Flow controller - 3 pieces

PSG, Wittmann Durchflussverteiler FSM

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Dusdpfxewm Ii To Affst Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Dsdsvf Ig Dspfx Affjut Equipment / Additional information: Car inspection stickers were last produced

Condition: good (used), Year of construction: 2006, Motan Dossier unit Dsdpfsucg Dkex Affeut Year of manufacture approx. 2006 Without display

Condition: used, Year of construction: 2006, Motan dryair tank + Heating LBA 300 – H-O-O-Z Duedeqnuh Hspfx Affjt year 2006 Contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2007, overall weight: 115 kg, hopper volume: 6 l, The Motan material separator can only be used in conjunction with an bypass compressor. The bypass compressor is not part of the offer. Payment: 100% prior to delivery Manufacturer: Motan Type: Metro HBS06-1ABA-AAA-A-A Condition: gebraucht CONVEYING DEVICE: Abscheider Conveying capacity: - Hopper volume: 6 l Connection diameter: 40 mm (Materialleitung) Total installed power: - Other equipment: Spannung: 24 V, neuer Filter + Filterhalter CONTROL: Multifunktions-Panel METRO HBS Dodpfxeiacrmj Affjut Bedienungsanleitung: deutsch GENERAL DATA: - Total weight: 11,5 kg Total size L x B x H: 34 x 38 x 70 cm

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen Duedpeu U Ey Isfx Affot ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Dedpfxjuqd Nuo Affout Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Dedpfx Afjxqzkpofjut Manufacturer: MOVACOLOR Type: The Balance There are 3.0 pcs. dosing units available.

Year of construction: 2025, condition: ready for operation (used), An unused Technotrans temperature control unit is available. Connected load range: 8kW-9.5kW, heating capacity range: 7.5kW-9kW, cooling capacity: 23kW, circulating medium: water, max. operating temperature: 95°C, max. operating overpressure: 0bar, filling volume: 10l. Documentation available. On-site inspection is possible. Dusdpox Tuncjfx Affot

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. Dujdpsmcbk Ujfx Affot • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture