Used Valla 120 E for sale (74,974)

Condition: good (used), Machine vice, sturdy vice, drill press vice Dcjdpsb A Ntbefx Af Djc -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 155 mm -Clamping depth: max. 120 mm -Dimensions: 550/300/H160 mm -Weight: 38 kg Dcedpfx Aeb A Rafjf Dec

Condition: used, total length: 4,155 mm, Year of construction: 2025, load capacity: 12,000 kg, - Elektrokran: Emissionsfrei - 8 Stunden nun Stop arbeiten - große und bequeme Kabine - kompakt und wendig - Vorderachse Antrieb mit gegenläufiger Bewegung - Steuerung über die Hinterachse - Vorderradantrieb, N°2 Elektromotoren AC 8.5 kW 80V. Isolationsklasse H - Eigengewicht Kg. 12.300 - Batterie: 80 V - 840 Ah, 8 Arbeitsstunden - Reifen: Vorne n.4 superelastich 4x300-15”, Hinten n.2 superelastich 2x250-15” - hinterer Lenkwinkel -90°/+90 - Elektronische Lastbegrenzung - Betriebsbremse: hydraulisch über Fußpedal, Handbremse: hydraulisch über automatische Steuerung - Rahmen hergestellt aus hochfesten und verschweißten Qualitätsstahlplatten. - Auslegerwinkel +55°/-15° - Elektromotor 1x20 kW - 80 V AC, Isolationsklasse H Dedpex Ni Upjfx Af Dscc

Condition: used, functionality: fully functional, machine/vehicle number: 8701, Year of construction: 1999, operating hours: 2,117 h, load capacity: 1,250 kg, lifting height: 4,360 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, fork length: 1,250 mm, drive type: Elektro, High-lift order picker Chassis number: 8701 Load center: 600 Mast type: Duplex Dcsdox S Tciepfx Af Djc Condition: Ready for use and fully functional Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 48V Battery type: PzS

Condition: excellent (used), Year of construction: 2008, operating hours: 59,934 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 1.525 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,860 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503240 manufacturer: ENGEL type: Victory 650-120 tech controller: EC200 A02 year of construction: 2008 operation hours: 59934 h clamping force: 1200 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 507 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 1525 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A Dodpfx Afex Icxxe Docc mould heating 8x measures of machine l x w x h: 4.86m x 1.5m x 2.1m total weight: 7600KG

Condition: excellent (used), Year of construction: 2007, operating hours: 68,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,600 bar, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, warehouse no.: 503558 manufacturer: ENGEL type: Victory 330-120 Tech controller: CC100 year of construction: 2007 operation hours: 68000 h Dcedpfsx Icwzjx Af Dsc clamping force: 1200 kN size of mould plates h x v: 740 x 470 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar equipment included screen text german Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI41VC year of construction: 2007 measures of machine l x w x h: 5.1m x 1.5m x 2.1m total weight: 7300KG

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 192 cm³, injection pressure: 1,700 bar, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, warehouse no.: 503503 manufacturer: ENGEL type: insert 650H-120 controller: CC200 year of construction: 2012 operation hours: 10624 h clamping force: 1200 kN size of mould plates h x v: 710 x 400 mm min. mould height: 400 mm max. open daylight: 750 mm Dcsdpfx Ajx Ictief Djc opening stroke: 350 mm screw diameter: 35 mm swept volume: 192 ccm injection pressure: 1700 bar equipment included: screen text german screen text english air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts clamp unit vertikal interface for dosing unit mould heating 8x measures of machine l x w x h: 4.2m x 2m x 3.6m total weight: 12500KG

Condition: excellent (used), Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 289 cm³, injection pressure: 2.429 bar, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 735 mm, plate width: 780 mm, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, overall weight: 9,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 850 mm, Equipment: documentation/manual, warehouse no.: 503470 manufacturer: KRAUSS MAFFEI type: KM 120-380 EX controller: MC5 year of construction: 2008 operation hours: 10113 h clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 850 mm opening stroke: 400 mm screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included: screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG Djdex Icqzjpfx Af Decc

Condition: ready for operation (used), Fanuc servo motor (type unknown) with EMETA 120 encoder, length overall: 350 mm, Ø housing: 100 mm, hole spacing of mounting holes: 53 x 53 mm (118 x 70 mm), Ø drive shaft: 17 mm, used, type designation unknown, strong traces of use, 100% functional Djdoi D H Sfjpfx Af Docc

Condition: ready for operation (used), easyLINE 2-axis-system X-axis: 140 mm Y-axis: 120 mm , with connection cables, used, small traces of use, 100% functional Dcodsi D Uqlopfx Af Dec

Condition: new, Siemens 6SL3120-1TE21-8AD0 Single Motor Module 18A SN: T-PN6273025 FS: E ,unused, in sealed original packaging, 100% functional, scope of delivery as per photos Djdpfsxag T Isx Af Dscc

Condition: ready for operation (used), Siemens 6FC5012-0CA01-0AA0 Interface E Stand C , used, normal signs of wear, 100% functional, scope of delivery according to photos Djdji Edxnjpfx Af Dscc

Condition: ready for operation (used), Siemens 6FC5112-0CA01-0AA0 Sinumerik Interface Module E Stand C used 100 % functional Dcedpfx Afsi Edyhs Djc

