Used Hurlimann H-496 for sale (56,993)

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor Kwsdpfsdzc Rfox Aaxet 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Maximum wall panel height 3500mm One man operation Weight of unit 80kgs Kodpfjfqmtksx Aaxewt

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables Kwodspahmhopfx Aaxet

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Kodpfxjb Tmrve Aaxowt Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Kwjdpfx Asn Up R Ioaxst 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Kodpfx Asxqr E Djaxowt

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Kedpfexqr D Tsx Aaxswt

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic Kwedpoxpfuiofx Aaxet What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 pieces of horizontal, axially split volute casing pumps in process design, with single-suction, single-stage radial impeller Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm The nameplate shows the latest operating parameters, NOT the pump’s best efficiency point! Best efficiency point according to pump curve: Flow rate: 14.5 m³/hour Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Operating point according to last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 Volts Speed: 1440 rpm The material 1.4593 Noridur is highly suitable for: - Chemical and process industries Kwedpfexp Eqkjx Aaxjt - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process waters - Wastewater treatment plants/sewage treatment - Offshore and marine engineering

Condition: new, functionality: fully functional, Year of construction: 2023, LOT OF NEW SAFETY VALVES 4 x 511ARN DN25 PN40 / DN40 PN16 4 x 571ARN DN25 PN40 / DN40 PN16 A216WCC WITH VALVES 1 x 571ARN DN32 PN40 / DN32 PN16 A216WCC WITH VALVES Kedow Eph Ujpfx Aaxewt 1 x 110ARN40 DN40 PN40 / DN65 PN16 A216WCC 1 x 120ARNH100 DN100 PN40 / DN150 PN16 A216WCC 1 x 511IRN DN25 PN40 / DN32 PN16 CF8M 1 x LOW PRESSURE REDUCER LPRI-025D-04-N20-SKA-L-A2

Condition: new, functionality: fully functional, Year of construction: 2023, SET OF 2 NEW STAINLESS STEEL SAFETY VALVES, NEVER INSTALLED. DN250 / DN150 PN16 Kwjdpew Dvz Ssfx Aaxst

Condition: used, Year of construction: 1975, turning diameter over bed 430 mm turning diameter over slide rest 340 mm turning length 1500 mm turning speeds 19 -2000 U/min centre height 215 mm spindle bore 56 mm total power requirement 5,5 KW Kodpewu Hi Isfx Aaxewt weight of the machine ca. 2,3 t dimensions of the machine ca. 3,65 x 1,4 x 1,7 m Center lathe - Digital display - Forkardt 3-jaw chuck F 250 - IDEAL quick-change tool post - Live center - Coolant system - Emergency stop device

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Ksdpfx Ajw Ry U Ioaxswt

Condition: used, Year of construction: 2006, Description Brand: H&M Kwedpfx Aowzkyqsaxet Type: HM-Z/4 F Year of manufacture: 2006 Feed length: 8500 mm Industrial PC. Saw blade diameter: 700 mm Angle adjustment: 0-180º Tilting angle: 0-45º Z-axis adjustment: 200 mm Maximum cutting height: 250 mm Discharge system with pushers

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Kjdpfx Aaot Ngfisxjwt

Condition: excellent (used), functionality: fully functional, Automatic machine for filling and sealing bags with liquid. Originally designed for aseptic filling and sealing of infusion bags. Five-nozzle filling machine. Process description: 1st station – Manual placement of the bag into the starwheel 2nd station – Cutting open the filling port; the cut-off piece is removed by vacuum into a separate container 3rd station – Start of filling 4th station – Continued filling 5th station – Continued filling 6th station – Continued filling Kwedpfjw Ac Ebox Aaxst 7th station – Finalise filling 8th station – Sealing of the filling port 9th station – Ejection of the filled bag Filling is performed using overpressure through a central feed pipe. Each filling station is equipped with SIRAI valves that close a silicone filling tube (no moving parts in contact with the liquid, which facilitates cleaning and validation). Each individual filling station can be set on the control panel via timer (millisecond accuracy). Filling volume is adjustable from 100 to 3000 ml. The machine is constructed entirely from stainless steel 316, suitable for pharmaceutical production, and is mobile, mounted on wheels. The equipment is technically simple, easy to maintain, and highly compact (footprint less than 1 square metre).

Year of construction: 1992, condition: good (used), H Bret press Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Kodpjiuc Nwjfx Aaxjwt Turn over to pressbrake possible!

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Kwedpfx Aajxfvrwsxet Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: excellent (used), Standard boiler 30 t/h. Year of manufacture: 2012. Equipped with two oil burners. Kedpsxgn Itefx Aaxewt

Condition: used, Year of construction: 1994, Pneumatic pallet lifter. Kwjdjua Auaepfx Aaxjt Automatic lifting and lowering up to 1000 kg IMMEDIATELY AVAILABLE

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm Kwedpfxow A H T Ao Aaxjt V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Openwork Stackable approx. 260 pieces available for further questions please contact me Kjdogh Hu Uopfx Aaxowt

Year of construction: 2005, condition: reconditioned (used), SCREW COMPACTORS Ksdpsgypgajfx Aaxewt Screw compactors are designed to dispose of large quantities of material. Even bulky materials can be compacted effectively. Steady rotation of the auger shaft draws the material to be compacted into the high-performance compactor. Compaction takes place in the adjacent container. Compared to piston presses, up to 60% higher content weights of the containers can be expected here. used functional machines Price from 3.300 € according to condition, VAT excluded. Delivery possible

Year of construction: 2005, condition: good (used), several used control cabinets H&G screw compressors. Functional H&G switch cabinets Kedogyty Tjpfx Aaxswt Height: 60 cm width: 38 cm Depth: 21 cm The mentioned sales price is plus 19 % VAT, ex yard.

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Kwedpfem Uc R Uox Aaxot Engine: 160 kW