Used Schaffer 5680 T for sale (13,063)

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, Functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Djlqswd Ni Aeztqmsut Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck

Condition: used, Year of construction: 2016, swing diameter 560 mm turning length 1.400 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° spindle head 6 DIN 55026/55021 ISO 702/1 bar capacity 65 mm spindle diameter in front bearing 110 mm turning speed range - spindle ~ 5.000 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C - Axis 0,001 ° Number of Turrets 3 turret (x-stations) 3 x 12 pos number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 9,4 kW Torque 19 Nm travel -x axis 140 mm travel -z axis 1.375 mm rapid traverse X-axis 22,5 m/min rapid traverse Z-axis 45 m/min feed power X/Z: 9.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm Dslqztjwb Hx Ajqmjut rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N tool taper 30 x 55 mm DIN 69880 total power requirement 108 kVA weight of the machine ca. 14 t dimensions of the machine ca. 8,0 x 2,6 x 2,5 m CNC Turning- and Milling Center INDEX G 250 - INDEX WHD 200/14 Workpiece Handling System Chuck parts max. 200 mm in diameter Length up to approx. 200 mm Shaft parts max. 80 mm in diameter Length up to approx. 400 mm Workpiece weight max. 2x 10 kg Max. workpiece projection: 150 mm (at 10 kg) Two-jaw double gripper for blanks and finished parts Longitudinal gripper travel Z: max. 5,200 mm Gripping stroke Y: max. 300 mm Electric rotation axis 23 degrees Electric gripper rotation angle horizontal axis 4x 90 degrees Double gripper travel per gripper jaw 20 mm - Schnaithmann Pallet Handling System (Type BS) 20x workpiece carriers 240 x 200 mm

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Dujlqov Ehbbjztqmst Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Year of construction: 1994, Condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank Djlqztodkx Aneqmeut - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, bale weight: 273 kg, machine/vehicle number: X0721-016, GPS GREAT SCRAP PROCESSING SOLUTIONS BALER Fully automatic two compression baler for production of high-density bales. This baler will produce a very high-density bale and is suited for both ferrous and non-ferrous scrap. Dslqzowc U Axetqmeut 2021 G.P.S. Great Scrap Processing Solutions Model: 80 2C XL Automatic Baler, 400-480V, 3-PH, Total Install Power: 110 kW, Working Pressure: 280 Bar, First Compression Cylinder (Thrust): 140 t, Side Cylinder (Thrust): 140 t, Machine Noise Level:

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC Dolsrtrxijqztqmsut * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: used, total power requirement 1 kW weight of the machine ca. 0,2 t Djlqztsv Sdytsqmjut dimensions of the machine ca. 620 x 720 x 400 mm m

Year of construction: 1985, Condition: excellent (used), Stamping Press used in the fabricación of vehiclís, 2 fully automated lines, each consist of 5 preses, 1x1600 T, 2x1000 T, 2x500 T, with robots, can be sell as complete line or individually Dslsfxxu Toqztqmsut

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Dolqztjul Efmjqmout Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Dujlqzjr Ngtfstqmot Tools recentely grounded. Bending angle preselection via potentiometer

Condition: used, mileage: 600,699 km, Year of construction: 1990, Serial number: YS2RH6X2Z0114xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19850 Specifications - 1990 model - 600,699 km - Not Eu-approved - Manual transmission - Repair item - Tires (see pictures) - 6x2 - Front suspension: steel - Rear suspension: steel - Bogie lift - Hiab crane - 14 t/m Hiab - 2 Hydraulic extensions - 2 Manual extensions - Length on plan: 6,465 m - Ready for delivery Dslqztqov U Svhjmjut Description: We have a 1990 Scania R143 H 6x2 Timber truck Repair item w/ 14t/m Hiab crane aggregate. The car is being sold as repair item as it is not Eu-approved and is therefore in uncertain condition. Both car and crane work, but some additional costs must be considered. Ready for delivery. Km: 600699 Technical approved: no Own weight: 10400 Total Weight: 27500 Payload: 17025 Width: 250 Length: 896 Gearbox: Manual

