Used Gesan Dp 250 for sale (21,263)

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, worktable width: 1,700 mm, worktable length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Belqzajvvlyij Rxewl Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: reconditioned (used), Functionality: fully functional, Rühle Frozen Meat Cutter Typ GFR 450 / 250 Bslqza Rev Ub E Sexowl KW 5,5 4 cross cutter

Condition: refurbished (used), Year of construction: 2015, Bungartz UMOS 3624AD/250/200-GS - Delivery rate 270 m³/h - delivery head 32m - Speed 1450 1/min - Year of manufacture 2015 - goods for shipment Bolqza Rephmkzjxswl - delivery possible against surcharge

Condition: excellent (used), Year of construction: 1991, pressing force: 250 t, operating speed: 240 mm/s, Used Rhodes Hydraulic 250ton Hydraulic Press for sale 250 / HDS New PLC in March 2023 - BEIJER ELECTRONICS PRESSURE 250 TONNES MAX. STROKE - VARIABLE 30 мм TO 500 мм SLIDE SPEEDS - APPROACH 240 MM/SEC PRESSING - 22 MM/SEC. RETURN - 230 MM/SEC 2 DIE CUSHIONS - FORCE 35 TONNES / CUSHION STROKE - 200 M MAX. SERIAL NUMBER Bwelqzajvt Agnj Rxjl YEAR OF MANUFACTURE 1991 250 TONNES MAX. 35 TONNES / CUSHION

Condition: excellent (used), CTS Type: TSS-70/130 Bjlqzjtql H Asa Rxswl CTS water-cooled temperature shock test chamber Type series TSS -70/130 Test chamber volume 130 liters Test chamber dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature operating range: Temperature range in °C : Hot chamber +50/+250°C Cold chamber -80/+100°C Retempering of ICs < 15 min in kg 10.0 Car changeover time in sec. < 10 Max. test weight in kg 50 Temperature constancy over time in K ± 1 Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load in kW approx. 16.6 Condenser chiller water-cooled Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Feed-through Ø in mm 125 Refrigerant: R404A/R23 Weight: 950 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), FOR SALE VENEER PRESS: JOOS 130/250 CM 4 CYLINDERS ELECTRIC HEATING Bjlqzjv Smbtja Rxowl AFTER RENOVATION VERY GOOD CONDITION

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel Bwslqou N Ddwsza Rxel accessory: - foot plate 2200x1500x40mm *

Condition: good (used), Perini vertical slotting machine. Tool stroke 0-250 mm. Bwjlqzasv Am Nxs Rxel Tilting head. Cross table with integrated divider plus spindle. Excellent conditions.

Condition: refurbished (used), Year of construction: 2016, Bungartz UMOS 3624A/250/200 Bwjloqhqihjqza Rxol - Flow rate 241.2m³/h - Delivery head 13m - Speed 960 1/min - Year of construction 1963/2016 - Forwarding goods - Delivery possible for an additional charge

Condition: used, Functionality: fully functional, machine/vehicle number: 462956, Temperature control device for plastic injection molding applications and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 13.7 kW Current: 21 A Volume: 11 liters Flow temperature: 250 °C Frequency: 50 Hz Dimensions: 88x32x96 cm Total weight: 150 kg The Regloplas temperature control device model 250/12/F30/1K/RT45 offers a reliable and precise solution for temperature control in industrial applications. With its compact design, it is ideal for use in tight spaces without sacrificing performance. The device combines advanced heating and cooling systems that enable precise control of the process conditions and thus contribute to the quality assurance of your products. The intuitive control ensures easy operation and adaptation to different requirements, while the robust design guarantees a long service life. Bwjlqzsvc Dqyoa Rxel With fast response times and efficient energy use, the 250/12/F30 not only optimizes your production processes, but also helps reduce operating costs.

Condition: excellent (used), Here we offer a bird heat cabinet with nitrogen supply. Vötsch heat cabinet with nitrogen supply Nominal temperature: 250°C Name stream: 10 A Connection value: 6.3 KVA Nominal voltage: 400V3coma N)PE AC 50/60hz Nominal power: 6 KW Type: TU 60/60 G-ISO Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you. Bslqzed Ngg Toa Rxswl

Condition: good (used), Year of construction: 1994, cutting height (max.): 250 mm, saw blade diameter: 400 mm, cutting width (max.): 500 mm, chain width: 540 mm, working height: 250 mm, power: 0.09 kW (0.12 HP), DOUBLE SHAFT CIRCULAR SAW COSTA MOD. LEONE 2/250 2X90 MKW HIGH MM 250 Bjlqsq E U Ixjza Rxewl

Condition: used, Technical details: stroke: 45 mm dayligth: 205 mm Belqza Rsu N A D Asxjwl throat: 92 mm Pressing power: ca. 2 kN table-size: 120 x 160 mm distance between table / ram: max. 205 mm dimensions L x W x H: 0,24 x 0,17 x 0,8 m Total weight, approx.: 23 kg The height of the plunger can be adjusted by loosening the Allen screws to 140 mm using the hand crank. Plunger holder Ø 10mm with return spring Base with 2x clamping hole Ø 12mm *

