Window angular centre

SCM Multiflex + Vivaldi EU68mm

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Nledpsympx Ujfx Af Esh

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Nodpjlnanwofx Af Eelh

Condition: excellent (used), Altendorf F45 elmo panel saw 280 cm sliding table, cuts full-size panels Duplex mitre guide included Nljdjyq E Iyopfx Af Esh Blade tilt and height electrically adjustable Right-hand fence motorized, adjustable up to 1340 mm 2-axis scorer, electrically adjustable 5.5 kW motor 4 cutting speeds adjustable via belt Max. blade diameter 350 mm Used machine in very good condition

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 K Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Nlsdpfx Aowc A R Dof Esh Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes Nedpfx Afjb A Rg Ss Eelh -Weight including pallet: 346 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Nsdpfoumci Sex Af Eslh Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Nledpfxsn Slk Ue Af Eoh Transport dimensions 11000x2400x2000 mm weight 9 tons

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping Nlodpfx Aoqvml Rsf Ejh 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table