Used Ajce Ab-350M for sale (14,049)

Condition: excellent (used), Year of construction: 2025, General information Field of application: Construction Reference number: 5 Weights Empty weight: 500 kg Functional CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5~12ton excavator Delivery terms: CIF Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-50H is a Mini Shear with hydraulic rotation. This model is suitable for excavator 5~12 ton. Nedpfx Ajq Ixt Asaxekt ASH-50H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló nůžky saks tesouras foarfece Schere žirklės ножницы forbici

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 3 Drivetrain Make of engine: MS Weights Empty weight: 2.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 25-37ton Delivery terms: EXW Working pressure: 200-250 bar Required hydraulic flow: 150 l/min Production country: KR Nkodpsuc Umyefx Aaxet Additional information Please contact Ö. Inalkac for more information AJCE Europe AS600H grapple is 2000kg and with hydraulic rotation. Standard with double engine, double cylinder and safety valve. It is reinforced model which is suitable for heavy demolition job. We have complete range of selector grapples available from 75kg to 2000kg. Feel free to contact us. We can ship worldwide. grijper, gripen, Pince de Tri, Greifer, Grapin,

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 10 Weights Empty weight: 110 kg Functional CE mark: yes Other information Fits to following machines: 0.8-3ton Delivery terms: EXW Working pressure: 110-140 bar Required hydraulic flow: 40 l/min Production country: KR Nodoq Ixtiepfx Aaxskt Additional information Please contact Ö. Inalkac for more information AJCE AS10H Selector Grapple with hydraulic rotation. The weight of AS10H is 100kg. Also available as non-rotating version. Feel free to contact us for details and other models. We have grapples in stock from 75kg to 2000kg. Grijper, Greifer, Grappin, Gripen, Pince de tri

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 2 Weights Empty weight: 500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-12ton Delivery terms: EXW Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-52H is a Mini Scrap/ Metal Shear with hydraulic rotation and double cylinder. This model is suitable for excavator 5~12 ton. Nsdpfx Aaoq Ixunjxskt ASH-52H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló ножици ψαλίδια nůžky saks tesouras foarfece Schere žirklės ножницы forbici sax

Condition: new, Year of construction: 2026, Field of application: Construction Empty weight: 475 kg CE mark: yes Reference number: 5 Fits to following machines: 8-14ton Delivery terms: EXW Working pressure: 130-150 bar Required hydraulic flow: 100 l/min Please contact Ö. Inalkac for more information AJCE Europe AS45H is 450kg grapple with hydraulic rotation. We have grapples available from 100kg to 2000kg from our Netherherlands warehouse. Also available as non-rotating version. We can ship worldwide. Feel free to contact us for any inquiry. Nedeq Ixtmspfx Aaxskt Grijper, Pince de Tri, Greifer, Gripen

Condition: new, Year of construction: 2026, General information Field of application: Construction Weights Empty weight: 1.900 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18~28ton excavator Working pressure: 320 bar Cutting power: 320 kN Required hydraulic flow: 180 l/min Nodpfxjqmnbwo Aaxokt Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Contact us for details. concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 3 Weights Empty weight: 1.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 10-20 Delivery terms: EXW Transport dimensions (LxWxH): 1,5x1x0,5 Nsdpfx Aasx Ezmiexekt Working pressure: 240 bar Cutting power: 240 kN Required hydraulic flow: 80 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information ACR72H is 900kg concrete/demolition crusher with hydraulic rotation and double cylinder. ACR72H fits on 10-20ton excavator. Feel free to contact us for details. Broyeur, betonschaar, betonkraker, cisaille, cizalla,

Condition: new, Year of construction: 2025, Weights Empty weight: 2.500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Nedpfx Aajq Ixr Ejxekt Identification Reference number: 2 Other information Fits to following machines: 18-38ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH30TT Tilting type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 1950 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30TT is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes, HI Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30TT is Robotic Pile Drivers with Tilting option and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile .

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. Nkjdpfst Irffex Aaxjt • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: used, fuel type: diesel, color: other, first registration: 01/2001, Year of construction: 2001, General Country of production: Zweden Nksdpfxsxv Ddcs Aaxet = More information = Number of cylinders: 6 GVW: 18.000 kg Engine type: Volvo Penta

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials Njdpfxexdvhpj Aaxokt PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, Year of construction: 2022, functionality: fully functional, Compact line for producing open and closed wall elements. Wall length: 8400 - 1800 mm Wall height: 3300 - 2100 mm - Framing table - Randek Bridge - RB3 (CAD controlled) + includes 4 tools. Nkjdpfofg Tb Sex Aaxet - Turning stations with reverse function to do closed panels.