Year of construction: 2008, Condition: refurbished (used), Used Winkworth model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Approximate capacity 400 litre (product dependent). Mixing chamber measures approximately 1,300mm long x 800mm diameter. T-Arm ploughshare blades driven by approximately 22kw motor and gearbox. Unit includes (1) stainless steel side entry chopper driven by approximately 7.5kw motor. Has provision for a second chopper. Unit has centre bottom pneumatically operated flap discharge valve. Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items. Dolqzskx E Txetqmsut

Year of construction: 2002, Condition: used, grinding diameter 10-300 mm grinding length 650 mm centre height 175 mm Duolqeva I N Ueztqmjt Control total power requirement 12 kW weight of the machine ca. 3,7 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1977, Functionality: fully functional, USED Webster Bennett CNC VTL with twin rams and Siemens 820T Year of Manufacture 1977. Retrofitted in 1995 – SERIAL NUMBER 6826/1 MACHINE CONSTRUCTION & FEATURES  TWIN RAM TYPE 2-AXIS VERTICAL BORING & TURNING MACHINE.  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY HARDENED & GROUND SLIDEWAYS TO PROVIDE INCREASED STABILITY & RIGIDITY.  3 STEP AUTOMATIC GEAR CHANGE.  SIEMENS 820T CNC CONTROL. Dujlqzswhqmdjtqmjt INCLUDED FACTORY FITTED MACHINE OPTIONS  MANUAL 4-JAW COMBINATION CHUCK WITH 4 MANUAL ADJUSTABLE JAW BODIES  CHIP CONVEYOR & CHIP BUCKET INCLUDED TOOLHOLDERS  SET OF CAPTO C6 TURNING HEADS CAPACITY Maximum Turning Diameter Ø 3,650 MM Maximum Turning Height 2,130 MM Maximum Workpiece Weight 20,000 KGS TABLE Table Diameter Ø 3,050 MM Table Speed 0~ 60 RPM Table Speed Range AUTOMATIC 3 STEP RAM HEAD Tool Size 32 MM² Spindle Taper ISO 7/24 #50 Ram Cross Section 220 x 220 MM TRAVEL & FEEDRATE Left hand ram travel – U Axis (Saddle Horizontal) 3,911 MM Left hand ram travel – X Axis (Saddle Horizontal) 3,911 MM Z-Axis Travel (Ram Vertical) 965 MM Vertical Travel of Crossrail 1200 MM Maximum X / Z-Axis Cutting Feedrate 0-3,000 MM / MIN X / Z-Axis Rapid Feedrate 3,000 MM / MIN POWER SOURCE Input Power Supply 415V / 50HZ / 3PH DIMENSIONS & WEIGHT Height 5,650 MM External Width (With Chip Conveyor) 6,000 MM External Depth 4,700 MM Weight 48,800 KGS

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Bcfed2Md7M Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Dueljwhquujqztqmet Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm weight of the machine ca. t 3 support arms Dslqzjr Ngtietqmjut 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: used, Year of construction: 2014, operating hours: 10,871 h, Field of application: Construction Serial number: 57xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20031 Introducing a well-maintained 2014 Volvo G946B grader, ready for new assignments! With 6-wheel drive and many practical features, this grader is an excellent choice for both large and small projects. Specifications: - Hours: 10,871 hours (can increase) - Weight: 20,650 kg - Transport length: 9 meters - Transport height: 3.23 meters - Speed: 40 km/h Equipment: - Approved and everything in order - Lots of extra light all around for better visibility - Additional rear hydraulics for flexible applications - 4 almost new tires in the rear and good tires in the front - Front cutterbar with a width of 299 cm - Center cut with a width of 425 cm Duslqztqsv U Thfomjt - Central grease for easier maintenance - Webasto for heating - Radio - Steering mode VKL for optimal maneuverability PS!  New engine and gearbox at 5000 hours !! ( done by Volvo) The grader is still under a service agreement, ensuring that it is well maintained and ready for use. It can be put straight into operation without delay. Delivery: The Grader is delivered by agreement with the owner. Hours: 10871 Total Weight: 20650 Km/t: 40

