Used Hurlimann H-468 for sale (55,681)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 9,790 h, load capacity: 3,500 kg, lifting height: 4,805 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 5,335 kg, total length: 2,950 mm, drive type: Treibgas, construction width: 1,250 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Bjdez Hntgopfx Aa Teln Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 40 - 60% Battery year of manufacture: 2015 Dual auxiliary hydraulics, integrated side shifter, fork positioner (420-1330mm), half cabin, single-pedal operation, single-lever operation, 2 front work lights, 1 rear work light

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 17,799 h, load capacity: 2,500 kg, lifting height: 5,310 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,330 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 3,915 kg, total length: 2,650 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Bodoz H E Iuepfx Aa Tsln Front tire type: Superelastic Front tire size: 2 x 225/75-10 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 225/75-10 Rear tire condition: 20 - 40% Battery year of manufacture: 2016 Additional single hydraulic circuit, fully enclosed cab with heater, full free lift, 2 front work lights, 1 rear work light.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 10,217 h, load capacity: 4,500 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: simplex, construction height: 3,070 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, empty load weight: 6,440 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 300-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 20 - 40% Bjdpfx Aasz H E Rij Tsln Battery year of manufacture: 2015 Double auxiliary hydraulics, integrated side shifter, single-pedal operation, dust protection, blue spot, 2 front work lights, 1 rear work light.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,772 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,470 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, fork carriage width: 1,080 mm, fork length: 1,200 mm, empty load weight: 3,940 kg, total length: 2,650 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x9-10 Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2018 Bsdpfxez H E R Ns Aa Tjln Double auxiliary hydraulics, integrated side shifter, full cabin, 2x work lights at the front, 2x work lights at the rear.

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Bledpez Hnzksfx Aa Tjn Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides Blodpfofgyifjx Aa Tjn “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Bjdpjfgyigofx Aa Teln Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Blsdpfx Aajupw Uzo Ten Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: used, Year of construction: 2011, operating hours: 4,745 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fuel type: gas, construction height: 2,960 mm, gearing type: automatic, Equipment: air conditioning, cabin, lighting, pallet forks, sideshift, trailer coupling, Linde H 35 T - Series 393 - Full Service Forklift - Ex Rental Unit Made in Germany. Good condition, technically sound, and ready for use. The operating hours have been recorded and checked. The forklift is delivered with a gas cylinder. A new accident prevention inspection is available upon request. 4,745 operating hours Full cab - raised - Comfortable driver's seat Exterior mirrors Heating Air conditioning 2-pedal operation 4 front work lights 2 rear work lights Standard mast Cross lever joystick operation Lift height: 4,450 mm Overall height: 2,960 mm Free lift: 150 mm Integrated sideshift Forks 1,200 x 125 x 45 mm - N E W - Forks - other lengths possible from 1,200 mm - Bljdpfx Aowlg Dgja Tsn 3rd + 4th valve / dual auxiliary hydraulics SE tires Front tires 80% Rear tires 100% - N E W - Technical specifications - Errors excepted. Sale without warranty.

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Bodpoz H H R Refx Aa Tjln

Condition: used, Year of construction: 2000, functionality: fully functional, power: 14 kW (19.03 HP), cutting width (max.): 3,800 mm, Equipment: CE marking, Giben Prismatic 2 SP H.100, year 2000 for sale! Bljdpfx Asz H H U Nja Tjn Working width 3800 mm Number of grippers 6 Saw blade projection 100 mm Installed power: 14 kW

Condition: ready for operation (used), Year of construction: 1995, Technical data HERMLE UWF 1202 H Travel in X-axis: 850 mm Travel in Y-axis: 630 mm Travel in Z-axis: 500 mm Table size: approx. 1,200 × 550/560 mm Max. table load: 700 kg Spindle mount: SK 40, DIN 69871 Blsdpfx Aoz H Azroa Tjn Spindle speed: 20–5,000 rpm Spindle power: approx. 11.5 kW Tool changer: HTC, 34 positions Control system: Heidenhain TNC 426 Total power consumption: 22 kW/kVA Weight: 6,800 kg

