Shredder

MeWa UC 120

Condition: new, Year of construction: 2024, ♻ The MONSTER is a hybrid machine with two shaft PRE- SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets, styroform, plastic, waste, scrap and electrical devices. ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 2072 x 1070 mm ✔ Dimensions L/W/H: 3,73/1,78/2,67 m ✔ Weight: 4200 kg 2 years warranty or 2000 working hours Gsdpfx Agohwwplj Sjil

Year of construction: 2021, condition: new, OSTAS PLATE ROLLER TYPE 4R OHS 1570 X 200 - 4 Rolls - Capacity 1570 x 9 - Hardened rollers - Diameter above roll 200 mm - Diameter under roller 200 mm - Diameter side roll 180 mm - Hydraulic system - Digital display for movement left roller - Digital display for movement middle under roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roll positioning - Hydraulic up and down movement system with middle and side rolls - Hydraulic balancing system - Overload protection - Documentation - 400V Giedpfx Agogg N R He Sol CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: used, Intake opening: 1.200 x 1.600 mm Gedjbq Stqepfx Ag Soil Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: new, Hopper opening: 2.500 x 2.000 mm Rotors: 2 pcs. Rotor flight circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg Gjdpfx Agebq St He Sjil

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm Gisdpfx Ajwd Ii Ujg Ssl - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Year of construction: 2022, operating hours: 150 h, condition: new, capacity up to 8000kg/std with grinder 5,5kW with shredder belt (plastic chain) speed steplessly adjustable Powerful blower Giodpfe Hnafsx Ag Sol Cleaning water circulation pump

Condition: ready for operation (used), Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022. Gsdjn Tpm Aepfx Ag Soil

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Gijdjxtqxbepfx Ag Sel Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: like new (used), Year of construction: 2020, operating hours: 967 h, functionality: fully functional, machine/vehicle number: 90135010410, total length: 4,300 mm, total width: 2,070 mm, total height: 3,040 mm, overall weight: 9,000 kg, hopper volume: 3,000 l, rotational speed (max.): 10 rpm, blade width: 40 mm, torque: 40,000 Nm, power: 88 kW (119.65 HP), rotor width: 1,350 mm, input voltage: 400 V, type of input current: three-phase, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, Two-shaft rotary shear ES 90/135-D with base frame, hopper, and control cabinet Siematic S7 1212C. Gisdpfew E H Npjx Ag Sol

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Godpfx Aju Tha Ieg Soil Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.