Used Pottinger Novacat 442 for sale (283)

Condition: used, Year of construction: 2013, Working width 8.76 - 9.56 m hydr. edge protection folding hydr. support pressure control / quick blade change Parking supports Operation Power Control PTO shaft / Djdst Sr R Aopfx Adujwf

Condition: used, Year of construction: 2008, Quick blade change / Dwodpfxot A Smxe Aduof

Condition: used, machine/vehicle number: 22031, Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 ASerial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Dedpfx Ajiiv S Sodujwf Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2010, First registration: 07.05.2010 / _____ / PTO shaft 540 rpm / lower link pin KAT II / hydraulic reverse swing / drive speed 540 rpm / drum mower with center suspension / Dodpfx Aoqrruxsduewf

Condition: used, Year of construction: 2007, Folding machine MBO Navigator T 800/442 Year: 2007 Description: - 16 page folder Feeder - Round pile feeder - Dualfeed - Pump Buckle folding unit: 1 MBO T800.1-1-78/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 78 cm - Perforating shaft Dsdpfx Asxd Dmyeduswf - Anti noise hood(s) Buckle folding unit: 2 MBO T800.1-2-68/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 68 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 3 MBO T800.1-3-56/2 - Third buckle folding section with 2 buckle plates - Maximum infeed width: 52 cm - Noise hoods for upper folding buckles Delivery MBO SBAP-46-ME - Horizontal stack delivery with pressing and marking device

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft Dedpfx Adjc Idn Ususwf • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Condition: used, Year of construction: 2008, Folding machine Heidelberg-Stahlfolder TH 82/442 Year: 2008 Description: - 16 page folder - Colour monitor with touch screen - Automatic setting Feeder - Round pile feeder - Excluding pump Buckle folding unit: 1 - First buckle folding section with 4 buckle plates - Automatic setting - Perforating shaft - Noise hoods for upper folding buckles Buckle folding unit: 2 - Second buckle folding section with 4 buckle plates - Automatic setting - Perforating shaft Buckle folding unit: 3 Dedpjvu Tqasfx Adujwf - Third buckle folding section with 2 buckle plates - Automatic setting Delivery Heidelberg-Stahlfolder TSH 70 Year: 2008 - Horizontal stack delivery with pressing

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers Dwedpfxodymm He Adusf • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Dwedpjddh Evefx Aduof Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A Dwjdpfxsw Titlj Aduef At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Dodpfjuq Nfhox Aduswf Possible services: delivery, commissioning

Condition: used, Year of construction: 1982, x-travel 390 mm y-travel 330 mm z-travel 380 mm control konventionell table surface area 850 x 255 mm max. table load 200 kg Dwodjw Spbgjpfx Adusf number of T-slots 5x T-slot - width 12 mm H8 T-slot - distance 45 mm turning speed range - milling 63 - 2.800 U/min transmission ratio 12 pos. feed 0 - 1.500 mm/min tool taper SK 40 rapid traverse 1.500 mm/min weight of the machine ca. 1,9 t dimensions of the machine ca. 2,0 x 2,5 x 2,8 m Tool Room Milling Machine Universal HECKLER & KOCH - AM 442

Condition: used, Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 22 mm -Construction: B3 -Protection class: IP 33 Dodpfx Aectlaledujwf -Price: per piece -Number: 1x available -Dimensions: 530/330/H260 mm -Weight: 51 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Dwjdpovt Tyrsfx Aduef Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: good (used), Hexagon Type: Hexagon Optiv Performance 442 Product description: The Optiv Performance 442 3D multisensor coordinate measuring machine combines optical and tactile measurements in one system. The system supports multi-sensor measurements with vision sensor, tactile sensor, TTL laser (Through-The-Lens) and the innovative chromatic white light sensor (cws). The basic device with vision sensor can be modularly expanded with all available sensors. Areas of application: ٠ Use on level ground ٠ Versatile geometry measurements and GD&T analyses with standard accuracy Construction ٠ Design principle: " Low-vibration granite construction with fixed bridge and movable table " Integrated substructure with optional vibration dampers ٠ Guides: " Precise mechanical linear guides in all axes ٠ Drives: " DC servomotors, power transmission via backlash-free ball screws in the center of gravity ٠ Length measuring system; " Incremental length measuring system ٠ Resolution; 0.1 pm Hexagon Optiv 442 multi-sensor measuring device equipped with camera, laser and Renishaw touch probe. Dwsdpeu Szpmefx Adujf - Measuring range single sensor: 410x410x200mm - Dimensions: 1232x910x1663mm - Weight: approx. 940kg - max. load weight: glass plate 30kg - Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) - Max. travel speed per axis: 200mm/s - Camera with 2-stage zoom - laser - LED ring light - Renishaw 6-fold probe changer - Renishaw TP200 touch probe - Monitor operation - Windows 7 Ultimate evaluation station - Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5 % Power consumption 1000 VA Weight: approx. 1100 kg Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation Djdpfx Adedyc Uaoujwf · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine with Mitsubishi CNC control, but with the BAUER user interface, no CNC knowledge is required. SK 40 tool holder, Automatic tool changer for 10 tools, Automatic tool length measurement, DXF and DSTV data import, Handwheel, Pendulum machining (but without light barrier protection), Light barrier on the operator side, Spindle motor 7.5 kW, Spindle speed 200-4000 rpm, Dodpfowhftrex Aduswf 21.5" touchscreen, Additional office software license, Retractable protective hood

Condition: ready for operation (used), Heidenhain UV 105 ID. 344 980-13 SN13442060, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos, used, in good condition, 100% functional, delivery contents as shown in photos. Dwjdpfjx Eti Nox Aduef

Condition: used, 11-bit remote control for mobile screening plants EXTEC/SANDVIK Dwjdpfx Aexz Ez Tjduef

Condition: ready for operation (used), You are bidding on a Heidenhain UV 105 Inverter, part no. 344 980-13, serial number 13442060, offered in exchange (exchange service). The unit has been professionally overhauled, fully tested, and comes with a 3-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Dwjdex Etk Hspfx Aduof Attention: In the exchange process, your returned defective part must not have any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: new, Fanuc A06B-6096-H103 Servo Amplifier Module SN:V05671442, unused in opened original packaging, 100% functional, scope of delivery as per photos Djdji D Uxzspfx Aduowf

Condition: new, Siemens SIMATIC IPC427E 6AG4141-5AB17-0FA0 Microbox PC SN: VPN09553442021, unused, 100% fully functional, scope of delivery as shown in photos. Dwsdpsx Dxlwsfx Adusf

Condition: new, Indramat Rexroth DDS02.2-W050-BE45-01-FW Controller MNR: R911273734 SN:263405-16442, unused in opened original packaging, 100% functional, scope of delivery as per photos Dwedei Ebltepfx Adusf

Condition: new, Siemens 1FT7042-5AK71-1CL2 – Z synchronous servomotor, serial no.: YFK1641442313004, Z=see nameplate, unused in opened original packaging, 100% functional, scope of delivery as per photos. Dwedpfx Adjx Duyqeuof

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 - Z AC-VSA motor Z= see type plate, SN:YFS729644201001, the motor was overhauled at Siemens and then stored for a long time, used, normal signs of wear, 100% functional, scope of delivery as per photos Djdpsi D Sxkofx Adujwf