Primultini band saw with mm flywheels. 1000

Primultini

Condition: new, Year of construction: 2024, Type of device/machine SAW PLANT Podo Ad E Uvspfx Abajrc - Manufacturer PRIMULTINI - Type SLH - 1800 - Year 2024 TECHNICAL STATE - The sawmill consists of: - Band saw PRIMULTINI type SLH 1800 , year 2024 - PRIMULTINI stroller year 2024 - Transporters pcs. 2 PRIMULTINI, year 2024 - The sawmill is new and has not yet been installed - According to the above findings, the sawmill should be in technically correct condition

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - shaft width 500mm - number of knives 3 pcs - shaft guard - table length 2530mm - cast iron tables - both tables adjustable - original cast iron guide, adjustable to an angle - motor 3kW - dimensions (L/W/H) 2530x1000x1100mm - weight 920kg ADVANTAGES - made in Italy - 3-knife shaft - used thickness planer - very good condition Predpfxszxx Eaj Abasc Net price: 8900 PLN Net price: 2070 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: refurbished (used), functionality: fully functional, Refurbished Primultini double-arbor multi-rip saw, model MRA, for ripping timber lengthwise. The machine has a 110 kW motor on each of the lower and upper arbors, inverter-controlled variable feed speed (8–45 m/min) and a control panel with a 10.4" touchscreen. Arbor position, cutting thickness and feed speed are shown on an electronic display. The photos show the actual equipment offered. Technical data: Maximum cutting height: 160 mm Maximum cutting width: 550 mm Minimum workpiece length: 1500 mm (1200 mm with wooden comb) Minimum workpiece length: 800 mm Conveyor belt width: 600 mm Passage width: 850 mm Motor power (lower and upper arbor): 2 x 110 kW Saw blade rotation speed: 3500 rpm Feed motor power: 5.5 kW Variable feed speed with inverter: 8–45 m/min Prodpfxsz S Azke Abasc Electric arbor and press movement Pressure rollers with pneumatic pistons and adjustable pressure Centralized automatic lubrication Control panel with 10.4" touchscreen Electronic display of arbor position, cutting thickness and feed speed Electronic device for automatic feed speed deceleration in case of high power absorption by the 2 main motors PLC with touchscreen

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Overhauled tensioning machine 2025 - for blades with widths up to 210 mm - mounted on a sliding carriage with flywheel drive for tensioning along two parallel lines along the blade length - tension pressure adjustable and controllable gradually - includes a hammer for correcting possible imperfections, with straightness ruler (flatness) - 0.75 kW motor - table with 4 legs for supporting the blade Psdpfx Ajw Ewd Debaorc

Condition: refurbished (used), functionality: fully functional, /// MONOBLOC COLUMN MODEL 1300/ SHF - Cast iron structure with stabilization treatment. - Cast iron flywheels, ellipsoidal shape, flywheel diameter 1300 mm. - Flywheel width of 165 mm for maximum blade width of 180 mm. - Flywheels with solid discs with special ribs to enhance mechanical characteristics, subjected to stabilization treatment; modeled with a double curvature for the best stability on the table; perpendicular to the axis of rotation. - Tilting the upper flywheel to adjust the blade thrust. - Hydraulic blade tensioning with tension indicators. - Main motor 55 kW (75 HP), automatic star-delta start, pulleys, belts and brake - For 180 mm wide canvas ///Carts hydraulic PRIMULTINI with 4 MORSE - 4 hydraulic morses - Max. clamp blade distance 1000 mm - Maximum needle opening 900 mm - Simultaneous hydraulic clamps - Fast and precise movement of clamps - Electronic module 2026 for control MOVEMENT clips - return arms - Hydrostatic advance - Automatic centralized lubrication with pump - Double control unit with seat - Cables ELECTRICAL and electrical panel - Flat and profiled rails for a maximum cutting length of 6 m Pjdpfx Abszmfrcoaorc MANUFACTURER PRIMULTINI ITALY - REFURBISHED LIKE NEW 2026 OPTIONAL: -Log ramp, length 4 m..... 20,000 eur excluding VAT -Log loading arms on the log saw trolley hydraulically operated with a single cylinder..... 20,000 eur without VAT - Conveyors with ROLLER for unloading - length Approx. 7m , width 1m ..... 20,000 eur excluding VAT SECOND UNLOADING ROLLER -length 6.3 m approx. ..... 20,000 eur without VAT

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, overall weight: 11,500 kg, transport length: 11,800 mm, input voltage: 380 V, transport height: 2,200 mm, transport width: 2,400 mm, Equipment: documentation/manual, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND LOG SAWMILL with loader and unloader 1) SE 1100 COLUMN 1100×120 mm flywheels for 130×7500 mm blades electric blade tensioner and blade guide Predpfxoz Rvdpe Abasc 60 hp engine with automatic starter 2) CEA-IEA CARRIAGE 4 vices with electric clamping and release vice opening 900 mm 3 hydraulic log turners electric spacers with two speeds hydraulic feed with cable rail length 16.5 m control panel 3) COMPLETE AUTOMATION INCLUDING: - 5000 mm 3-way log loader with 4 loading arms - unloading system with 6500 mm motorized conveyor with helical rollers (for side or longitudinal unloading) with 2 pneumatic log handling arms 4) FOUNDATION DRAWING AND OPERATION AND MAINTENANCE MANUAL - disassembled by specialized technicians, ready for loading - transport dimensions: open-top semi-trailer or 40″ open-top container - weight 11,500 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Vertical log bandsawline Primultini with side chippercanter, from 2016, max log length 7,2 m, diam 20-100 cm Vertical log bandsaw Primultini 1400SHF-CEI Prodpfx Absz N Tdwjaoc Chipper canter Primultini WSF Saw Path cleaning machine Multiripsaw Paul KME3-1012-L Loginfeed and conveyors between machines Operating Electronics Line stands under power and can be started-up for demo without logs

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW Prjdpfxev R Edqs Abaoc 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: good (used), Primultini band saw Roller diameter: 1300 mm Roller width: 140 mm with Planomatic system Pjdpfed Sclhsx Abaerc

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Power: 55 kW Prsdpfx Aoztk Atjbaoc Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.