Used Atlas Ar86 E for sale (434)

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 2x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Dodpfxjulkvdj Apiecp

Condition: excellent (used), Year of construction: 2018, operating hours: 513 h, functionality: fully functional, overall weight: 649 kg, power: 33 kW (44.87 HP), fuel type: diesel, Atlas Copco XAHS 38/XAS88/Compressor/Construction Compressor/12 Bar • Manufacturer: Atlas • Model: Copco XAHS 38/XAS88 • Year of manufacture: 2018 • Operating hours: 513 hours • Power: 33 kW/44 hp • Engine: Kubota 4-cylinder diesel engine • 12 bar • Transport length: 1.94 m • Transport width: 1.16 m • Transport height: 1.05 m • Total weight: 649 kg • German machine • Immediately ready for operation Dcsdpez A Dq Tjfx Apiep • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. Dsdjz Spa Njpfx Apiocp The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, Year of construction: 2011, operating hours: 10,747 h, Equipment: ABS, ATLAS 230 MH Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? BETRIEBSSTD. 10 747 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Dcedpfx Apeycbbyeiop * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, functionality: fully functional, power: 39 kW (53.03 HP), fuel type: diesel, color: beige, overall weight: 5,500 kg, operation weight: 4,500 kg, Year of construction: 2001, operating hours: 11,500 h, Equipment: cabin, hydraulics, pallet forks, standard shovel, Atlas AR55 wheel loader Year of manufacture: 2001 Dcodpfez E Ri Isx Apisp 11,500 hours 4,500 kg 39 kW Deutz engine Approx. 5,500 kg Fork + bucket + quick coupler Additional control circuit

Condition: used, Year of construction: 2023,

Condition: used, functionality: fully functional, Year of construction: 2011, The Atlas Copco Boomer E2 C (now part of the Epiroc lineup) is a high-performance, two-boom hydraulic face drilling rig designed for underground mining and tunneling Dcedpfx Apo Aay R Roiop

Condition: used, Year of construction: 2023, ---- Data: - Braked chassis, with air brake system (AB) - DIN standard compliant - Bevel gear - LED road lighting system Dcsdpsz Sw Thofx Apisp - Passenger car clutch - Aftercooler + bypass - Toolbox - Tool oiler with aftercooler - O2 homologation - Fleetlink Smartbox Box2.2 AC Operating pressure: 7 to 10.3 bar Volume flow: 5.0 to 3.6 m3/min Engine: Kubota / V1505-CR-T Power: 33.0 kW

Condition: used, Year of construction: 2023,

Condition: used, mileage: 1,001 km, power: 65 kW (88.38 HP), gearing type: automatic, fuel type: diesel, color: orange, overall weight: 7,400 kg, empty load weight: 6,700 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2006, Year of construction: 2006, operating hours: 7,975 h, front tire size: 405/70-24, rear tire size: 405/70-24, driver cabin: other, wheelbase: 2,270 mm, Equipment: additional headlights, all wheel drive, standard shovel, Vehicle location: Bovenden, rear window, working lights Wheelbase: 2270 mm Deutz diesel engine type 5F4L 2011, loading length approx. 5700mm! Height 3850mm Approx. 7,975 operating hours! Various accessories (high tip bucket, pallet fork, bucket separator) available at extra charge! MB-HDS 214 bucket separator for 8.900,- EUR surcharge, see -8578-! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dcodpfsvhiq Asx Apiop

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ATLAS COPCO XAHS408 STAGE5 mobile compressor with an aftercooler, fully serviced. The machine comes with documentation for registration. Technical data: Dcjdpfx Ae Ad E Hxopiep capacity: 24.0 m3/min; working pressure: 12 Bar; year of manufacture: 2020; engine: CUMMINS 187KW; operating hours: 971h; The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 245,000 PLN Gross price: 301,350 PLN The machine is in excellent condition. Links to videos are provided below.

Condition: used, Year of construction: 2016, 2016 | Atlas Copco XATS 900E | Used Air Compressor 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 10 inspection points 9 approved ✅ 0 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Mallfunction in display no power to dash mallfunction , Will be fixed later by putting new dashboard , operations are not tested during inspection , machine looks clean and Well kept 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40513 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Dcjdpfx Apjy Aznzsiep 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Dedpfezvllnsx Apiecp Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384

Condition: used, Year of construction: 2025,

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Dsdoulayxspfx Apijcp Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 454, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. Djdpfjulaxzsx Apiecp We offer this used control unit together with the matching ETP ST32-10-I06 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: ETP ST32-10-I06, year of manufacture: 2022 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: used, Year of construction: 2022,

Condition: used, Year of construction: 2023,

Year of construction: 2021, operating hours: 1,690 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3956748, Atlas Copco Boommer L2D, 2021 model. Dcodpfx As Agpitjpisp

Condition: used, Year of construction: 2024, ---- includes aftercooler and water separator! Djdo Acd Irspfx Apijcp UVV certificate – new, valid until 09/2027.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R rock drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Equipment: Construction compressor Atlas Copco MCT, Type XAS 58-7 G, with integrated generator 6kVA, socket: 2 x 360V / 1 x 230V. Unbraked chassis, adjustable in height, initial oil fill, crane eye, closed bottom tray, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO (German Road Traffic Licensing Regulations), operating permit. Accessories: Compressed air hammer Atlas Copco, Type TEX 10 PSKL, weight: 10.7 kg. Compressed air hammer TEX 230 PE, weight: 27 kg. Various pointed and flat chisels, asphalt chisel 115 mm wide, TERRA Hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories 28,000 € net. * New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Djdpfxsy Rv Ils Apijcp Organizing special transports We will gladly help you organize special transports. Short-term registration / export license plates We will gladly help you obtain export license plates/short-term registration. Handling customs formalities

Condition: used, Year of construction: 2024, ---- Demonstration unit Dcedpfxozkz Eas Apisp Equipment: Control panel 5-pin ELP B 32/16 A + DS sockets Socket set, type B 16 A socket Insulation monitoring relay Battery switch Operating manual, German

Condition: used, mileage: 1,001 km, first registration: 01/2003, empty load weight: 250 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2003, Equipment: crane, Vehicle location: Bovenden. Includes Kinshofer swivel head and upper mount! Dcsdpfjz Duvcex Apijp Bucket width approx. 500mm! Capacity approx. 150 liters. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: good (used), Year of construction: 2002, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2520, We have more fishmeal equipment for sale. Atlas Stord tp RS-80DC Order no. 200059 Max. input shaft torque 1900 Nm Djdpe Ahrdqsfx Apijcp Year 2002 Gear ratio 1:250 Press cake thickness 45 mm Motor 90 kW Asea tp 280M

Condition: good (used), operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, General information Year of manufacture: 1998 Field of application: Construction Drivetrain Drive: Wheel Dedpfx Apjygwfieijcp Weights Empty weight: 3.380 kg Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.