Condition: like new (used), Year of construction: 2000, Used Kemutec Kek model 200 EC Stainless Steel Jacketed Ribbon/T-Arm Mixer. Has approximately 200 litre working capacity and 215 litre total capacity. Mixing trough approximately 565mm diameter X 860mm long. Has hinged lid and end cover. Internal rated atmospheric pressure at 50 degC. Cantilever design with bolted double ribbon mixing blade belt driven by 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 reduction ratio at approximately 53 rpm. Includes spare double ribbon and t-arm mixing blades. Has provision for chopper but none fitted. Includes centre bottom discharge with valve. Has stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. Mounted on mobile base. Dslqjiwytcoztqmout Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: good (used), PUMA50/E-500 Power (T) 55 Crow's neck depth (mm) 500 Steel capacity (mm) Ø40x10 Cylinder stroke (mm) 0 - 60 Working height (mm) 810 Motor power (kW) 5 Oil tank capacity (L) 45 PUMA55/E-500 Dimensions (L x W x H) (mm) 1930 x 1200 x 1800 Weight (kg) 1885 Duelqztqev Rgizjmot

Condition: used, Manufacturer: Olsa Model: – Year: – Quality: stainless steel Capacity: 1000 litres Stirring: 4,5 KW Duolqztqsvlynmemot Motor speed : 710 – 1440 rpm Internal pressure (bar): unknown, pressure possible. Air input Pressure gauge and inside pressure holding valve Double jacket: yes Heat insulation: yes T°C control hot / cold: solenoid valves Note: cleaning of interior marks possible in case of sale

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t Duslqzovr Hf Ejtqmet dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: like new (used), Used Kemutec Kek model 400 PE stainless steel Ribbon/ploughshare mixer. Has approximately 400 litre working capacity. Currently fitted with T-arm mixing blades driven by electirc motor/gearbox. Includes spare stainless steel plough blade mixing shaft. Has (1) side chopper with electric motor. Includes centre bottom discharge with valve. Mounted on mobile base. Djlqzjiwytgetqmeut Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic and France to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is Duolqsv Nw Npeztqmjt very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Used Jenbacher type JMS 612 GS-N.L gas powered CHP plant made in 2011 that is used for tri-generation; cooling, heating and power production within the same process. Cooling is done by absorption chillers. Rated 2004 kWel, 4551 kWt (479 Nm3/h of natural gas), gas flow 2.79 kg/s, gas temperature 410 degrees Celsius, 1500 rpm, inlet air temperature ambient + 10 degrees Celsius, 50Hz, 6300 V. Delqjwhyhdoztqmout Equipment includes: - Heat recovery boiler, water tube, gas flow 2.79 kg/s, gas inlet temperature 410 degrees Celsius, gas outlet temperature 120 degrees Celsius, outlet water temperature 101 degrees Celsius, inlet water temperature 90 degrees Celsius, recovery power 953 Kw(t). - Absorption chiller, refrigeration power 1000 kWt, hot water flow 78.5 m3/h. - Plate heat exchanger in 316 stainless steel for production of hot process water from hot water produced in the heat recovery boiler. - Air Cooler. - Cooling Tower. More details on request.

Condition: good (used), Year of construction: 2007, max. wheel diameter 1200 mm control Siemens 840 D radial slide travel 0 mm maximum axial offset 1000 mm table diameter 800 mm Dolevnv Arsqztqmjut table hole 182 mm spindle turning speed - stepless 1200 - U/min clamping length 1550 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,5 x 3,8 m