Used Gesan Dp 250 for sale (11,698)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment Gjdpov Uqwdjfx Agvjkb - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Gsdpfxoy Rgl Ue Agvjkb Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, power: 132 kW (179.47 HP), Drum chipper, Rudnik & Enners. Type TH 250-300/650/5 Drive motor 132 kW Infeed height 300 mm Lower infeed rollers: 3 pcs. Upper infeed rollers: 2 pcs. Including vibrating screen, 8 m long, with drive, overhauled; 1 screen, 7.5 m long, and 1 screen, 10 m long, not overhauled. Metal detector. The machine has been out of service since 2014 and has been completely overhauled. Ready for immediate use. Godpfx Ajy R Nblsgvskb Control system available.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. MTP LATHE CQ6280 800x1500 WITH DIGITAL READOUT Manufacturer code: CQ6280 800x2000 with display LATHE CQ6280 800 × 1500 mm The machine is designed for machining workpieces, most commonly rotational solids (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical Data: Max. turning length: 1500 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing in gap: 1035 mm Z-axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16 steps) 25–1600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022–0.74 mm/rev Feed Z-axis: (25) 0.044–1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock adjustment: 11 mm (0.4") Metric threading: (54) 0.45–120 mm Diametral threading: (42) 0.88–160 DP Module threading: (46) 0.25–60 mm Whitworth threading: (54) 7/16–80 TPI Main motor power: 7.5 kW Power supply: 400 V Gkodeyzzghepfx Agvsb Dimensions (L×W×H): 3240 × 1140 × 1910 mm Weight: 2600 kg Equipment: 3-axis digital readout (DRO) 3-jaw chuck Ø 320 mm 4-jaw chuck Ø 400 mm Faceplate Ø 450 mm Drive plate Splash guard Cooling system Fixed steady rest max Ø 250 mm Traveling steady rest Chuck guard Reduction sleeves Dead center Tool set

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 14200229, Equipment: documentation/manual, The labeller is equipped with a Domino V 220i thermal transfer printer. Both are in like-new condition. Gsdpfjygv Hxox Agvskb

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm Gkjdpfxoywzv Ie Agvob - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. Godpfx Ageyz Ubxjvekb For 15 years, we have focused on quality, precision and reliability. MTP METAL LATHE 800x3000 7.5 kW SPINDLE BORE 105 Packaging condition: original LATHE CQ6280 800 x 3000 mm The machine tool is designed for machining workpieces, most commonly with rotational geometry (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical data: Max. workpiece length: 3000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing over gap: 1035 mm Z1 axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16) 25 – 1,600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022 – 0.74 mm/rev Feed Z-axis: (25) 0.044 – 1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock offset: 11 mm / 0.4" Metric threading: (54) 0.45 – 120 mm Diametric threading: (42) 0.88 – 160 DP Module threading: (46) 0.25 – 60 mm Whitworth threading: (54) 7/16 – 80 TPI Main motor power: 7.5 kW Power supply: 400 V Overall dimensions (L x W x H): 4740 x 1140 x 1910 mm Weight: 4300 kg Equipment: • 3-axis digital readout • 3-jaw chuck Ø 320 mm • 4-jaw chuck Ø 400 mm • faceplate Ø 450 mm • drive plate • fixed splash guard • cooling system • steady rest max. Ø 250 • follow rest • chuck guard • reducing sleeves • dead center • tools

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Gkjdpszdbtxofx Agvsb Type: VTC 250 LEAN Year of manufacture: 2010 Control: Siemens 840D sl Technical data: Max. turning diameter: 140 mm Max. turning length: 700 mm Max. swing diameter: 376 mm Main spindle: Max. speed: 5,000 rpm Max. torque: 256 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 1 Number of tool positions: 5 + gripper / 11 + gripper Max. tool diameter: 125 mm Max. tool weight: 10 kg Max. tool length: 120 mm Max. workpiece weight: 20 kg Feed rates: Rapid traverse (x / z): 40 / 30 m/min Total power consumption: 45 kW Machine weight: approx. 12 tons There are 6 identical machines available. Technical features & accessories: - Open automation - Safety device - Preparation for extraction - Handling infeed and outfeed - Central extraction (not included) - Central coolant supply (not included) - Chip conveyor (1 for 3 machines) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is mentioned in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Seydelmann KK 250 AC-6 Continuous Cutter New second spare motor included!!! Manufacturer: Seydelmann Model: KK 250 AC-6 Serial number: 10144-1 Year of manufacture: 2010 Gkjdpfx Agoxc Nn Toveb Motor power: 205 kW Current: 368 A Power supply: 400 V / 50 Hz Weight: 1900 kg

Condition: excellent (used), Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Gksdpfx Agszy Ib Tovjb Price: On request

Condition: used, Year of construction: 2002, functionality: fully functional, Conveyor Belt SCHUMA PRO-WA500/2000/300/S20 (2002) Godpezhuziefx Agvekb Dimensions (m): 2,5x0,51x1,35 (LxWxH)

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Gkjdpfx Agjd I Az Ssvjb Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quill Travel 150 mm Quill sleeve Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Distance between Cneter 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Gkjdpfed I A Daex Agvsb Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Gsdpfxod I A Auj Agvokb Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Gkjdpfx Asxgcx Tjgvsb Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - bimetal The machine has been regularly serviced by the authorized Boy service center in France. It is possible to change the screw diameter to fi 32 mm or 42 mm. Dimensions: Gjdpfxezy H Sqo Agvokb Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/Motor: 11 kW Heating power: 7.7 kW Total power: 18.7 kW All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Gjdpfozy H S Djx Agvskb Price: Upon request

Condition: good (used), functionality: fully functional, Description: Gkjdpovyrq Aefx Agvjb Screw compressor ZR 250 1998 Characteristics: Capacity 7.50 bar Power 245 kW Voltage 500 V

Condition: used, Year of construction: 2003, machine/vehicle number: 3945, functionality: fully functional, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Gkjdpfx Ageyn Rgvjvjb Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: used, Year of construction: 2018, TSUGAMI M08SY-II CNC lathe Gksdpfx Aezy Hm Uegvsb Fanuc OiTD with Manual Guide 2 x C-axis powered tools Axis travels: X: 221 mm Z: 400 mm A: 506 mm Y: ±50 mm Main spindle max 4,500 rpm A2-6 7.5/11 kW (10/14.8 hp) Counter spindle max 4500 rpm 5.5/7.5 kW (7.4/10 hp) Max turning diameter 280 mm Max turning length 380 mm 12-station turret Chuck 210 mm Spindle bore 65 mm Parts catcher LNS chip conveyor Documentation Tool holders

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons Gedpjzdbtfefx Agvekb There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2020, Boy XS / Excellent technical condition Year of manufacture: 2020 Injection unit: Screw diameter: 12 mm Shot weight: 4.1 g Injection pressure: 3128 bar Dosage volume: 4.5 ccm Clamping unit: Clamping force: 10 t Tie bar spacing: 160 mm Size of mounting platens: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 4 - Touchscreen Additional equipment: Machine as new Euromap 67 Robot interface Air valve x 6 Integrated side sprue picker Automatic Wittmann loader with Farratech brand dryer Optional: AMF brand clamping elements for tooling available for purchase Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m Gjdpfozy H Swsx Agvekb All offered machines are started up by our service technicians prior to sale. A video of the technical inspections of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Gjdpfez Ahmzex Agvskb Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Capacity 7.50 bar Gksdevyrtdepfx Agvob Power 245 kW Voltage 500 V

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Godpfxjd I A Dhs Agvekb Dimensions 2500 x 1100 x 1380 mm