Optimization cutting saw

STROMAB TR-500 MATRIX-6000

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Gsdshw Ng Ijpfx Af Djbh Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: like new (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 180 mm, feed length X-axis: 3,200 mm, The KP 900 EasyCut cut-off saw is a suitable solution for companies that process solid wood and place maximum emphasis on the quality and yield of their production. It is used to cut out defects and optimize lengths. On average, up to 900 bm/hour can be processed on this saw. (for material with a length of 4 m with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The optimization saw KP 900 EasyCut is suitable for production, which is focused on cutting accuracy, minimization of cargo waste, speed but also safety of work. The advantage of the machine is a high degree of flexibility in the input and output dimensions of the processed material. Controlling the saw is intuitive and special software facilitates programming and entering cutting parameters. KP 900 EasyCut has extended mechanization options at the output. Device functions Length optimization The function consists in minimizing waste and maximizing the yield of the assortment. The inserted material is optically scanned by the binder and automatically precisely laid out on the cross-section of the specified lengths of the selected program. The optimization system then always prioritizes the cut of the longest specified length that fits into the inserted material. The saw automatically measures the length of each inserted piece, so it is not necessary to sort the material in advance by size. In the case of marked defects, the material is optically divided into individual pieces by the binder (from defect to defect) and these pieces are again separately optimized for length. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Qualitative optimization - waste The essence of this function is that the operator performs a visual assessment of the cut piece and marks with two perpendicular lines the places with defects that must be cut out with special chalk. By moving the binder with special optics over the cut material, the current positions (chalk strokes) of the necessary cuts are recorded. The resulting parts in different lengths (from defect to defect) are automatically length-optimized and cut to the required lengths using the software according to the cutting program. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Solid and massive construction with a robust cover of the cutting area guarantees high work safety. Quality of individual components, material and processing ensures trouble-free operation of the equipment and a long service life in demanding working conditions. Material flow In the basic design, the saw is LEFT oriented, i.e. material flow is from right to left. Gbedpfev Iz Rnsx Af Deh Automatic loading system is a combination of sophisticated printing equipment and optics. The system is an integral part of the entrance table. It moves along a precise linear rail with bearings and ensures very precise positioning of the workpiece in the cut (up to ±0.1 mm). Thanks to the optical integrated system, the loader reads the length of the material, marked defects and quality. Clear touch 15" display

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Gbodpfxjx Dmavj Af Dsh Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Gbodpfsxmk Ddjx Af Djh Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Weight 1500 kg Total power requirement 8 kw Gbjdpovz Hz Eofx Af Deh

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6237 - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg Gjdpswnh N Nsfx Af Debh - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels