Used Atlas Ar65 for sale (442)

Condition: used, mileage: 1,001 km, first registration: 01/2007, fuel type: diesel, color: red, driver cabin: other, gearing type: other, Year of construction: 2007, Equipment: central locking, Vehicle location: Bovenden, emergency stop, gripper control, elevated platform, 2-point hydraulic stabilization, 1x hydraulic extension. Crane: 5.2m = 2100kg, 6.7m = 1600kg; a roll-off system can also be provided upon request for an additional charge. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale and errors. Ijdpfx Adoi Rn Svo Nsih

Condition: used, mileage: 1,001 km, first registration: 01/2007, empty load weight: 230 kg, color: blue, driver cabin: other, gearing type: other, Year of construction: 2007, Vehicle location: Bovenden. Iiodpfx Asi Rpmtjd Njh Equipment: Excavator grapple, shell width 600mm, nominal capacity approx. 350l. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Year of construction: 2016, condition: excellent (used), ATLAS COPCO XATS186 11,4m3 10,3BAR COMPRESOR 2016! Mobile compressor ATLAS COPCO XATS186 ST4 machine with aftercooler (air dryer) after full service!!! Technical data: capacity 11,40 m3/min; working pressure 10.3 Bar; year of production 2016; JOHN DEERE engine mileage 1582 h !!!!!; compressor fully operational,ready to work,warranty Iisdpfx Adjpitifj Noh net price: 128500 zł gross price: 158055 zł machine in perfect condition!!! Below is a link to the video , showing the work of the machine

Condition: used, mileage: 1,001 km, first registration: 01/1991, color: grey, driver cabin: other, gearing type: other, Year of construction: 1991, Vehicle location: Bovenden, container locking, rear support Superstructure: Hookable Atlas set-down device on Roland roll-off frame (built 1994) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Isdpfx Aop N Apaed Njih - .

Condition: used, ATLAS COPCO TYPE: ZR90 SCREW COMPRESSOR Iiedpfx Adouruf Ne Neh

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 7.2 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With desiccant dryer Iedpfx Aeukvvaed Njih 45 kW motor Capacity: 7.20 m3/min Pressure: 7.5 bar The compressor is in perfect working order.

Year of construction: 2023, condition: new, * Year of construction 2023 (new unit); * Primary power (PRP) 32 kVA / 26 kW; * Nominal standby power (ESP) 33 kVA / 26 kW; * Rated voltage 400V; * nominal frequency 50Hz; * with terminal strip (without sockets outside) Isdpjl Iyyuefx Ad Njih * dimensions: 2.225 x 970 x 1.185 mm (LxWxH) - weight, without fuel: 137 kg

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 oil-free scroll compressor The SF series utilizes scroll technology, which eliminates metallic contact between the compression elements, meaning that absolutely no oil is required in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compressor elements have recently been overhauled or replaced. Operating hours (total): 15,983 hours (the actual time the compressor has been running since 2001). Controller hours: 99,527 hours (the time the controller was energized). Operating times of the individual scroll elements (compressor stages): Operating hours, element 1: 735 hours Operating hours, element 2: 735 hours Operating hours, element 3: 736 hours Technical data: Manufacturer: Atlas Copco Model / Product type: SF 15 (Oil Free Air) Iedpfx Aszwmd Ued Noih Serial number: ATI 502157 Maximum operating pressure: 8 bar(e) Delivery rate (Free Air Delivery): 24.7 l/s Shaft rated power: 14.8 kW Shaft rated speed: 1500 rpm Total weight: 590 kg Year of construction: 2001 Controller: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS447 STAGE3 mobile compressor with final cooler, fully serviced. Technical data: capacity: 26.6 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: CAT C9.3 ACERT 242KW; operating hours: 4431h; The compressor is in perfect working order, ready for operation, with a warranty. Isdpfx Asz Rxu Rod Neih Net price: 187,000 PLN Gross price: 230,010 PLN The machine is in excellent condition. Links to videos are provided below.

Condition: used, Year of construction: 2013, Screw compressor Manufacturer: Atlas Copco Type: GX7FF EL – with integrated refrigerant dryer Year of manufacture: 2013 Operating hours: 3,437 Iodsz R Nuvopfx Ad Njih Working pressure: 12.75 bar Maximum pressure: 12.75 bar Power: 7.5 kW Refrigerant type: R 134 A Approximate weight: 314 kg Reference no.: ME2220

Condition: good (used), operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, General information Year of manufacture: 1998 Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 3.380 kg Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Iisdpfx Adsygwfie Njh Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: used, color: red, Year of construction: 1981 Operating hours: 4.391 Tank pressure: 11 bar Iijdsz S Dcpjpfx Ad Njh

Condition: used, color: other, Year of manufacture: 1995 Year of construction: 1995 Position axle 1: rear Compressor receiver volume: 2500 l Isdpjz S Atmefx Ad Noih

