Multi blade saw

SCM M 3

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Iedpfxehp Rc Ie Af Sotr width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Ijdpshpbxisfx Af Sstr Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Itsdsvvi Scepfx Af Sor

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right revolver ruler setting of 6 types three rows of anti-recoil pawls Ijdpfjg Tdfdox Af Sotr possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: used, Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW Itodpsvu U Itjfx Af Ssr - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2001, machine/vehicle number: AB145642, MULTIRIP SAW SCM MOD. M3 – CE RULES - Year of manufacture: 2001 - Serial number: AB145642 - Power supply voltage: 400 V / 50 Hz - Motor power: 18.5 kW - Blade rotation speed: 4,200 rpm - Maximum blade pack width: 300 mm - Conveyor belt width: 300 mm - Maximum blade diameter: 350 mm - Minimum blade diameter: 200 mm - Minimum workpiece length: 390 mm - Blade bore diameter (shaft): 70 mm - Keyway dimensions on blade shaft: 20 x 5 mm - Distance from machine base to first right blade: 200 mm - Conveyor feed speed: continuously adjustable from 6 to 48 m/min - Conveyor type: with direct-joint spheroidal cast iron pads - Conveyor guide rails: low-friction, one with prismatic profile for perfect straightness - Conveyor lubrication: automatic - Clutch: present on feed speed variator - Working table height from floor: 750 mm - Working table dimensions: 1,530 x 950 mm - Dust extraction port for blades: Ø 200 mm - Dust extraction port for conveyor: Ø 120 mm Ijdswr Elpepfx Af Sjtr - Air volume extracted (at 25 m/sec): 3,850 m³/h - Programmable fence: with turret stops, pneumatic positioning via foot pedal - Laser reference: for cutting line - Base frame: made of single-block cast iron

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Ijdpfx Afsxlnpne Sotr

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Itodpfet Amc Ijx Af Ser

Condition: like new (used), I sell the multirip saw of italian production SCM M3. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 300mm. Open design / possibility to insert wider workpieces Motor approx. 20KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator. Total weight approx. 2500kg. Blades and adjusting rings included. Feeding band very good condition. Ijdpfxovll Eks Af Setr The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), chain width 300mm cutting height 120mm max blades diameter 350mm Itedpfx Aow A Hz Hsf Ssr variable regulated feeder manual regulation of pressure rolls manual regulation of shafts connection 380V

Condition: good (used), Year of construction: 1989, GABBIANI SA/350 Multirip Saw Track width: 300 mm Shaft width: 300 mm Max cutting height: 120 mm Max blade diameter: 350 mm Blade bore diameter: 70 mm From above: 2 rows of pawls + Smooth pressure shaft, sliding + Pressure roller + Shaft with saw blades + 2 smooth, sliding pressure shafts + From below: Iedpfx Afoxn Szme Sjtr Guide + Pawls + Track (chain feed) + 2 feed speeds + Main motor approx. 35 kW Feed motor 1.3 kW Central lubrication + Table size (L/W): 2000x710 mm Dimensions (L/W/H): 2400x1350x1350 mm Weight: 1360 kg

Condition: excellent (used), Year of construction: 2006, track width: 300 mm cutting height: 120 mm max. disc diameter: 350 mm Itsdpewxrrvsfx Af Sor motor power: 30 kW table width: 750 mm feed adjustable via frequency inverter fence adjustable pneumatically

Condition: excellent (used), SCM M3 multi-track saw Width of track 300mm Cutting height max 120mm Main engine power 37kw Feed speed adjustable on variator 6-45m/min Disc diameter max/min 350/200mm Ijdpfxsm Rg Dgs Af Sstr Maximum piece width 1000mm Minimum workpiece length 600mm 3 rows of anti-rejection latches Spindle diameter 50mm Bushing diameter 70mm Central track lubrication CE certificate Extraction spigot 200mm

Condition: ready for operation (used), Technical characteristics Gooseneck for all widths Blade diameter : max 350 mm Cutting width: 350 mm Cutting height: 120 mm Drive by notched belt: 5 to 45 m/min Belt width 300 mm Motor 18.5 kW Feed 1.5 kW Top pressers and splinter guard Lubrication of the belt Ijdpetn H Elofx Af Setr Infeed guide 4 pressure rollers Ideal for packaging, mass production, pallet manufacturing, etc. Power and Motors Pluging: Three-phased Power: 20 Kw Motor: 25 CV Overall dimensions

Condition: excellent (used), Track width: 300 mm Minimum length of workpiece: 390 mm Itedpfjwndqisx Af Ssr Minimum width of workpiece: 12 mm Minimum height of workpiece: 8 mm Maximum width of workpiece: 950 mm Saw blade diameter: 350 mm Blade bore diameter: 70 mm Spindle speed: 4200 RPM Main motor power: 35 HP (approx. 25.7 kW) Variable feed speed: 6–48 m/min Table dimensions: 1530 × 1100 mm Machine weight: 1800 kg Year of manufacture: 2008 Certification: CE