Used Mc Cormick Mtx 200 for sale (17,344)

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Bolt circle: Ø 145 x 18 mm -Hub bore: Ø 110 mm Bledpfxjyxnrls Abwof -Submission/Price: complete -Dimensions: Ø 460 x 200 mm -Weight: 35 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant Blsdpfsyxnpdsx Abwef -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 12 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires Bedpfx Aoyxnbajbwjlf -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Bledpoyxx A Iofx Abwef Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: new, total length: 4,000 mm, Year of construction: 2023, load capacity: 5,000 kg, Crane JMG MC 22500RE Drive Electric Year built 2023 Bljdpfsygngqox Abwjf Lifting weight (kg) 5,000

Condition: used, total length: 4,500 mm, Year of construction: 2023, load capacity: 13,000 kg, - Antrieb: Vorderachse über zwei 8,5 kW 80V AC Elektromotoren, Isolationsklasse H. - Batterie: 80V – 900 Ah mit Lade- und Batteriefüllstandsanzeige. Arbeitszeit bis zu 8 reinen Kranstunden. - Bremsen: Automatisches Bremssystem wirkend auf alle Räder. Bljdpfx Aoyydgzebwef - Rahmen: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten. - Reifen: Vorne no. 4 superelastisch 300x15” Hinten no. 2 superelastisch 200x15” - Ausleger: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten, Aufgebaut in 4 vollhydraulischen Teleskop-Elementen. Auslegerwinkel: +65°/-5°. - Hydrauliksystem: Angetrieben durch leise Zahnradpumpe (19kW), Isolationsklasse H - Hydraulikbedienung über Joystick und Hebel an der Funkfernsteuerung - Filter und Sicherheitsventile - maximaler Betriebsdruck 22MPa. - Lenkung: Über Hinterachse mit Elektromotor. Lenkeinschlag +90°/-90°. - Motorpumpe: Elektromotor 19kW 80 V AC, Isolationsklasse H. - L.M.I.: Elektronische Lastbegrenzung “CE Standard” - Mit Sicherheitsleuchten und folgenden Displayanzeigen: Angehobene Last, Maximal zu hebende Last, Prozentuelle Lastanzeige, Arbeitsradius, Auslegerwinkel, Gewähltes Programm. - Eigengewicht: 14.000 KG davon 4000 KG abnehmbares Kontergewicht. - Abnehmbare Kontergewichte: Entwickelt für schnelle De- und Remontage, um jederzeit die Boden- und Achsbelastungen zu optimieren. - Funkfernbedienung: Auf alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen. - Kran Klassifizierung nach UNI ISO 4301 - 1: A3

Condition: excellent (used), CATALOGUE NO. 6623 TECHNICAL DATA - Output log diameter: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Configuration: - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – German-made – Ability to turn posts into cones – Used rounder, in very good condition Net price: 98,900 PLN Net price: 23,550 EUR (based on the rate of 4.2 EUR) Bjdpfox Rqzasx Abwjlf (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer of the manufacturer. All trademarks and names are used solely for identification purposes. We resell only goods that have already been placed on the market by the manufacturer. MAR-MASZ has no business relationship with the manufacturer.

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication Bodpfx Asyk Hg Rebwolf - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F Bsdpfxsyxdtxs Abwolf -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc.

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input Blsdpfxoh Szaco Abwsf -Manufacturer: Siemens, Simatic S7 Profisafe electronic module ET 200S -Electronic module: Type 6ES7 138-4FA04-0AB0 -Terminal module: 6ES7 193-4CF50-0AA0 -Dimensions: 155/35/H75 mm -Weight: 0.2 kg

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 Profisafe electronic module ET 200S -Electronics module: type 6ES7 138-4FA04-0AB0 Blsdpfjibbp Uox Abwsf -Number: 3x module available -Price per piece -Dimensions: 50/30/H80 mm -Weight: 0.1 kg/pc.

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 Profisafe electronic module ET 200S -Electronics module: Type 6ES7 138-4FB03-0AB0 -Terminal Module: TM-E30C46-A1 -Number: 9x module available -Price per piece Bledpfx Asmdyf Tsbwof -Dimension: 160/30/H80 mm -Weight: 0.2 kg

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input -Manufacturer: Siemens, Simatic S7 Profisafe electronic module ET 200S Bledpjh Sy U Refx Abwef -Type: 6ES7 138-4FB03-0AB0 -Dimensions: 50/30/H80 mm -Weight: 0.1 kg

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 Profisafe electronic module ET 200S -Electronics module: Type 6ES7 138-4FA04-0AB0 -Terminal Module: TM-E30C46-A1 -Number: 12x module available -Price per piece Blsdpemdyf Nsfx Abwsf -Dimension: 160/30/H80 mm -Weight: 0.2 kg

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 electronic module ET 200S -Electronics module: type 6ES7 138-4FR00-0AA0 Bledpfxjmdyfde Abwsf -Terminal Module: TM-E30C46-A1 -Number: 12x module available -Price per piece -Dimensions: 160/30/H80 mm -Weight: 0.2 kg/pc.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,880 h, load capacity: 2,000 kg, lifting height: 1,700 mm, free lift: 76 mm, fuel type: electric, mast type: simplex, construction height: 1,348 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Pedestrian stacker Load centre: 600 mm Mast type: Standard Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 26V Bodpeyxtwyefx Abwslf Battery capacity: 105Ah Battery year: 2019 Description: Factory-refurbished used unit by Toyota, incl. new inspection and new approval according to FEM (formerly UVV). Pulse control, initial lift, CE certificate,

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: Mazatrol Fusion 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Swivel time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Bljdpfxeyxmq To Abwsf Clamping surface: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Distance from spindle to table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool positions: 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent spaces free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS Control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirement: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip tray Tool measurement Documentation

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Bsdsyu N Uxepfx Abwjlf

Condition: used, Year of construction: 1984, pressure 200 t distance between columns 1800 mm stroke 710 mm Distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1600 x 1300 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 250 mm die cushion area 1400 x 1080 mm table height over floor 800 mm side window 800 mm ram surface 1660 x 1300 mm speed down 400 mm/s speed up 410 mm/s working speed 14,3 - 49,7 mm/s power requirement 38,0 + 13,0 kW weight 25,0 t Dimensions (WxDxH) 3,65 x 3,3 x 5,4 m height over floor 5,05 m height beneath floor 0,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning (in side frame), mechanical depth stop (motoric adjustable), mechanical ram interlocking, two-hand operation Blodpfjyx Ilrjx Abwof can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is Bljdpfsxwdrvjx Abwef WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm Bledpfx Abjvzxqrewef die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Blodpfsvuumiex Abwef Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg Bljdperw Daaofx Abwjf

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Bedjywg E Ispfx Abwjlf Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: ready for operation (used), Year of construction: 2015, Working container volume: 200 l Usable volume: 125 l Max. workpiece (diagonal): 170 mm Screen area: 2190 cm² Max. centrifugal force: 49,000 N Coating partially damaged. Blsdpfswcd Nzox Abwsf There are 2 units available!