Used Daewoo Solar 015 for sale (63)

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO type DAFL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - Without drive, the device is pushed by hand or the machine is pulled by the brush drive Machine length: 1200 mm Pjdoxr N U Espfx Aahogg Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Very good condition, as good as new - unused - Original packaging

Condition: used, Torni CNC Pgodpfx Aajw Slx Usheg Doosan Puma TW2600 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Pgjdpfx Asxrgglsaheg

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Podpfx Aetzgaqsahjgg Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck - 48V 3PZS 375AH - DIN B + 1-year warranty + includes automatic filling system (Aquamatik) + includes end cable & REMA 320 connector (other connectors can be installed on request) + Capacity: minimum 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,030 mm Width: 349 mm Height: 627 mm Weight: approx. 580 kg Compatible with the following models and others: Daewoo BR14 Daewoo BR14 JW Pgjdpfjwzuzrsx Aahjg Daewoo BR16 Daewoo BR16 JW Fpsbqvmgyjwqdq Isyoi Mitsubishi FB15TCA Common battery sizes available on request. Transport available.

Condition: used, Year of construction: 2008, DAEWOO DOOSAN PUMA 400 M LATHE Psdpexxur Aefx Aahjgg YEAR OF INITIAL INSTALLATION 2008 AUTOBLOK SELF-CENTERING STEADY REST CNC Model: Fanuc CNC Version: 21i-TB Main spindle power: 30 / 37 kW Main spindle chuck diameter: 315 mm Main spindle bar capacity: 95 mm Swing over bed: 770 mm Swing over carriage: 590 mm Turning diameter over bed: 560 mm Turning length: 1105 mm Main spindle speed: 20 – 2,500 RPM Number of tool turrets: 1 Number of tool stations on first turret: 12 Number of driven tool positions on first turret: 12 X-axis travel (first turret): 362 mm Z-axis travel (first turret): 1105 mm Tailstock: Yes Chip conveyor: Belt type Tool presetter: Yes Number of driven toolholders supplied: 5 (3 axial + 2 radial) Machine in excellent condition.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: FANUC, controller model: Series 21i-MB, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTRES YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Length: 4,110 mm / Width: 3,190 mm / Height: 3,100 mm Spindle: Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 11/15 kW Working Capacity: X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 625 mm Distance spindle centre–table top: 75 / 775 mm Distance spindle nose–table centre: 150 / 775 mm Table: Table size: 1,400 x 650 mm Table load capacity: 1,000 kg Feed Rates: Rapid traverse X / Y axes: 24,000 mm/min Rapid traverse Z axis: 20,000 mm/min Cutting feedrate X/Y/Z axes (linear interpolation): max. 8,000 mm/min Tool Changer: Tool taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Max. adjacent tool diameter: Ø 90 mm Psdpfx Aaoxxlifehjgg Max. alternate tool diameter: Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Other: Manuals, electrical diagrams, and CE Declaration Chip conveyor, coolant tank (300 L) Automatic high-pressure cooling system through the spindle line at 20 bar Transformer MACHINE OVERHAULS PERFORMED: - New Y-axis ball screw, including bearing replacement - X-axis ball screw overhauled, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes - Complete spindle line overhaul with belt, seal, and bearing replacement - Complete replacement of X and Y axis lubrication system - Complete internal repainting and Lexan replacement - Full overhaul of telescopic covers on X/Y/Z axes

Condition: new, Year of construction: 2022, Daewoo, DAFL50A, 2022, scrub machine, brand: Daewoo; type: DAFL50A; year: 2022; NEW, NEVER USED, working width: 850 mm; electric: yes; hours on display: 0 hr; battery charger: yes; electric connection: 220 V; own weight: 160 kg; total dimension L: 1100 mm; total dimension W: 540 mm; total dimension H: 1020 mm; description: internal charger, unused, works on battery, batteries included; LOCATED IN POLAND Pgodpfeh Nuy Aox Aahog

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Turret Number of tool stations: 12 MACHINE DETAILS Pgodpfx Aoxrz Ukoaheg Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Workpiece catcher Box with collets 5x additional driven tools Bar feeder

