Used Tabe Agb-30 for sale (24,978)

Condition: good (used), machine/vehicle number: 2674, Year of construction: 1999, load capacity: 12,000 kg, lifting height: 6,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,300 mm, total length: 4,820 mm, total width: 2,500 mm, operation weight: 17,500 kg, additional equipment features: Dual tread, Warning triangle, Centralized greasing system, Fire extinguisher, Equipment: lighting, SveTruck 1260-30 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 11.00-20 Bjdpfjyuhqxox Ammjdg Wheel size – Steering wheel: 11.00-20

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm Bsdpetmtzkofx Ammsdg feeding length: max. 240 mm output: max 400/min

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Bjdpfotzg H Djx Ammsdg Scope of delivery  - Electrical panels for tanks and pumps - Stainless steel tank | model DFF99 | 2000 | 25,000 liters - Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) - Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) - Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp - 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters - 2x Fermentation tank | 3,000 liters - 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters - Open tank - Low tank | model STORK TGSW - Filter | model PSF JB | 2017 - Grinder | model OOEHLER OL 6000 | 2016 - Silo and feeder - Resistance tank | model PROMINOX | 2016 | 3,000 liters - 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters - Filter tank | model PROMINOX | 2016 | 4,500 liters - 2x Pump | model MIM GRUP FL31Cl - Pump | model CALPEDA MXH 204/A - Industrial scale | model GRAM MISSIL F2-60 - Pump | model LOWARA HTB 32-125/30 - Pump | model ABB INOX MIM GRUO FLUID-102 - Industrial sink - Refrigeration chamber - Pump | model PYD SH2-40 - Osmosis system | model HIDROTEC - Water treatment system - Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 - Compressor | model INGERSOLL-RAND 11BAR | 2001 - Boiler | model ATTSU RL-400/12 - Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999

Condition: reconditioned (used), functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, stroke length: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. Bdodpsvkfmrofx Ammjg PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Central lubrication. Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: - Drilling capacity approx. 30 mm - Drill spindle mount MK 3 - Drill spindle speeds in 2 stages, stepless 80 - 1400 rpm Bdeded Ingfjpfx Ammjg - Table surface 390 x 420 mm - Drilling unit height-adjustable by hand crank - Min. / max. distance table / drill spindle 220 / 580 mm - Drill spindle stroke 150 mm - Drill spindle overhang 280 mm - Drive 400 V / 1.3 / 2.3 kW - Space requirement approx. W 480 x H 880 - H 1200 x D 1050 mm - Weight approx. 250 kg - Table base with storage space W 600 x H 910 x D 800 mm - Weight 200 kg

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Numerical Control ( CNC) NC 21, Software Homatic Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Bjdpfx Aoh Nx U Njmmodg Min. useful working width (mm) Max. useful working width (mm) 3000 Max. useful working tickness (mm) 100 (ca.) Max. depth of the panel (mm) for automatic infeed 1250 Distance between center-axes of the disappearing dogs (mm) 1000 Adjustable (min/max) feeding speed (m/min) 8 - 25 (ca.) No. 4 Working groups (for each machine's side): 1 Jumping Scoring Unit (1 x Kw 1,5 ca.) 1 Hogging Unit (1 x Kw 4,5 ca.) 1 Jumping Milling Unit (1 x Kw 4,5 ca.) 1 Free Space

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm Bodpfx Aet Ucgasmmjdg - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: Bdjdpfx Amst U R H Uomog • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: Bdodpfx Aoidmkrjmmog KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, laser power: 30 W, Laser engraving machine with 30-watt laser power - Laser source: 30-watt CO2 metal tube Demonstration machine with minimal operating hours - Includes Windows 10 Pro 64-bit PC system - Includes 22" monitor - Everything is pre-installed and adjusted - Engraving software in German - Very easy to use - Simply switch on and start - CO2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving possible - Wobble function - For engraving on e.g., wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for smoke extraction - Engraving area approx. 180 x 180mm - Expandable up to approx. 300 x 300mm - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Bodpoirmgmjfx Ammjdg Sales are exclusively to business customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition Bdsdpfxsyi Am Rs Ammeg • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 Bsdpfx Amsu Tln Nemedg - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Bdodpfx Amezp Ip Asmeg Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Bdedpfxozrn Ahe Ammog Location: 65618 Selters (Taunus), Germany.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, - Year of manufacture: 1999 - In very good condition, immediately ready for operation - 3 compression stages - Package size: 300 x 300 mm Bedpfx Amjztxdrsmjdg More detailed technical data is available upon request.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Drum brakes = More information = Bdodpeztrgyefx Ammjg Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Registration number: OJ-12-YP

Condition: excellent (used), functionality: fully functional, total length: 160 mm, total width: 30 mm, overall weight: 70 kg, type of input current: three-phase, Dimensions of the treadmill belt: Bsdpfoztfnqjx Ammedg Length: 160 cm Width: 30 cm Speed control

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, Bdsdpfx Amezh I Agomsg table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg Bjdpfx Ajzk H A Dsmmsdg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: Electro-hydraulic drive Vertical press cylinders: 3 Vertical cylinder stroke: approx. 130 mm Vertical cylinders adjustable via a perforated grid Horizontal press cylinders: 2 Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Medium-pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: at short notice Bedpfx Aozk Nkdommjdg Location: 63934 Röllbach

Condition: like new (used), Year of construction: 2023, RHTC hydraulic workshop press HF-2 in good condition. Specifications: Pressing force: 30 tons Maximum pressure: 374.6 bar Cylinder stroke: 160 mm System capacity: 1.65 liters Fixed cylinder Working width: 565 mm Weight: 165 kg Bdsdpfx Aozivkzsmmeg Professional quality, suitable for pressing bearings, bushings, axles, and other workshop tasks. Laser roller stand also for sale. Price: €1,250 excluding VAT.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details. Bdjdpfxoy T R D Hj Ammsg

Condition: good (used), Year of construction: 1996, Machine will come with tool holders. Parts shown by hand not come. Technical details shown on picture. Bdsdpfx Ajzncpzjmmsg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94 2055, Offer 26226 Technical data: - Pressing force 220 t - Working width 3050 mm - Clearance between the uprights 2550 mm - Table height 950 mm - Overhang 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW Bsdpfszrtyfex Ammedg - Ground clearance - Space required approx. B 3500 x H 2950 x D 2000 mm - Machine weight approx. 17500 kg - Two-hand control panel with foot switch - Rear stop adjustable from the front via handwheel - Various bending tools

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder High-stack feeder, 70 cm SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Spare knife set Electronic double-sheet, misfeed and stitch wire detection Bjdpszrxfgjfx Ammjdg 3 Hohner stitching heads, Universal 43/6 S Compressors Approx. 11.9 million stitches