Used Valtra/Valmet 6300 for sale (432)

Condition: ready for operation (used), General Location: Outdoor storage Condition: Used Container volume: 16,300 liters Vacuum: 1.0 bar Max. overpressure: 0.50 bar Max. permissible operating temperature: 50 °C Design: Horizontal, Floor-standing, Saddle-shaped Bslrhpev Rzhljqwswl Technical data/dimensions: Inner diameter: 1,800 mm Outer diameter: 2,000 mm Cylindrical length: 6,000 mm Equipment: Technical documentation: Drawing, available, Nameplate, Equipment: Crane eyes, Outlet: Available, Outlet: 100 mm Material: Material in contact with the product: V2A 1.4301 (AISI304)

Condition: good (used), Year of construction: 2017, operating hours: 4,252 h, lifting height: 6,300 mm, fuel type: electric, mast type: triplex, construction height: 2,650 mm, mileage: 4,252 km, lifting capacity: 1,600 kg, net weight: 1,800 kg, MULTIPLE IN STOCK This electric TRIPLEX stacker from the ATLET brand comes from 2017 and is in good condition;The stacker has a capacity of 1,600 kg;Lifts to a height of 6,300 mm;The drive-through height is 2,650 mm;4,252 hours on the counter;The battery is equipped with an external charger;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube Bslrhpqovtnrvewewl

Condition: good (used), Year of construction: 2017, operating hours: 2,960 h, lifting height: 6,300 mm, fuel type: electric, mast type: triplex, construction height: 2,650 mm, mileage: 2,960 km, lifting capacity: 1,600 kg, EXPECT PHOTOS AND VIDEO TO FOLLOW This electric TRIPLEX stacker from the ATLET brand is from 2017 and is in good condition;The stacker has a capacity of 1,600 kg;Lifts to a height of 6,300 mm;The drive-through height is 2,650 mm;2,960 hours on the counter;The battery is equipped with an external charger;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube Bwelrhpsvtnrcsqwsl

Condition: good (used), Year of construction: 2017, operating hours: 3,146 h, lifting height: 6,300 mm, fuel type: electric, mast type: triplex, construction height: 2,650 mm, mileage: 3,146 km, lifting capacity: 1,600 kg, EXPECT PHOTOS AND VIDEO TO FOLLOW Bwjlrhsvtnq Sepqwel This electric TRIPLEX stacker from the ATLET brand is from 2017 and is in good condition;The stacker has a capacity of 1,600 kg;Lifts to a height of 6,300 mm;The drive-through height is 2,650 mm;3,146 hours on the counter;The battery is equipped with an external charger;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube

Condition: good (used), Year of construction: 2017, operating hours: 3,159 h, lifting height: 6,300 mm, fuel type: electric, mast type: triplex, construction height: 2,650 mm, mileage: 3,159 km, lifting capacity: 1,600 kg, net weight: 1,800 kg, This electric TRIPLEX standing stacker from the ATLET brand comes from 2017 and is in good condition;The stacker has a capacity of 1,600 kg;Lifts to a height of 6,300 mm;The drive-through height is 2,650 mm;3,159 hours on the counter;The battery is equipped with an external charger;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube Bolrhpevn R Snjqwewl

Condition: good (used), Year of construction: 2009, Traverses X Y Z: 6300 x 1200 x 2000mm, Table 7000 x 1200mm, B axis 360 degrees via 1 degree increments, A axis -/+ 45 degrees via 2.5 degree increments, Bjlewga Rpsrhpqwewl Heidenhain iTNC530, ISO 50 spindle taper, 15,000rpm Spindle Speed, 30 station toolchanger, high pressure through spindle coolant, Interlocked guards, swarf conveyor. New spindle fitted 2025.

Condition: used, mileage: 1,042,000 km, Year of construction: 2015, Serial number: YS2P4X2000536xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19621 Truck specifications: - 2015 model - Km: approx. 1,042,000 - Transmission: Automatic - Tires (see pictures) - Space for 8 cars in total with trailer - Superconstruction: Kassbohrer Metago - Euro 6 Bwelsvygcmorhpqwol - Length: 982 cm - Width: 255 cm - Wheelbase: 438/110 cm - Weight: 13,990 kg - 450 hp - Bed - Refrigerator - Radio/CD - Air conditioning/ac Specifications trailer: - 2005 model - Superconstruction: Kassbohrer Metago - 2 axles - Length: 1,040 cm - Width: 255 cm - Wheelbase: 120 cm - Net weight: 6300 kg Description: Scania P450 car carrier from 2015 sold with 2005 Kassbohrer trailer. There is a total of space for 8 cars. The clutch and turbo on the truck have been replaced. Wheel bearings and brakes were replaced on the trailer in 2024. Can be delivered within a short time. Watch video. Km: 1042000 HK: 450 Technical approved: no EU-approved until: 13.03.2025 Own weight: 13990 Total Weight: 24000 Payload: 9935 Width: 255 Length: 982 Euro: 6 Gearbox: Automatic

Condition: excellent (used), Year of construction: 1980, Used Striebig panel saw Model Standard 6220 Year of manufacture: 1980 Cutting length: 5300 mm Cutting height: 2200 mm Cutting thickness: Max. 80 mm Motor power: 4.4 kW Speed: 4750 rpm Blade diameter: 300 mm Machine length: 6300 mm Machine width: 1257 mm Bwslrswhglvjhpqwel Machine height: 2860 mm Location: In stock, 54634 Bitburg - Available upon request -

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill table-size 1.100 x 560 mm max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwolrswhf Ngshpqwel Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), DECKEL High-Speed Milling Head No. 2021-2230 / FP 4 - 0199 This high-speed milling head is suitable for a DECKEL FP 1 / 2 / 3 / 4. When used on an FP 1, an intermediate plate is required. Spindle mount SK 40 Bwslrhpqowg Rybjwel Spindle speed range 40 - 2000 + 125 - 6300 rpm. Quill adjustment Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (Option: 3500) wing assembly table ----- Manufacturer description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash assembly table, for sashes up to a maximum height of 2500 mm with RU-SH, special screwdriver length 3000 mm, Width 1400 mm, inclination of the working platform manually adjustable. Usable width 2500mm Holder for fitting scissors or fitting punch. Pack of 10 swivel commuters for hanging the Wings, completely pneumatically foldable unhindered movement of the wings on the table surface. Device for sensing the length of the sash fittings for constant and variable/central handle position and any handle seat height for pre-drilled ones Wings, color dimension recognition for the fittings. Commuter height can be adjusted to either 50 or 60 mm at a stop. RU-SH, special screwdriver with pneumatic Depth switch mounted on carriage, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container Manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail depth can be manually adjusted to the left and right each with a 4-fold revolver stop. PSF - Pneumatic tensioning device for sashes against the side stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips as an edition. Pos. 1.1 Article 6315 RU-BM-... fittings adjusted to customer specifications Pos. 1.2 Article 0500000 Holder tailored to customer punch/- assembly of one provided by the customer Hardware punch or hardware scissors (third-party product) on the sash assembly table. Please specify make when ordering!!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Options fitting bearing for RU-BM-3000: ----- Fixed fitting bearing variant: price EUR 3,210.00 Article 0630000 RU-BL-30/30 fitting bearing permanently mounted mounted above the wing assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each Separate partitions. Freestanding fitting bearing variant: price EUR 5,051.00 Article 0710000 RU-SBL3000/30 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2050 mm, Stand frame on the front without supports, 30 compartments, divided into 10 compartments in a row by dividers a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm. 4 angle supports for corner guides: Price: EUR 586.00 Leg length 120x120mm; angle approx. 3° The front edge of the angles is bent upwards by 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the hardware storage. ----- Additional charge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to a maximum height of 3000 mm with RU-SH, special screwdriver length 3500 mm, Width 1400 mm, inclination of the working platform manually adjustable. Usable width approx. 3000mm Additional price for RU-BM 3500 to RU-BM 3000: EUR 2,697.00 Bolret Tq Aaohpqwswl Fittings bearing for RU-BM-3500 (only possible free-standing): Price EUR 6,394.00 Ar...

Condition: ready for operation (used), Type: SVRM 4R - Lineair 4 rollen afzonderlijk hydraulisch aangedreven = geen slip, speciaal voor conisch walsen Bwjlrhowgfy Njpqwjl 4 geharde rollen 6 digitale uitlezingen conische buiging, kleinste diameter van de kegel is 1100 mm met de bovenrol kunt u zowel dunne als dikke platen verwerken (hydraulische bombering van de bovenrol) maximale snelheid: 7,5 m/min (variabele hydraulische snelheid) Machine met hoge nauwkeurigheid omdat er gebruik wordt gemaakt van lineaire geleidingen voor de zijrollen. Dit betekent dat de zijrollen op geen enkele manier kunnen doorbuigen! (nieuwe machines worden vanwege de hoge kosten niet meer met lineaire geleidingen geproduceerd, in plaats daarvan worden planetaire geleidingen gebruikt, die van mindere kwaliteit zijn) De machine is uitgerust met een backload-functie een kantelcilinder die verbonden is met de bovenste rol; hiermee kan de operator een opwaartse of neerwaartse belasting op de bovenste rol uitoefenen om doorbuiging van de bovenste rol tegen te gaan = bombering van de bovenste rol een ongelooflijk zeldzame functie! De machine is uitgerust met een schokdempersysteem dat handig is om een gewalst werkstuk na het lassen te kalibreren. Dankzij dit schokdempersysteem kan de machine de naad die na het lassen ontstaat, opvangen. Bij het walsen van het onderdeel en het passeren van de naad tussen de boven- en onderrol, worden de schokken niet overgebracht op de lagers en wordt de machine niet overbelast. Een andere unieke eigenschap van deze buigrol is de verhoogde capaciteit voor voorbuigen. Hiervoor moet u de plaatdikte vermenigvuldigen met 1,8. Bijvoorbeeld, een plaat met een dikte van 40 mm x 1,8 = 72 mm. Standaard moet u vermenigvuldigen met 3, voor een plaat van 40 mm komt dit neer op 120 mm. Tijdens het walsproces kunnen alle andere hydraulische bewegingen gelijktijdig worden uitgevoerd. 2 hydraulische plaatondersteuningssystemen (links en rechts) voor het walsen van werkstukken met grote diameter hydraulische verticale bovensteun ter ondersteuning van het plaatwerk tijdens het walsen, maximale diameter van het werkstuk met deze steun is 6300 mm

Condition: used, mileage: 334,062 km, Year of construction: 2001, Serial number: YV2E4CBA31B29xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18503 Bwjlrhpjvgx E Tsqwol Specifications: - 2001 model - 334,062 km - Eu-approved until 16.08.25 - Euro 2 - Engine brake - Manual transmission - Century superconstruction - Ramsey winch - Cradles - Internal width plan: 2,200 m - Internal length plan: 5,664 m - Climate - Light - Radio - Delivery by agreement Description: Volvo FL6 is sold with cradle and winch. Everything works as it should according to the previous owner. The truck starts very easily, and there is a service history. Delivery by agreement. Km: 334062 Technical approved: Yes EU-approved until: 16.08.2025 Own weight: 6300 Total Weight: 7490 Payload: 1115 Width: 250 Length: 790 Euro: 2 Gearbox: Manual

Condition: used, Year of construction: 2018, Weinig Dimter Unicut P Automatic cross-cut saw Automatic cross-cut saw UniCut P Integrated system consisting of cross-cut saw and motorized positioning slide. Fast, exact and safe cutting of individual parts or series. Very safe working. Workpiece is held pneumatically during cutting. Cutting area generously encapsulated. Good view of the cutting area thanks to transparent, impact-resistant polycarbonate hood. BG certified. Saw motor 7.5 kW Saw motor with increased power for particularly hard wood-based materials and large workpiece cross-sections or large packages or at high cutting frequency (e.g. when cutting pallet blocks). Outfeed table 2.4 m for manual removal of the workpieces by the operator OptiCom Assist control Reliable work thanks to specially developed SCS (Smart Control System) control device. Largely insensitive to dust, vibrations or temperature differences. This makes it very durable. Production parameters are securely stored regardless of electrical voltage. Backup of production data statistics approximately every 15 minutes. Easy-to-read display device with backlight, individual adjustment of contrast and brightness. Separate function and number keys. Immediate continuation of work after power failure. The operation is very simple. No PC skills are required. The following operating mode is available: Automatic length cutting: After entering the length of the wood, the best fixed length combination is calculated according to the fixed lengths of the cutting list. This process maximizes the wood yield. Description: Motor power: 7.5 kW Electric 400V 50Hz - 3-Ph Cutting height: 120 mm Cutting width: 20-300 mm Push-up system: Push-up length: 6300 mm Extraction diameter: 1 x 150 mm Other comments: Opticom, length recognition and output table 2400 mm Total electrical load ca. 9kW Air consumption ca. 125 NL/Min. Working pressure Min. 6 Bar Air speed ca. 30 m/sec Dust extraction diameter 125mm Extraction volume req. 1.300 m³/h Bwelrhpjv Sblgsqwjl (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2017, Functionality: fully functional, input voltage: 400 V, volume flow: 6,300 m³/h, type of cooling: air, total length: 3,900 mm, total width: 1,050 mm, Air volume 6300 m³/h Air velocity 1.94 m/s Insulation 50 mm Filter M5 and F7 Fan power max. 2840 kW Bwslrewg Du Sjhpqwsl Heater: temperature air inlet / outlet -12 / 22 °C Cooler: temperature air inlet / outlet 32 / 20 °C