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, overall weight: 7,500 kg, SPECIFICATIONS Longitudinal travel: 1020 mm Cross travel (Y): 510 mm Vertical travel (Z): 575 mm Pedpfow S E Ngox Aahegg CNC type: SIEMENS Table length: 1200 mm Table width: 500 mm Max. permitted weight: 800 kg Number of tools: 30 Spindle taper: ISO 40 Max. spindle speed: 8000 rpm Spindle motor power: 15 kW Dimensions (L x W x H): 3275 × 2948 × 2996 mm Weight: 7500 kg Year of manufacture: 2001

Condition: used, functionality: limited functionality, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: poor Front tires type: Superelastic Front tires condition: 0 - 20% Rear tires type: Superelastic Rear tires condition: 0 - 20% Description: Engine defective Sideshift, 3rd valve, front work light, full free lift, dual tires, Pgedpfx Aaevcf Rnshsg

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Technical book with characteristics of machine is in attachment. Pedolyrbzspfx Aahjgg

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, Pgsdpfowx I Efsx Aahog swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories,

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Pgodpsw Tc S Ujfx Aahog Technical details are shown on picture.

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Psdeqfm A Aspfx Aahogg Mimu machine tools Italy

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Pgjdpfowb Aqnsx Aahjg

Condition: new, Power 7,5 KW Receiver 500 L Pgodpfx Aou Imfzjaheg feed pressure 14 bar liter capacity 995 l connected load frequency 400 V weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 0,7 x ,125 m

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Pgedpeidabkjfx Aaheg Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: new, rated capacity 8,1 kVA voltage 400 / 230 V frequency 50 Hz tank capacity 15 l engine output 11 / 15 KW / PS weight of the machine ca. 0,165 t dimensions of the machine ca. 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. Pgedpfxju Imgfs Aahjg - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function.

Condition: good (used), Engine freshly overhauled (over 12tys zl). Pgsdpett T Nfsfx Aahsg 100% operational I invite you to contact me

Condition: used, CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t 10 tool turret tailstock Pgjdpfx Aast Ip Uksheg bar feeder The machine can be seen under power in our warehouse (M i m u)

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, area performance: 6,380 m²/h, overall weight: 396 kg, input voltage: 220 V, total height: 1,300 mm, total width: 1,250 mm, total length: 1,600 mm, water tank capacity: 40 l, battery voltage: 48 V, battery capacity: 65 Ah, Daewoo DS 80 Bj. 2025, new machine Pgsdpfxjwhixls Aahog

Year of construction: 2022, condition: new, rated capacity max. 8,1 kVA Podpfst Smitsx Aahjgg capacity in kVA bei 400 V - 7,5 kVA rated capacity bei 230 V - 6,1 kVA power fuel Diesel 0 tank capacity 15 l 0 11 KW cubic capacity 498 ccm weight of the machine ca. 0,165 t dimensions of the machine ca. 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,260 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, table width: 700 mm, table length: 1,400 mm, table load: 1,200 kg, rotational speed (max.): 6,000 rpm, Heidenhain TNC 426 CNC Longitudinal travel X: 1.260 mm Transverse travel Y: 650 mm Pgjdpfx Aew E Nl Hoahog Vertical travel Z: 560 mm Table length: 1.400 mm Table width: 700 mm Maximum table weight: 1.200 kg Tool magazine: 30 tools Spindle mount: ISO 50 Maximum rotation speed: 6.000 rpm Machine complete with: • Remote electronic handwheel • Instruction manuals and CE declaration

Condition: used, - “DAEWOO” ACE V50P vertical machining center – Pallet changer – 30 stations for tools on chain – availability of over 40 tools/tool ​​holders, some of which are reamers with micrometric adjustment and 3 tool holders with tank for lubricant/coolant liquid - CNC Fanuc - machine still installed in the workshop, operational until 2021 - availability for any test - use and maintenance book - Price and detailed technical characteristics on request - Psdpfx Asnr R A Ieahogg