Window tool 70/95 OERTLI SCM

OERTLI

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway Ledpfx Ajmgc I Nof Sjak - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Lajdpfxet R T Hcs Af Sek Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, Work and Assembly Table New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm Laedpfx Aokwhwzsf Sok 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Lsdpfx Aovu Hfqjf Soak Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Laodpfsh H Iyxjx Af Sjk Unirex 3000 machining center Univar 15 Unitex 15

Condition: new, Work and assembly table Worktop made of solid sheet metal equipped with high-quality workbench (can be removed using screws) Easy back-friendly work thanks to height adjustment using a foot pedal Perfectly aligned using the 4 adjustable feet, very easily using an Allen key Continuous height adjustment and 3 fixed working heights Optimal handling thanks to 4 swivel castors with parking brake Regional quality From conviction - 5 year guarantee Load capacity 300 kg Height 400 - 1010 mm Worktop length 1485 mm Worktop 1700 x 790 mm Useful stroke 610 mm Weight 140 kg Front pliers 520 x 70/190 mm (size/span) Side pliers 460x140/145 mm (size/span) Lajdpfx Afjvymfhe Sjk Availability: short term Storage location: Flörsheim

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg Lodpfxsb A Rg Ss Af Soak

Condition: used, Year of construction: 2002, Weinig four-sided planer Lasdpfx Aexg Nbusf Sok max. planing width 230mm max. planing height 120mm Digital positioning 5 stations + 1 output unit for rounding or chamfering Total power 43kw 380V

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Lsdpsxyik Ajfx Af Sjak Possible to supply with Weinig moulder infeed and outfeed