Condition: good (used), Year of construction: 1986, Functionality: fully functional, cutting diameter 420 mm saw band length 6300 mm cutting width 420 mm Bwslswgahzorhpqwjl capacity 90 degrees: square 420 x 420 mm cutting speed 20 - 130 m/min dimensions of saw-band 6300 x 38 x 1,3 mm sawing motor 4,0 kW Dimensions (LxWxH) 2420 x 3050 x 2150 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t Additional information Used fully automatic band sawing machine Smallest cut-off length 6 mm Automatic feed length single 600 mm Feed length multiple 5400 mm Minimum offcut length single cut 75 mm Automatic operation 115 mm * Hydraulic saw blade tensioning * Infinitely variable cutting feed * Hydraulic material feed * Automatic feed with horizontal vice, hydraulic material clamping, infinitely variable * Coolant device * Chip conveyor * Roller-type conveyor, approx. 2500 x 500 mm

Condition: used, output 7800 kVA voltage 6300 V turning speeds 1500 U/min frequency 50 Hz 0,8 Overspeed 1800 U/min Nominal current 715 A In our opinion, the system is in good used condition and can be inspected live by appointment. The system consists of: - Gas turbine, Turbomach, Solar Turbines Bwolrjwf D Amshpqwjl - Waste heat boiler, Wulff - Economizer, Wulff Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 1988, Panel saw Bwjlrowgbp Hshpqwjl Type: Std 6220A/G Year of manufacture: 7.88 Dimensions: 6300 x 2720 x 1235

Condition: ready for operation (used), Year of construction: 2019, Additional Equipment Optional: 1x print head kit / 1x material cartridge / 1x installation space filter / 1x fresh air filter This HP Jet Fusion MJF 580 color plastic 3D printer was manufactured in 2019. It features a power capacity of 6300W, operating on a voltage range of 200-240 Vac with a frequency of 50/60 Hz. Despite showing an error message, consider the opportunity to buy this HP Jet Fusion MJF 580 color plastic 3D printer. Contact us for more information. Application Types 3D Printing Bslrhpewgfz Tjqwewl

Condition: used, mileage: 263,000 km, Year of construction: 2017, Serial number: YS2R6X4000546xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20111 2017 Scania Tipper Truck Km: Approx. 263,000 (can increase) Transmission: Automatic Suspension: Air Euro 6, 581 hp Retarder Okay Tires Heating in the box Axle: 6x4 Building: Istrail Trailer hitch VBG Tool cabinet Rotor lamps Extra light Bed Radio/CD Air conditioning/AC Rear view camera Gone on gold agreement, last service performed on gold agreement Bwslrewdu I Dehpqwjl Videos Description: Well-maintained Scania Tipper truck from 2017. The truck has driven approx. 263,000 km and is well equipped with, among other things, Istrail building, trailer hitch, tool cabinet, and heating in the box. The truck has been on a gold agreement, and the last service has been carried out. Ready for delivery! Km: 263000 HK: 580 Technical approved: Yes EU-approved until: 31.08.2025 Own weight: 14100 Total Weight: 30000 Payload: 15825 Width: 255 Length: 740 Euro: 6 Gearbox: Automatic

Condition: good (used), Year of construction: 2017, The Milacron UMS16D twin-station extrusion blow molding machine was upgraded by the manufacturer to a standard 20-ton capacity. The machine features an additional cooling system from Eisbär to prevent moisture in the mold area. Manufacturer: Milacron Year of manufacture: 2017 Type: UMS 16.D Screw diameter: 100 mm Length-to-diameter ratio: 24 Max. screw speed when using high-pressure polyethylene: 72 rpm Max. plasticizing capacity with HDPE: 290 kg/h Tank hydraulic system capacity: 540 l Mold closing pressure: 200 kN Max. mold height: 485 - 535 mm Max. mold width: 510 mm Machine dimensions: 6300 x 8000 x 4700 mm Machine hours: 6000 h The overall picture shows the complete system with peripheral equipment: Bwslrhjv Ehbujpqwsl -The Milacron UMS16D blow molding machine (front right) -A leakage test/tightness test -The Spot Watcher IntraVis camera inspection (rear left) -The entire conveyor belt -and the Delta Engineering DCP200 flexible packaging machine from 2018, in the front left of the photo. The system also includes: -5 12,500 L silos and 2 25,000 L silos for plastic granules. -a blower with a mixing unit for plastic granules. The entire system can be purchased as a whole or individually. We would be happy to provide further information.

Condition: used, Year of construction: 2001, drilling depth: 800 mm, total height: 2,700 mm, overall weight: 10,800 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle motor power: 15 W, drilling capacity: 25 mm, travel distance W-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840 D, space requirement length: 5,600 mm, space requirement width: 4,910 mm, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 800 mm .. Y-axis travel: 600 mm .. Z-axis travel: 800 mm .. W-axis travel: 1250 mm .. rotating range B-axis from: 0 ° .. rotating range B-axis up to: 360 ° WORKING RANGE -BORING- .. drilling depth (max): 800 mm .. drilling capacity full bore (steel): 25 mm SPINDLE / HEAD .. tool fixture: HSK A50 .. drive power: 15 kW AXIS DRIVES .. feed velocity (max): 15000 mm/min TOOL MAGAZINE .. number of positions: 20 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Bwolrhewgcvhspqwjl DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5600 mm .. space requirements -front/back-: 4910 mm .. total height: 2700 mm .. total weight approx.: 10800 kg 20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and various tool holders

Condition: good (used), Year of construction: 2006, Ref. -No.: 10402 Manufacturer: GILDEMEISTER Type: Gildemeister GMC 35 ISM Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840D PowerLine Storage location: Halberstadt Country of origin: Germany Bsljwfyy Ijrhpqwswl Machine-No.: 5702-0027 work spindles: 6 Turning Speeds: 6300 RPM C-Axis: Ausricht- und Schalteinrichtung Spindle passage: 32 mm Spindle power: 6 x 4 kW Capacity At 100% Load: 6 x 4 kW Max. Torque: 6 x 15 Nm Rapid Travel Speed X-Axis: 12 m / min Rapid Travel Speed Z-Axis: 12 m / min Travel -X Axis: 68/100 mm Travel -Z Axis: 68/100 mm Machine length: 7000 mm Machine width: 1800 mm Machine Height: 2400 mm Connected Load: 107 kVA Further information: Features: 5 cross slides for machining in X and Z Pick-up spindle freely programmable in position 6 5 front spindles of which 5 can be driven 4 U-axes electrically prepared 1 axis for back machining on the pick-up spindle Kraft and Bauer CO² fire extinguishing system Hinged belt chip conveyor Artis tool breakage control Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for backworking: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2006 Serial number 020440MA04 Bar length 3000mm Knoll high pressure system AE1114: Year of construction 2006 Filter system Pumps 5Bar and 40Bar individually adjustable for the processing steps Heat plate exchanger Lifting pump from the chip conveyor Machine is in operation under power and can be inspected by appointment.

Condition: excellent (used), mileage: 324,174 km, power: 250 kW (339.91 HP), first registration: 05/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 5,200 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space width: 2,460 mm, loading space length: 6,620 mm, loading space height: 2,450 mm, Year of construction: 2015, Equipment: ABS, cruise control, = More options and accessories = - Electric windows - Electrically adjustable exterior mirrors - Remote central locking - Low noise - Speed limiter - Central locking = Remarks = WDB9630031L920953 Refrigerator Brand: Thermo King = More information = AdBlue system: Yes Front axle: Steered Empty weight: .200 kg Payload: 8,800 kg GVW: 19,000 kg Refrigerator engine: Diesel and electric Technical condition: very good Visual condition: very good Contact Sales for more information. Bolrhpqsu Ezciowjwl = Company information = If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: ready for operation (used), Year of construction: 1995, General Data Measurements width 2576 Measurements depth 2583 Measurements height 2770 Machine weight 6300 Main Drive Bwjlovzup Rorhpqwol Spindle speed range 8000 Spindle motor power 47 A Tool taper BT40 Movement X-Axis Movement 800 mm X-Axis Feed Force 1-5000 mm/min X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement 410 mm Y-Axis Feed Force 1-5000 mm/min Y-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 510 mm Z-Axis Feed Force 1-5000 mm/min Z-Axis Rapid Traverse 15000 mm/min Workpiece Workpiece weight 700 kg Table Outer length 1100 mm Outer width 450 mm Tools Slots in storage 20 Max weight 8 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis MORI SEIKI MV 40B/40 vertical machining centre was manufactured in 1995. Consider the opportunity to buy this MORI SEIKI MV 40B/40 vertical machining centre. Contact us for more information. Application Types Milling