Used Atlas Ar86 E for sale (472)

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Rsdpfx Afsxpww Aj Sol Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 23,500 h, functionality: fully functional, Inverter compressor with integrated dryer. Fully functional. Approximately 23,000 operating hours. Main features: Rsdoxvcdnjpfx Af Sol Max pressure: 13 bar Power: 75 kW – 100 HP Output per min: approx. 12,500 l

Condition: reconditioned (used), Screw stages for compressors Atlas Copco, Kaeser Redpsxy Aaqofx Af Sjl

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Rsdpfxoulayxe Af Sol Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l Rsdpfju Szluox Af Sol total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. *

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Rjdpfel Tn Epox Af Ssl

Condition: new, Year of construction: 2024, functionality: fully functional, Atlas Copco claw vacuum pump DZS400VSD+ (NEW) from 2024. Oil-free, air-cooled, frequency-controlled. Redsxp N Hijpfx Af Sel

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Rodpfx Afsmzbdws Sel

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA37VSDFF SERIAL NO.: API580058 YEAR: 2009 POWER (kW): 37 CAPACITY (m3/min): 7.25 PRESSURE (bar): 12.5 OPERATING HOURS (DOC/TOTAL): 100392 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes, R404 1.25kg HEAT EXCHANGER: no COOLING (AIR/WATER): air Rsdpfx Ajxyarqjf Sjl ON TANK: no DOCUMENTATION: no CONNECTION: 2'' NEW/USED: USED

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz Rsdpsulaxzsfx Af Ssl For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: excellent (used), Year of construction: 2016, Construction compressor Manufacturer: Atlas Copco Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h - Power: 104 kW Rodswubzrepfx Af Sol - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t

Year of construction: 2020, operating hours: 1,668 h, condition: used, New: No Field of application: Construction Make of engine: Hatz Serial number: ESF206420 Rjdpfxjucrxae Af Sol Transport dimensions (LxWxH): 2.3x1.28x2.49 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Central Compressor System | Atlas Copco GA55VSD Rsdpfx Aoxn Shaof Ssl comprising: - 2 Atlas Copco GA55 VSD+ screw compressors - Each with an output of 55 kW (variable speed, oil-injected, 400V/50Hz, air-cooled), each weighing 876 kg - 2 Atlas Copco FD 220 VSD refrigerant dryers (variable speed, 400V/50Hz, air-cooled), each weighing 143 kg - Compressed air storage tank by Lohenner, capacity 5,000 liters, 11 bar, steel, galvanized, upright design - Oil/water separator OSC 300 Clay Inspection is possible at any time by appointment. #Tags: AtlasCopco | GA55 | FD220

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Rjdpoxk U Arjfx Af Sjl Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA75 VSD Rodpfx Afoxxm Ate Sjl SERIAL NUMBER: API656533 YEAR: 2009 POWER (kW): 75 CAPACITY (m3/min): 14.68 PRESSURE (bar): 13

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale here is a Plug & Play Nitrogen Generation Plant (Nitrogen Generator) Brand: AtlasCopco / AirCo Type: PSAL58SN Year: 2018 Serial No.: 2018-21968 Weight: - Temperature range min./max.: +3°C / +45°C Max. pressure: 300 bar Operating voltage: 400 V Installed in a 40" insulated container with supply/exhaust air, winter/summer mode Activated carbon stage Type AK300 Pre-/Post-filter Type AF267UHU Nordpol Cut System Type 100PlusPan 2 x high-pressure compressors, each 15 kW 2 x nitrogen tanks, capacity 500 L / 1,000 liters each Absorption dryer Type A-DRY-105 2 x Filter Type AF85H 6 x 300 bar nitrogen bundles Rodpoxvtl Nsfx Af Sjl Collection only – disassembly and transport by the buyer or by arrangement If interested or for questions, feel free to send me a message. Additional photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. Net export price For further questions please call Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can handle all customs and registration matters for an additional charge. We can deliver the vehicles to the port for an extra fee.

Condition: good (used), Year of construction: 2005, Screw compressor Manufacturer: Atlas Copco Type: GA 110 Year of construction: 2005 Operating hours: approx. 54,110 h Power: 115 kw Redpfx Aevi Ha Dof Sel Pressure max. 7.5 bar

Year of construction: 2023, operating hours: 1,495 h, condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota Rsdpfx Afeucrwio Sol Serial number: ESF210292 Transport dimensions (LxWxH): 1.16x1.16x2.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 009439, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4.43 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, We are selling a screw compressor that was purchased in 2023. The compressor has been rarely used, is fully functional, and is available for collection. Redpfx Aexxipijf Sjl

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Rsdpfx Asxk U Dcsf Sol Motor speed: 2,885 rpm Weight: 595 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO MODEL: ZT18 Rjdpfx Afsxxb Evs Sol SERIAL NO.: AII702327 YEAR: 2003 POWER (kW): 18.5 CAPACITY (m3/min): 2.51 PRESSURE (bar): 8.6

Condition: new, Compressor screw Manufacturer: Atlas Copco Rodpfx Asvi Hbhef Sol Suitable for the following models: GA90, GA110, GA132, GA160, GA180VSD, GA200, GA250 Lightweight Price per piece

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Rjdpfx Ajxk U Alef Sel Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 1998, Screw compressor Manufacturer: Atlas Copco Type: ZR 55 Year of construction: 1998 Power: 53 kW Pressure max. 7.5 bar Redpfovi Ht Dox Af Sol

Condition: good (used), Year of construction: 1995, Screw compressor Rodpfx Aovi Hplsf Sjl Manufacturer: Atlas Copco Type: XRHS 385 Year of manufacture: 1995 Operating hours: approx. 12,865 h Delivery pressure: 20 bar Output: 224 kW Engine: OM441LA Weight: 5.8 tons