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Nodpfxjtp Thbj Aaxekt Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Nkedpfxovn Tg Ie Aaxjt Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Nkjdovwlqqspfx Aaxjt Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Nedpfx Asu Thhrsaxjkt Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Nsdpfxoxqf Rme Aaxjkt

Condition: new, Year of construction: 2025, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information Nodoq Ixukspfx Aaxokt We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2025, Weights Empty weight: 1.800 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 20-35ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you new excavator mounted Pile driver- Pile Hammer, Vibro Pile hammer, Vibratory pile driver, Vibratory Hammer. This model AJCE AVH30 fits on excavator class 20-35 ton. You don't need Power Pack, that will save you money! The weight is 1800kg. It will be delivered together with special extention boom to connect on the excavator. You can see it on the photos. We have also Side Grip type vibrohammers available. Contact us for details. We can ship worldwide. Nkodpfxoq Ixuve Aaxst - Vibrofonceur Vibrohammer Piledriver Vibro högförare battipalo возач гомиле conductor de pila pilot hromady cölöpverő Rammbock haugesjåfør bate estaca sonetă ciocan vibro martelo vibro vibrohammer martillo vibratorio vibro marteau Vibrationshammer čekić vibro młot wibracyjny vibro plaktukas вибромолот вибро чук

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Other information Fits to following machines: 28-45TON Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Njdev Nhv Hepfx Aaxekt Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2024, General information Field of application: Construction Reference number: 3 Drivetrain Make of engine: Parker Weights Empty weight: 600 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-10ton Nedpfx Aaeq Ixrwsxekt Delivery terms: FOB Working pressure: 230 bar Required hydraulic flow: 90 l/min Additional information Please contact Ö. Inalkac for more information AJCE ACR52H mini concrete crusser is 550kg and fits on 5~10 ton excavator. ACR52H is with hydraulic rotatio, double cylinder and speed up valve. Available from our Netherlands warehouse. vergruizer, pulverizer, crusher, Abbruchscheren, Betonpulverisierer, concasseur à béton, Betonbrecher, trituradora de concreto, дробилица за бетон, kruszarka do betonu, concasor de beton, betongkross, betonknuser

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear internal height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fastening material PRICES: Variant I: Base area: 20 m² | Size: 4,000 x 5,000 mm | €2,137.50 net, plus transport costs and VAT Variant II: Base area: 40 m² | Size: 4,000 x 10,000 mm | €3,979.30 net, plus transport costs and VAT Variant III: Base area: 40 m² | Size: 8,000 x 5,000 mm | €3,874.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Size: 4,000 x 15,000 mm | €5,655.36 net, plus transport costs and VAT Variant V: Base area: 80 m² | Size: 4,000 x 20,000 mm | €7,445.76 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Size: 8,000 x 10,000 mm | €6,986.24 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Size: 16,000 x 5,000 mm | €7,061.76 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Size: 8,000 x 15,000 mm | €9,930.06 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Size: 10,000 x 12,000 mm | €9,671.76 net, plus transport costs and VAT Variant X: Base area: 160 m² | Size: 8,000 x 20,000 mm | €13,063.67 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Size: 16,000 x 10,000 mm | €12,880.98 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Size: 16,000 x 15,000 mm | €18,258.52 net, plus transport costs and VAT Nkodpsxmkwwsfx Aaxet Variant XIII: Base area: 320 m² | Size: 16,000 x 20,000 mm | €23,955.92 net, plus transport costs and VAT Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Collision protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we can design and manufacture your warehouse mezzanine exactly to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the item. This product is available for collection. Delivery or shipping is available at an additional cost. The extra charges depend on the delivery location and shipment size; please contact us for an individual quote. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. All prices are per item/net, as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and craftsmanship. ✅ Four successes – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns/supports - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE TO YOUR SPECIFICATIONS This platform system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended use. TRANSPORT & INSTALLATION We are pleased to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available for an additional charge. Extra costs depend on the destination and scope of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is given per unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice showing VAT. Njdpfxjxmku No Aaxekt ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four wins – the success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Optional accessories: - Safety railings - Flush wall connection - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. Nodpfoxmkuisx Aaxekt ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Upper edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, grade P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available upon request. Our team will be happy to provide advice! Scope of delivery: - Supports Njdpfx Aasxmkqdexskt - Primary and secondary beams - Cross bracing - Flooring - Fastening materials PRICES: Version I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus shipping costs and VAT. Version III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus shipping costs and VAT. Version IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus shipping costs and VAT. Version V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus shipping costs and VAT. Version VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus shipping costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we can design and manufacture your warehouse platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended application. Our design department will prepare an individual, non-binding quotation based on your specifications. Whether for new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The additional costs depend on the delivery location and scope of shipment and can be requested from us individually. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per unit/net price as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, storage platforms, textile warehouses, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at favorable conditions. If you have any questions, please feel free to contact us. ✅ Four Winning Factors – The Four Success Components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions