Used Valtra/Valmet 6300 for sale (344)

Condition: good (used), - Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3800 mm - Width : 1850 mm - Height: 2700 mm Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2 Kdedpfx Asi Ew Daog Ajw

Condition: like new (used), Year of construction: 1992, Retrofitted: 2023 Numerical control: SELCA 4045D Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 1200 mmZ axis traverse: 1250 mm Milling head Head type: Universal manualTool clamping system: HydraulicTaper nose: ISO 50 (DIN 2080)  /  Pull stud: DIN 69872Speed range: 20 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accesories Kjdpfx Aougbqyjg Aedw  Electronic handwheel: Joystick SELBOX S2External coolantGuarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: as good as new (ex-display), Exhibition machine - SBW 6300H Holzprofi band saw for wood Kodpfewzzipjx Ag Ajdw Technical data: Motor output: 5 HP, 400 Volt Wheel diameter: 630 mm Cutting width: 622 mm Cutting height: 400 mm Table size: 850 x 600 mm Blade width: 8 - 38 mm Tilt table up to: 45° Band length: 4600 mm Weight: 400 kg Subject to price changes, errors, misprints and typographical errors reserved.

Year of construction: 2010, condition: used, Servo motor, electric motor, DC motor Kdedpfx Ajfbyc Nsg Asw -Max. Speed: 3000 rpm -Power: 3.42 kW -Torque motor: 14.9 Nm -Shaft: Ø 32 x 58 mm -Construction: B5 -Dimensions: 320/138/H165 mm -Weight: 15 kg

Condition: ready for operation (used), Gildemeister VD030K AES2 card + Gildemeister 0.88.630-0 SI0ADP additional board, used, normal signs of use, 100% functional, scope of delivery as per photos Kedotztftopfx Ag Aodw

Condition: ready for operation (used), Year of construction: 2024, Two identical and unused medium-voltage transformers for substations are available. Rated power: 63MVA, high voltage: 115kV, switching group: YNyn0 (d), cooling type: ONAN/ONAF, insulating fluid: Shell Diala S4 ZY-I, PCB content: below 1ppm. Machine dimensions X/Y/Z: approx. 7200mm/3600mm/4000mm, total weight: approx. 86000kg. The machines were never connected. Documentation available. On-site inspection is possible. Individual sale possible. Kdsdovt Ayuepfx Ag Asw

Condition: new, BRAND NEW Kdodpfx Ajv H A Tnjg Aow Quantity: 12 pieces Industrial computer with 15.6" touch panel New equipment, packed, in original packaging When buying more than three pieces of this product, a 25% discount

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Kedpfjrlk Dcox Ag Aedw

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: AK316, roller (bottom) diameter: 270 mm, roller (top) diameter: 300 mm, roller diameter: 350 mm, roller length: 3,100 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 16 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness copper (max.): 16 mm, overall weight: 8,000 kg, total length: 4,500 mm, total width: 1,300 mm, total height: 1,500 mm, type of input current: three-phase, working length: 3,100 mm, Equipment: documentation/manual, emergency stop, 3roll 3000x16 mm MG MODEL AK316 plate bending machine Surface width 3100 mm -Top roll 300 mm -Side rolls 270 mm -Power electric 10 Hp Kjdpfx Ajv Agkpsg Aodw -Weight 8 ton Capacity -plate width 3000 mm -plate thickness 16 mm -pre-bend 12 mm Rolling diameter from 350 mm and above Configuration complete for use: -the 3 rolls hardened high surface strength -the 3 rolls driven hydraulic with axial planetary gear individual each roll synchronized rolling speed hydraulic automatic balance -conical bending attachment for cone bending -re-rolling system for seam welded shells -console centralized with hydraulic commands -Digital position readout to repeat bending with accuracy -Safety installations with emergency stop. -Manuals of instruction DIMENSION 4500X1300XH1500 MM Machine in very good conditions

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 192 mm -Number: 1 cutter Kdedpsb A Sqrsfx Ag Ajw -Price: complete -Weight: 5 kg

Condition: used, machine/vehicle number: n/a, We offer the following for sale here: Kdodpju Egndofx Ag Aow Manufacturer Fanuc suitable for series P-200 Item condition: used Please ask for shipping costs.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 020564, turning length: 2,980 mm, turning diameter: 660 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, total height: 2,000 mm, total length: 6,510 mm, total width: 2,370 mm, quill diameter: 100 mm, quill stroke: 200 mm, swing diameter over cross slide: 400 mm, turning diameter over bed slide: 433 mm, workpiece weight (max.): 2,000 kg, overall weight: 5,300 kg, We are offering our cycle lathe for sale here. This is a bad investment that we never put into operation. Kdjdswycnqepfx Ag Aew * CNC control Siemens 810 D * Automatic 8-position SAUTER turret, tool holder VDI 40 * 3-jaw power chuck, diameter 300 mm * Chip conveyor * 2 steadies * Central lubrication * Mahle changeover filter system

Year of construction: 2008, condition: excellent (used), Item number: KOMKRT2 Manufacturer: Ruwag Type: DS 63000 M Zone 22 Year of construction: 2008 Machine no.: DS6/200820 Length [mm]: 700 / 1200 Width [mm]: 700 Kjdpfoft S Twox Ag Aedw Height [mm]: 3050 Weight [kg]: Approx. 400 Connected load: 400V / 1,5KW

Year of construction: 2008, condition: as good as new (ex-display), 1 pc power oil transformer 63MVA 110/10.5kV, YNd1, OLTC ( ±8x2% ), ONAN/ONAF, manufacturer KOLEKTOR ETRA Slovenia, never used, stored according to manufacturer's instructions, we will provide further information upon interest. Kdjdpjitcl Djfx Ag Asw