Condition: used, mileage: 601,730 km, power: 157 kW (213.46 HP), first registration: 10/1989, fuel type: diesel, number of seats: 2, gearing type: automatic, axle configuration: 4x2, empty load weight: 12,320 kg, maximum load weight: 5,280 kg, overall weight: 17,600 kg, color: blue, wheelbase: 6,000 mm, driver cabin: other, Equipment: ABS, bathroom, cabin, parking heater, power assisted steering, seat heater, * German vehicle * Ideal basis for motorhome conversion * The vehicle is completely insulated and equipped with 6 insulated roof windows * Furthermore, a diesel auxiliary heater with 60 liter additional tank is installed * Toilet room with WC and washbasin available * Large fresh water tank and waste water tank * Electric water pump * 220-280 volt electrical converter * Power sockets * Interior lighting throughout * Flat floor * Various shelves, counters and drawers * 2 x bench seat * ISRI driver's comfort seat with air suspension * Seat heating * Sunblind for windshield * 6 x roof windows with sunblind * Loudspeaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6 cylinder in-line engine OM 447h * Max. gross vehicle weight: 17,600 kg Bedpfxovhpwvo Aa Teln * Unladen weight: 12,320 kg * When selling to tradesmen and for export (non-EU and EU), the German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 601,730 km, power: 157 kW (213.46 HP), first registration: 10/1989, fuel type: diesel, empty load weight: 12,320 kg, maximum load weight: 5,280 kg, overall weight: 17,600 kg, axle configuration: 4x2, wheelbase: 6,000 mm, brakes: other, color: blue, driver cabin: other, gearing type: automatic, emission class: none, number of seats: 2, Equipment: ABS, bathroom, cabin, parking heater, power assisted steering, seat heater, * German vehicle * Ideal basis for conversion into a sales or trade fair bus * Suitable for all sales purposes, e.g. food, tools, clothing, etc. * Shelving systems on the right and left * Various shelves, counters and drawers * Interior lighting throughout * The vehicle is fully insulated and equipped with 6 insulated roof windows * Furthermore, a diesel auxiliary heater with 60 liter additional tank is installed * Toilet room with WC and washbasin available * Large fresh water tank and waste water tank * Electric water pump * 220-280 volt electrical converter * Power sockets * Flat floor * 2 x bench seat * ISRI driver's comfort seat with air suspension * Seat heating * Sunblind for windshield * 6 x roof windows with sunblind * Loudspeaker system with microphone Blodpfovhpw Nox Aa Ton * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6 cylinder in-line engine OM 447h * Max. gross vehicle weight: 17,600 kg * Unladen weight: 12,320 kg * When selling to tradesmen and for export (non-EU and EU), the German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 8,158 h, load capacity: 5,000 kg, lifting height: 4,130 mm, free lift: 2,111 mm, fuel type: diesel, mast type: duplex, construction height: 2,890 mm, fork length: 1,300 mm, drive type: Diesel, Diesel forklift Blodpfxjzcrz Ds Aa Ten Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Side shifter, integrated 3rd valve

Condition: used, Year of construction: 2005, Machine: ALOWAG Pump 25.000 l/h Bedpfjz Icvxjx Aa Toln

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,564 h, load capacity: 1,200 kg, lifting height: 6,500 mm, free lift: 2,140 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Vulkollan Front tire condition: 80 - 100% Rear tire type: Vulkollan Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 620Ah Battery manufacturer: refurbished and tested battery Battery type: PzS Battery year of manufacture: 2019 Description: Refurbished, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, Mast side shift Rotating beacon, Bsdpfow N Trkox Aa Tsln Lifting height indicator, 360° steering

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! Bledpfx Asz H Nanja Ton HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty storage solution for industrial warehousing needs. The modular high-bay racking is ideally suited for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 18.50 m - Load capacity per level: 2,000 kg - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted Blsdpfsz H Nazjx Aa Ton - Levels: ground + 5 beam levels - Pallet spaces: 120 including ground spaces - Condition: used, Jungheinrich MPB SCOPE OF DELIVERY: - 6 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 50 × Beams, approx. 360 × 12 × 5 cm - 100 × Locking pins PRICE: €2,950.00 net €3,510.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional installation and dismantling by trained teams optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly create a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! Here, you can get a comprehensive overview of our pallet racking, shelving systems, and other solutions. Many systems are set up and can be experienced directly. Our expert consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 3.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 3.06 linear meters Shelving unit offer 1.06 linear meters, consisting of: Bjdpjz H Nk Tjfx Aa Teln - 04 x uprights approx. 200 x 40 cm, pre-assembled - 18 x shelves approx. 100 x 40 cm - 72 x shelf supports - 03 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir galvanized - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €253.00 net plus legally applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your requirements... We will be happy to help you with the implementation of your projects, from planning to ordering and assembly. Are you interested or do you have any questions? Simply contact us by message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Shelving offer of 30.06 linear meters consisting of: - 031 x uprights approx. 200 x 40 cm, pre-assembled - 180 x shelves approx. 100 x 40 cm - 720 x shelf supports - 030 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir zinc-plated - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2179.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Bedpoz H Nlqjfx Aa Tsln Our recommendation: Please let us know your requirements… We will be happy to help you with the implementation of your projects, from planning and ordering to assembly. Are you interested or have any questions? Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2019, operating hours: 6,983 h, lifting height: 4,950 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 1,200 mm, General information Year of manufacture: 2019 Weights Empty weight: 6.980 kg Bsdpsz H Uvuofx Aa Tsln Functional Lifting capacity: 4.000 kg Maximum passing height: 322 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids - Roof window = More information = Make of engine: kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 8,833 h, load capacity: 8,000 kg, lifting height: 5,455 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 3,210 mm, fork carriage width: 2,180 mm, empty load weight: 15,150 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,270 mm, Diesel forklift Blodpsz Hnw Sjfx Aa Tsn Load center: 1100 ISO class: FEM 4 A Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 4 x 315/70-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 315/70-15 Rear tire condition: 0 - 20% Battery year of manufacture: 2013 Double auxiliary hydraulics, cabin with heater, dust protection, single-pedal operation, single-lever operation, blue spot, 2 front work lights, 2 rear work lights.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 15,523 h, load capacity: 3,500 kg, lifting height: 5,150 mm, fuel type: gas, mast type: simplex, construction height: 3,310 mm, fork carriage width: 1,120 mm, fork length: 1,150 mm, empty load weight: 5,910 kg, total length: 3,000 mm, drive type: Treibgas, construction width: 1,300 mm, Internal combustion engine forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Bedpfx Aez Ifv Isa Tsln Front tire type: Superelastic Front tire size: 2 x 28x12.5-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2020 Double auxiliary hydraulics, cabin with heater and air conditioning, gas tank, blue spot, 6 front work lights, 1 rear work light.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Bsdpfxox Dlgnj Aa Tsln Z-axis: 650 mm C-axis: 0.001° All axes have linear drives Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.