Dove tail joints machine

OMEC 650 M

Condition: good (used), Code: 0106 Gbedpfx Agorc Dgms Seg Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm Gbodpfxjwka S Ie Ag Sog - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Gbodpfotrl R Ajx Ag Sog Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, working width: 400 mm, brushing unit diameter: 210 mm, total length: 1,350 mm, total width: 900 mm, total height: 1,540 mm, height adjustment type: mechanical, overall weight: 500 kg, extraction nozzle diameter: 100 mm, workpiece height (max.): 315 mm, workpiece width (max.): 400 mm, Aging and brushing machine VALMEC Master 400 Specification: • Condition – new • Manufacturer – VAL.MEC • Model – Master 400 • Working width – 400 mm • Max working height – 315 mm • Brush diameter – 210 mm • First brush – steel • Second brush – tynex • Motor power – 2 x 3.0 kW + feed 0.37 kW • Motor startup – 0-1 • Conveyor speed steplessly adjustable via inverter, range 4–12 m/min • Rear brush rotation direction reversible • Independently adjustable height for each unit • Dust extraction outlet – 100 mm diameter • Weight – 500 kg • Complete documentation from the manufacturer • Overall dimensions 135 x 90 x 154 cm (L x W x H) Additional information: • Machine is brand new, in factory condition • The pictures shown accurately represent the actual condition of the item for sale Gbjdpfx Agouwdb Eo Sjg • Machine available within 7 business days

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter Gsdpfem Sgvzex Ag Sjbg for finger joint milling machine HK200 and HK400 50 kW

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Condition: factory-refurbished by Osama Technologies Features and technical specifications: - Automatic gluing machine with two rollers - Working width: 1000 mm - Usable working thickness: 0-100 mm - Application rollers Ø 185 mm - Feed speed: 24 m/min Gbjdswkbb Dopfx Ag Sog - Working table height: 800 mm - Roller groove spacing: 2 mm - Motor power: 0.37 kW - Glue distribution tank made of painted sheet metal - Water tank made of galvanized sheet metal - CE marking - 400 V / 50 Hz / 3 phase Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2002, 900mm steering wheels Electronic speed variator for advancement Maximum cut height 370mm Gsdpfxox Iku Ie Ag Sebg Motor 15kW 380V

Condition: refurbished (used), saw band length: 6,980 mm, saw band width: 100 mm, total height: 2,200 mm, total length: 90 mm, total width: 80 mm, table height: 82 mm, working height: 82 mm, roll diameter: 200 mm, height adjustment type: mechanical, space requirement height: 2,200 mm, power: 18 kW (24.47 HP), saw blade length: 6,980 mm, Wheel diameter: 915 mm, Blade width: max. 100 mm, Max. roller blade opening: 230 mm, Feed unit Motor: 18 kW, Variable speed from 10 to 45 m/min, Gbedpfxoxy Id Is Ag Seg Cutting angle: 0-45°, Requires a small pit

Condition: not inspected (used), Year of construction: 1995, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Gsdpfxoq Iipxe Ag Sjbg Infeed table length 2000mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Year of construction: 2022, condition: new, Press hydraulic 6 six meters automat for fingerjointing line lignum Press hydraulic 6 six meters automat for fingerjointing line lignum Second hand 2022 Make: Press hydraulic 6 six meters automat for fingerjointing line lignum Model: Press hydraulic 6 six meters automat for fingerjointing line lignum Description: Godpfx Aoimwx Eeg Sebg press hydraulic 6 six meters automat for fingerjointing line lignum .iNPUT TRANSPORT band output automat proces .More infomation plese send for mail Year: 2022