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 192 mm -Number: 1 cutter -Price: complete -Weight: 1 kg Kedpfeb A Sqvsx Ag Aodw

Condition: used, Price: On request Overhead crane Abus Lifting capacity: 6300kg Lifting height: 7500mm Span: 19000mm Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. Kjdpfowh Niqjx Ag Asdw - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, operating hours: 5,903 h, load capacity: 1,400 kg, lifting height: 6,300 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, empty load weight: 3,000 kg, mileage: 5,903 km, Received in trade-in. BT brand triplex reach truck from 2006 is in good condition; capacity 1,400 kg; lifts up to 6,300 mm; overall lowered height 2,700 mm; equipped with FREELIFT and SIDESHIFT. 5,903 hours on the meter; 2006 battery with external charger; video to follow. Kdedpfx Agjxturlo Aew

Condition: ready for operation (used), Forging hammer CM 2500, Romania. The hammer is similar to Huta Zygmunt MPM 6300B. - Maximum impact energy at maximum stroke – 7000 kgm - Ram weight – 2500 kg - Mode of operation – pneumatic Kdodpfjw Sdxaox Ag Ajw - Ram stroke – 850 mm - Number of blows per minute – 100 - Working pressure – 5 - 7 bar - Anvil weight – 48 t - Total weight – 65 t

Condition: used, machine/vehicle number: WMAH23ZZ86W06xxxx, mileage: 630,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 17509 Specifications: - Km: Approx. 640,000 - Engine brake - Suspension: Steel - Air - 6x2 - Tires (see pictures) - Webasto - 480 Hp - Axle shaft tooth to 2: 260 cm - Extra light - 2 x beds Kdodpjw Upcpjfx Ag Aow - Radio/CD - Climate/AC - Services are taken by owner and at the workshop - Ready for delivery Description: MAN 6x2 truck from 2006. The truck is ready for delivery. Services have been taken at a workshop, but some have also been taken by owner. Km: 630000 HK: 480 Technical approved: no EU-approved until: 23.07.2025 Own weight: 8500 Total Weight: 28000 Payload: 19425 Width: 255 Length: 623 Euro: 3 Model: TGA 25.480

Condition: used, Year of construction: 1994, total length: 6,300 mm, total width: 2,000 mm, total height: 1,800 mm, Empty weight: 24.000 kg Price: On request - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 10659 - Max. sheet thickness: 25mm - Top roll diameter: 350mm - Max. working width: 3000mm - Drive: raulisch - Number of rolls: 4 Kjdpfoxyklnex Ag Aodw - Bottom roll diameter: 300mm - Control: Conventional - Transport dimensions: 6300mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 24000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, Ref. -No.: 10613 Manufacturer: GILDEMEISTER Type: GM 20 Year of construction: 2008 Type of control: NC Control: Gildemeister Storage location: Halberstadt/Hamburg Country of origin: Germany Further information: Machine type: GM 20-6 Number of spindles: 6 Number of cross slides: 6 (4) Number of tool spindles: 6 Max. bar diameter for round material: 20 mm (25 mm spec.) Max. across flats for hexagonal material: 17 mm (21 mm spec.) Max. across flats for square material: 14 mm (17 mm spec.) Max. bar feed in one working station: 100 mm (125 mm spec.) Max. bar feed in two working stations: 180 mm Max. bar feed in one station for double-cycle operation: 100 mm (125 mm spec.) Max. stroke of radial slides: 42 mm Radial slide adjustment forward/backward: ±8 mm Max. stroke of axial slides: 50 mm Axial slide adjustment forward/backward: ±8 mm Max. stroke of tool spindles: 86 mm Tool spindle adjustment forward/backward: ±11 mm Max. stroke of guide block: 50 mm Axial adjustment of guide block: 160 mm Max. thread (right-hand): 20×1.5 mm Max. thread (left-hand): 14×1.5 mm Speed of main spindles: 450–5000 rpm Cycle time (min.–max.): 1.4–60 s Rapid rotation per cycle (idle time per cycle): 150° passive degrees Base machine rotation (standard without spindle stop): 0.7 s (0.5 or 0.9 s spec.) Base machine rotation with loading device: 0.7 s Rotation with spindle stop and loading magazine: 0.7 s Number of tool positions: 12 Kdsdpfx Agexxpdms Aew Coolant tank capacity: 600 liters Nominal power of spindle drive motor: 11 kW Speed of spindle motor: 750–3500 rpm Dimensions (L×W×H) without bar guide: 3700×1500×1890 mm Dimensions (L×W×H) with bar guide: 5800×1500×1890 mm Net weight of machine without bar guide: 5260 kg Gross weight of machine without bar guide: 5860 kg Net weight of machine with bar guide: 5700 kg Gross weight of machine with bar guide: 6300 kg Machines can be inspected under power.

Condition: used, Year of construction: 1995, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Kdsdpfx Asvvkqyjg Ajw Storage location: Nattheim

Condition: used, Year of construction: 2004, Price: On request Undercut crosscut saw Weinig Dimter Opticut S 75 Serial no. 1832.14 Year of construction 2004 Automatic feed system Max cutting height 160mm Max cutting width 360mm Up to 60 m/min Kjdpfjwnhk Hsx Ag Asdw Dimensions machine 1300x1300x1700 mm (LxWxH) Dimensions input table 7600x2000x1100 mm (LxWxH) Dimensions output table 6300x2100x1050 mm (LxWxH) Available by week 7 in 2025 - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 1832.14 - Max. saw height [mm]: 160 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Kdjdpfxjvvkq Ho Ag Ajw Storage location: Nattheim

Condition: used, Year of construction: 1991, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 6300 x 1200 x 2900 mm Motor power: 5.5 kW Kdjdpevvkthjfx Ag Aow Storage location: Nattheim