Condition: used, Year of construction: 2009, operating hours: 14,500 h, Atlas TW 140 Year of manufacture: 2009 14,500 operating hours Approx. 16 tons Iodpfx Aszdxynsd Noih 1 hydraulic grab German machine Visit our website as well: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/...?... Roman We will be happy to assist you with financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2,000 EUR Our services for you: - Customs registration - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, functionality: fully functional, power: 105 kW (142.76 HP), gearing type: hydrostat, fuel type: diesel, overall weight: 22,000 kg, operation weight: 21,500 kg, axle configuration: 4x4, number of seats: 1, Year of construction: 2017, operating hours: 9,557 h, machine/vehicle number: 201 M 301280, Equipment: all wheel drive, cabin, gripper hydraulics, hydraulics, Wheeled material handler Atlas 200 MH, used for scrap handling. Technical data (per nameplate): – Year of manufacture: 2017 (model year 2018) – Vehicle ID no.: 201 M 301280 – Engine: Deutz TCD 6.1 L6, 105 kW – Permissible total weight: 22,000 kg Ijdpfxoz I Iz Hj Ad Noih – Operating hours: 9,557 h Equipment: – Wheeled undercarriage with outriggers – Hydraulically elevating cab Operating weight per manufacturer approx. 20–21.5 t, reach approx. 10 m depending on equipment. Inspection and test run by appointment on site (Ligmet, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: used, Attachment suited for: Construction machines Iisdpfx Asz S Anwed Noh

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Iijdpfx Adjzzp N Ie Nsh Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: excellent (used), General information Year of manufacture: 2015 Field of application: Construction Weights Empty weight: 1.500 kg Functional Dimensions of cargo space: 200 x 70 x 80 cm Iijdpsy N Sdtsfx Ad Njh CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 19 - 32 t Remanufactured: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 170 l/min Strike count: 320-640 Latest inspection: 2026-04-27 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1700DP from 2015. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals, ContiLube and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: AII 265383, overall weight: 460 kg, power: 15 kW (20.39 HP), fuel type: electric, pressure (max.): 8.5 bar, Equipment: type plate available, We are offering this used Atlas Copco GA15 FF reciprocating compressor, manufactured in 2002. Manufacturer: Atlas Copco Model: GA15 FF Year of manufacture: 2002 Condition: used Operating hours cannot be read; the display has a minor defect (see image). Serial number: AII 265383 Iiodpfxoz Ilf Ae Ad Nsh Type: screw compressor Max. operating pressure: 8.5 bar Shaft speed: 3000 rpm Rated shaft power: 15 kW Effective delivery rate: 40.8 l/s If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Iisdpfxozzq Ews Ad Neh

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: API429763, overall weight: 490 kg, fuel type: electric, volume flow: 216 m³/h, pressure (max.): 13 bar, Atlas Copco GA18VSD screw compressor with variable speed drive for compressed air supply in workshops and industry. TECHNICAL DATA – AS PER NAMEPLATE Manufacturer: Atlas Copco Model: GA18VSD Year of manufacture: 2010 Motor power: 18.5 kW / 25 hp Maximum permissible operating pressure: 13 bar Volumetric flow rate Qv as per nameplate: 60 l/s / 3.6 m³/min Power connection: 400 V, 50 Hz, 3 phases Weight: 490 kg Serial number: API429763 EQUIPMENT AND CONDITION Frequency-controlled drive (VSD) and sound-dampening enclosure. Technical and visual condition according to available information: very good. Maintenance and service history available; last reported service: 24.01.2025. Current operating hours are not available. An integrated refrigeration dryer is not confirmed and is not offered as a guaranteed component. LOCATION AND INSPECTION Iijdjz Hck Hepfx Ad Njh 65618 Selters, Germany. Inspection and collection by arrangement. Coordinate the scope and procedure of loading before collection. Price: EUR 5,750 net, negotiable, plus statutory VAT. Reference: RQ449789FA

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Engine power: 231 kW Permissible total weight: 3500 kg Support load: 70 kg Axle load, axle 1: 1765 kg Iiodpfez A Daujx Ad Neh Axle load, axle 2: 1665 kg Serial number: APP889037 Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2002, operating hours: 31,326 h, functionality: fully functional, machine/vehicle number: AII265384, overall weight: 460 kg, power: 15 kW (20.39 HP), fuel type: electric, pressure (max.): 8.5 bar, Equipment: type plate available, We are offering this used Atlas Copco GA15 FF reciprocating compressor, manufactured in 2002. Manufacturer: Atlas Copco Model: GA15 FF Year of manufacture: 2002 Condition: used Serial number: AII 265384 Type: screw compressor Maximum operating pressure: 8.5 bar Shaft speed: 3000 rpm Rated shaft power: 15 kW Ijdpfx Adoz Ilfco Nsih Effective delivery rate: 40.8 l/s If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2011, operating hours: 8,261 h, Equipment: all wheel drive, Stock No. 5797 Atlas 160 W mobile excavator with additional hydraulics ----* Manufacturer: Atlas * Type: 160W - Mobile excavator * Year of manufacture: 2011 * Power-shift transmission * Color: Orange * Tires: 10.00 - / Twin tires * kW/HP: 105 kW / 143 HP * Deutz engine with 143 HP, water-cooled * 2-shell grab Isdpfx Aezwbf Tod Noih * Total operating hours recorded: approx. 8,261 hours * Hydraulic operating hours recorded: approx. 3,581 hours * Hydraulic connections for hammer and shears * 301-liter diesel tank * 180-liter hydraulic tank * 32-liter AdBlue tank * Air conditioning * Adjustable boom * 270-degree camera system * Rotating beacon * Max. km/h * Work lights * Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 315 kW (428.28 HP), pressure (max.): 10.4 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco ZT315VSDFF Inverter and dryer integrated Ijdpsz N Evxsfx Ad Neih Year of manufacture: 2014 Total operating hours/load hours: 32,354/32,056 h Maximum pressure: 10.4 bar Delivery rate: 22.3 – 44.6 m3/min