Condition: used, Outer-Ø: 315 mm Overall height: 70 mm Length of the adjusting screws: 200 mm Thread: M 30 x 2 maximum permissible static load: 11000 kp maximum load in general: 8000 kp Bwjlqzaebx Eiuo Rxol

Condition: good (used), Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters Bwslskahk Doqza Rxel -Filter: RT-Filter RMS-80 -Filter capacity: 80 l/min -Level indicator: -Dimensions total: 490/250/H565 mm -Weight: 23 kg

Condition: used, Functionality: fully functional, machine/vehicle number: 462958, Temperature control device for plastic injection molding applications and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 13.7 kW Current: 21 A Volume: 11 liters Flow temperature: 250 °C Bjlqza Rovc Dpcjxswl Frequency: 50 Hz Dimensions: 88x32x96 cm Total weight: 150 kg The Regloplas temperature control device model 250/12/F30/1K/RT45 offers a reliable and precise solution for temperature control in industrial applications. With its compact design, it is ideal for use in tight spaces without sacrificing performance. The device combines advanced heating and cooling systems that enable precise control of the process conditions and thus contribute to the quality assurance of your products. The intuitive control ensures easy operation and adaptation to different requirements, while the robust design guarantees a long service life. With fast response times and efficient energy use, the 250/12/F30 not only optimizes your production processes, but also helps reduce operating costs.

Condition: new, Year of construction: 2022, operating hours: 15 h, tire size: neu, front tire size: neu | 0%, rear tire size: neu | 0%, Tires (v):new, tires (h):new, operating hours:15_____demonstration model 150 operating hoursThe JMB-M-WK+ is an environmentally friendly weed and moss killer on a trailer that can also be used as a high-pressure cleaner. By using hot water technology, weeds and moss are effectively controlled without pesticides. Thanks to the "TC" system in the low-pressure range (= WK function), the machine delivers a constant water temperature of 99 °C on the surface. The machine can be used by 2 people at the same time. The cover must remain closed during operation. This extends the service life of the machine and reduces noise pollution (less than 85 dB). New and advanced: operating element with digital control and joystick function. PRODUCT FEATURES 12 hrs. Use Digital operation via joystick GreenBoiler heat exchanger High-quality material Modern design Radial piston high-pressure pump Stage 5 ready TC system High-tech heating system: 110 kW GreenBoiler for increased efficiency > 92 % Up to 18 % fuel savings Low CO2 emissions Low maintenance costs 110 kW GreenBoiler + 20 kW through heat exchanger = 130 kW heat output Radial high-pressure pump with 3 ceramic pistons and stainless steel valves 12 V voltage for the electrical control and burners Automatic regulation of the engine speed depending on useMaximum speed regulation depending on use of high pressure / "WK" function (weed control function) Automatic speed regulation of the engine speed after 30 s (idle position) Built-in water tank 450 l Infinitely variable pressure and flow regulation by means of speed control: Electronic pressure relief when gun is closed / P-Zero valve in accordance with standard EN 1829-1 and 2 Water softening system with fill level monitoring Automatic pre-heating TÜV approval for 100 km/h Accessories included:Simple stainless steel spray lance with high-pressure nozzle and swivel fitting (= 250 bar) 25 cm - Stainless steel weed lance with temperature sticker for weed control (Note: JMB-M-WK+ = 2 pieces) 50 cm - Weed lance made of stainless steel with temperature sticker for weed control High-pressure spray gun with swivel joint: great maneuverability Safety: heat-resistant gloves, storage location: Gondelsheim hall Boljp Nz E Uoqza Rxjwl

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Beautiful condition. 2 units in stock, very high specification machines. New cost in excess of EUR 300,000 Bslqzaoifk Ico Rxjwl We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details.

Condition: ready for operation (used), Continuous press Tiger 3000x1400 mm Bolsi Hlf Eeqza Rxewl

Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. t Bslst Ukt Isqza Rxewl dimensions of the machine ca. m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 15 pieces: 1. Demag DKUN 20 - 4000 kg. 2. Demag DKUN 10 - 2000 kg. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag PK 1 N - 125 kg. 9. Demag DKUN 2 - 250 kg. 10. Demag PK 2 N - 500 kg. 11. Demag PKVUN 1 - 125 kg. 12. Demag engine PKUN 1 - 125 / 250 kg. Bwslqza Revv Idwexel 13. Steel T 405 M - 1000 kg. 14. Steel T 302 S - 500 kg. 15. Liftket Star 021/51 - 500 kg.

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm Belqzsu T Tp Uja Rxjwl -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm -Total weight: 75.1 kg

Year of construction: 2004, Condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm - max milling depth 80 mm - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° Bwslqef E Higeza Rxjl - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table underframe - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm Bwelqzst Ukt Uoa Rxel KK 140 fastening: 4 pcs. screws M 16 / 170

Condition: used, diameter 250 mm total power requirement kW weight of the machine ca. 0,05 t dimensions of the machine ca. m Bwolqst Ukufeza Rxjl 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135