Wide belt sander

SCM SANDYA UNO

Condition: excellent (used), functionality: fully functional, overall weight: 1,050 kg, grinding height: 160 mm, working height: 900 mm, height adjustment type: electric, Wide belt sander SCM Sandya Uno RCS Working width: 900 mm Rsdex Rf Diopfx Af Sjl Working height: 3–160 mm Number of sanding units: 2 Unit with metal roller Combi unit with pad Main motor power: 7.5 kW Optical oscillation Two feed speeds: 4.5–9 m/min Weight: approx. 1050 kg

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder Rjdpfjgtx Aqjx Af Sel edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. Rjdpfxoxqggce Af Sel (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Code: 0667 Brand: SCM Model: SANDYA UNO/RCS Rsdpjx A A Duefx Af Ssl Automatic wide belt sander with 2 belts (Roller + Pad) for furniture, furnishings, wooden doors and windows, doors and various panels Composition: 1° Group steel calibrating roller 2° Group roller + finishing pad Technical data: Working width mm 920 Working height mm 3 - 160 Sanding belt dimensions mm 930 x 1525 N° 2 belt feed speeds mt/min 4,5/9 Main motor power Hp 10 Infeed and outfeed roller conveyors Electric table lifting Working pressure atm 6 N° 2 suction mouths diameter 160 mm Overall dimensions mm 1500 x 1600 x 1700 h Weight kg 1070

Condition: used, Year of construction: 2009, Empty weight: 2.400 kg Dimensions (LxBxH): 350 x 180 x 165 cm Price: On request Motor lay-out: Under, 5,5 kW Right, 5,5 kW left, 5,5 kW Upper, 7,5 kW Under, no motor, but optional spindel - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: AA2/001125 - Number of spindles [pcs.]: 4 Rodjwnh Irjpfx Af Sol - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 400 - Current consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM Sandya 1K Uno wide belt sander - Combination unit with steel roller and sanding pad Rsdpjx E Ryxefx Af Sel - 2 feed speeds - Belt dimensions: 970 x 1525 mm - Photoelectric oscillation - 7.5 kW motor The machine is in very good condition.

Condition: refurbished (used), functionality: fully functional, Refurbished automatic wide belt sander suitable for solid wood calibration and sanding of veneered panels. The Sandya belongs to the compact range of automatic wide belt sanders from SCM, known for its exceptionally robust and rigid machine frame and excellent sanding quality. 2 sanding units with 11 kW motor each 1. Calibration roller: steel 2. Sanding roller: semi-hard rubber with pneumatic pad — with lifting and lowering function Sanding width: 920 mm Rodevxt D Iopfx Af Sel Working thickness: 3–160 mm 2 feed speeds: 4.5 and 9 m/min Motorized adjustment of working thickness with digital display Ammeter for motor load monitoring Air consumption: 200 l/min Extraction requirement: 3000 m³/h Table extensions Pneumatic belt oscillation Dimensions (WxDxH): 1460 x 1700 x 1750 mm Weight: 1100 kg Excellent technical condition Czech manual available The machine has been fully refurbished, adjusted, and tested.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Rsdotttafjpfx Af Sjl Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: used, working width 900mm calibrating unit with metal shaft kobi unit with rubber shaft and shoe pneumatically shot-in shoe pneumatic oscillation pneumatic tape tensioning star/delta start two feed speeds Rodsw Dq D Uopfx Af Sel electric table adjustment up/down material thickness gauge

Condition: excellent (used), Wide Belt Sander SCM Sandya Uno Working width: 900 mm Working height: 3–160 mm Number of sanding units: 1 Unit configuration: COMBI metal-shoe Main motor power: 4 kW Optical oscillation Abrasive belt dimensions: 930×1525 mm Rsdpfx Asxlq Imef Sol Weight: 830 kg

Condition: reconditioned (used), 3-AXIS DRILLING & MILLING CENTER WITH FIXED RIGHT-ANGLE HEAD, DUAL HORIZONTAL SPINDLES Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Machine offered in working condition, reconditioned, without warranty) TECHNICAL SPECIFICATIONS: - Working area: Between lateral stops along X: 2650 mm Electro-spindle axis X travel: 2903 mm Electro-spindle axis Y travel: 1240 mm Vertical drilling bits Y travel: 1018 mm - Max. panel size for double-station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y axes vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 HP) - Spindle rotation speed: 4,000 RPM - Spindle taper type: M 10 - Machine weight: approx. 2,800 kg COMPONENTS: WORK TABLE: 4 beams for support suction cups L=1000 mm for automatic round suction cups with aluminum bodies (2 per beam) 2 additional universal supports H=25 mm 4 suction cup supports for contouring Rjdpfx Afew E Hb So Sel VACUUM PUMP with a capacity of 100 m³/h Centralized extraction conveyor Automatic centralized lubrication for X & Y axes Pneumatic workpiece support device for tables L=1000 mm MILLING: HSK 63 electrospindle with increased power of 7.5 kW - Rotation speed 1,500/24,000 RPM controlled by inverter - Right and left rotation selectable via CNC - (1) HSK 63 cone with (straight) tool holder included - Collet not included (tools not included) Rear tool changer magazine with 8 positions: R8L - Can hold 8 tools, each up to Ø 120 mm - Each toolholder seat supports up to 4.5 kg - Maximum total weight of tools and holders for magazine "R8L": 22 kg HORIZONTAL UNIT WITH 2 OUTPUTS for MILLING and GROOVING: - Rotation speed: 9,000/18,000 RPM - Motor power: 3 kW (4 HP) - Milling tool (front output) max. Ø 20 mm - Usable length of front milling tool: 110 mm - Milling tool (rear output) max. Ø 12 mm - Usable length of rear milling tool: 80 mm - Blade Ø 100 mm DRILLING: 12 independent spindles for vertical drilling (7 along X and 5 along Y) 3 independent heads, each with 2 spindles for horizontal drilling: * 2 heads along "X" (64 mm pitch) * 1 along "Y" INTEGRATED OPERATOR GROUP for FIXED disc cutter, for grooving along "X" - Disc cutter rotation speed: 4,000 RPM - Motor power: 2.2 kW - Disc cutter max. Ø 120 mm - Compressed air consumption: 150 nl/min - Extraction port: Ø 160 mm PC-OFFICE (Hardware configuration): - Operating system: Windows XP - 15" CRT color monitor - QWERTY keyboard - INTEL CELERON microprocessor, 2 GHz - 40 Gb hard drive - 128 Mb RAM - 3.5" floppy disk drive, 1.44 Mb - 52x CD-ROM drive (Machine offered in working condition, reconditioned, without warranty)