height: 80 mm

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor Dcodjy Uzldepfx Aanek - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES Dcodpfezkg Aqjx Aanok – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: good (used), functionality: fully functional, Multiblade Foiler WD FR8 with centering device Dsdjqwgy Nepfx Aanock 2x floating saws maximum saw blade distance 550 mm maximum cutting height 165 mm maximum clearance: width 880 mm x height 180 mm central lubrication system hydraulic roller lifting system feed speed continuously adjustable in the range of 0-250 m/min centering conveyor at the entrance to the machine full hudraulics strong solid body robust line not afraid of challenges

Condition: excellent (used), Lumber tilt unit for wood packages with 4 arms. Dcodpfxoxn Nk Se Aanjk Electrically operated. Prepared for in-feed conveyor Max wood length up to 6 meter

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. Dcedpjh Icf Usfx Aanek STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Dcjdpfx Aaswwr Eaensk Guide bracket, etc.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-maintained HIT arc conveyor / board or panel separator, robust design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with slat carriers, 6x2, 2 pairs. Integrated edge roller conveyor. Transfer cross conveyor, can be raised and lowered. Slab flap. Drive with SEW geared motor with brake. Arc conveyor bolted in the middle for transport. Dcjdpfsxl Edijx Aanok Disassembled and ready to be loaded onto a truck. Ideal for use before a double edger or stacking system.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 280 mm, turning length: 1,430 mm, turning diameter: 500 mm, spindle bore: 82 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 7 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,430 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 7 rpm, rotational speed (max.): 2,200 rpm, total height: 1,620 mm, total length: 3,330 mm, total width: 1,750 mm, quill diameter: 75 mm, quill stroke: 150 mm, overall weight: 2,700 kg, chuck outer diameter: 250 mm, spindle nose: CAMLOCK D1-8, center height: 250 mm, bar diameter (max.): 82 mm, Controller FANUC 0i-TF Plus (5) Fanuc manual guide 0i 3-jaw self centric chuck dia 250 mm (manual clamping Spindle motor with frequency regulator 7.5 kW 4-tools electric turret Tailstock with quill MT4 Dcodpfxsxxyhce Aansk Fully enclosed splash guard Coolant system with tank Automatic lubrication system Safety switches on the doors Formal CE norm for EU

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, grinding belt width: 75 mm, grinding belt length: 2,000 mm, grinding belt speed: 30,000 mm/s, total height: 1,205 mm, total length: 956 mm, total width: 581 mm, overall weight: 110 kg, grinding width: 75 mm, warranty duration: 12 months, Universal belt grinder UTBS-75 Dcodpfxex N Sv As Aansk

Condition: used, Board packing mechanization. The line includes: - board hill, - roller conveyor brings boards to one end, - cross conveyor with separation function, - board packer, - liner cassettes, - board package elevator, - output conveyor chains. Material length up to 1.8 m. Dcodpfx Asv Ebcxoanjk Manufacturer Kallfass Country of manufacture: Germany