Condition: ready for operation (used), Heidenhain ERN 120 5000 01-03 rotary encoder .: 589 611-3C , serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Djdei Eah Hspfx Af Decc

Condition: ready for operation (used), Siemens 6FC5112-0EA03-0AA0 SINUMERIK 840C/840CE 4 active serial interface CP 315/CP 373 without system software + Siemens 570 373 9001.01 E-Stand: F/B SN:R801263, used, normal signs of use, 100% functional, scope of delivery as per photos Dcedpfx Afolu Riwj Dsc

Condition: new, Year of construction: 2026, The ERBA Turbo 120 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine is equipped with a digital process timer, a digital speed display, and a dosing pump (wet version). The plate rotation speed can be adjusted via frequency converter. The machine also features a tilting motor for unloading. The Turbo 120 is available in both dry and wet configurations. Technical data: - Gross volume: 130 L - Drive power: 4.0 kW - Plate speed: 80 to 170 rpm - Optionally available with sound insulation cover, separation deck, or separation box Dedpfox Aq E Tjx Af Djcc As an experienced partner, we provide expertise in all aspects of mass finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to your enquiry. We are happy to provide you with advice free of charge and without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This listing serves only as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions with imprint and information on the right of withdrawal, before any purchase or contract is concluded.

Condition: used, mileage: 180,000 km, power: 154 kW (209.38 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,460 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,320 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, Year of manufacture: 2019 Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Suspension: air suspension Empty weight: 7.201 kg Carrying capacity: 4.789 kg GVW: 11.990 kg Dcjdpfx Afox Swkwe Dec Tail lift: Dhollandia, tail lift, 750 kg Cool unit make: Carrier Cool unit brand: Carrier

Condition: used, machine/vehicle number: 14745, Year of construction: 2015, operating hours: 5,855 h, load capacity: 1,200 kg, lifting height: 750 mm, free lift: 750 mm, load center: 600 mm, construction height: 1,300 mm, fork length: 1,150 mm, enginetype: Electric, manufacturer: Jungheinrich Dcodpfx Aox Tlz Tof Djc

Condition: used, machine/vehicle number: 6565437, Year of construction: 2018, operating hours: 1,529 h, lifting height: 4,500 mm, fuel type: electric, battery capacity: 225 Ah, battery voltage: 24 V, Empty weight: 1.090 kg Lifting capacity: 1.200 kg Maximum passing height: 212 cm Supply voltage: 24 V Remanufactured: Yes Dedpfx Asray Tlef Djcc Transport dimensions (LxWxH): 2,05x0,77x2,12 Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6517094, Year of construction: 2017, operating hours: 2,233 h, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, battery manufacturer: BT Exide, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,200 mm, Empty weight: 1.390 kg Lifting capacity: 1.200 kg Maximum passing height: 225 cm Dcodpfx Afeu Thr Ne Dsc Supply voltage: 24 V Reconditioned: Yes Remanufactured: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan A.Rad Transport dimensions (LxWxH): 2,24x0,795x2,25 Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6549410, Year of construction: 2018, operating hours: 3,618 h, lifting height: 3,950 mm, fuel type: electric, mast type: triplex, battery capacity: 375 Ah, fork length: 1,200 mm, Empty weight: 1.389 kg Dcsdsu Tbgzspfx Af Doc Lifting capacity: 1.200 kg Maximum passing height: 194 cm Supply voltage: 24 V Reconditioned: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan Transport dimensions (LxWxH): 2,23x0,785x1,94 Please contact Karl Leitner for more information

Condition: used, functionality: fully functional, machine/vehicle number: 91654458, Year of construction: 2021, operating hours: 1,144 h, load capacity: 2,000 kg, lifting height: 170 mm, fuel type: electric, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 878 kg, Jungheinrich ESE 120 Pallet truck, year of manufacture 2021 Details: Jungheinrich ESE 120 Year of manufacture: 2021 Work hours (h): 1144 Lift height (mm): 170 Lift capacity (kg): 2000 Fork length (mm): 1150 Weight (kg): 878 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2021 Battery capacity (Ah): 375 Battery voltage (V): 24 Djdpfxsx Sx H Ho Af Decc Accessories: Power steering.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale Djdpjwtft Nsfx Af Docc PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91627336, Year of construction: 2018, operating hours: 2,006 h, load capacity: 2,000 kg, lifting height: 1,960 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,440 mm, battery capacity: 500 Ah, battery voltage: 24 V, fork length: 1,190 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 1,350 kg, Jungheinrich ESD 120 Pallet stacker, year of manufacture 2018 with a Standard mast & initial lift Details: Jungheinrich ESD 120 Dcsdpfxjx Sq S Uj Af Djc Year of manufacture: 2018 Work hours (h): 2006 Mast type: Standard Lift height (mm): 1960 Freelift (mm): 0 Build height (mm): 1440 Initial lift: Yes Lift capacity (kg): 1000 / 2000 Fork length (mm): 1190 Weight (kg): 1350 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2018 Battery capacity (Ah): 500 Battery voltage (V): 24 Accessories: Power steering.

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal shears with stop and stable base -Cutting insert length: approx. 160 mm -Lever arm: with rack and pinion transmission -Lift-down device: infinitely adjustable Dcsdeibw Dxepfx Af Dsc -Overall dimensions: 1000/780/H1870 mm -Transport dimensions: 1000/780/H1300 mm -Weight: 100 kg