Used Mc Cormick Mtx 200 for sale (43,586)

Condition: used, Year of construction: 2006, Control: MSX-850III Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws Bwelswg Egvjra Dtbel programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: like new (used), operating hours: 83,500 h, machine/vehicle number: IntNr231113, IntNo. 231113 Goods tariff number 8457 10 10 00 Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-station plate changer and 4-station pallet station NC rotary table 360° Precision package Tool holders Steep taper: HST 100* DIN 69893 Form A Tool magazine positions chain: 1 x 90 & 1 x 90 Chip conveyor including belt filter from Knoll BILUTEC Air Technology – Filtration Systems Machine number: 28840003102 Year of manufacture: 2001 Control system: Siemens Sinumerik 840D Operating hours: approx. 83,500 h Specifications Technical data Main drive • Direct drive via liquid-cooled, variable-speed induction motor • Speed ranges, continuously programmable: o Operating mode: 0 to 6,000 rpm Bwelra Dtjwfqy Sobol o Setup mode: 0 to 800 rpm o Manual Interventions: 0 to 5,000 rpm • Torque: o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft) o S6 – 40% duty cycle: max. 440 Nm (322 lb-ft) • Power: o S1 – 100% duty cycle: 25 kW (33 hp) o S6 – 40% duty cycle: 37 kW (49 hp) Feed drive • 3-phase AC synchronous servo motors • Feed rate of the X/Y/Z axes: o Continuously programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min) o Rapid traverse: 40,000 mm/min (1,575 in/min) o Set-up mode: 1 to 2,000 mm/min (0.04 to 79 in/min) o Manual interventions: 1 to 5,000 mm/min (0.04 to 200 in/min) • Feed force: o X/Z axes (100% duty cycle): max. 15,000 N (3,372 lb) o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb) Measuring system • Resolution, smallest input step: o X/Y/Z axes: 0.001 mm (0.0004 in) • Position tolerance (according to VDI/DGQ 3441): o Direct measurement of the X/Y/Z axes: 0.010 mm (0.004 in) o Direct measurement of the B-axis: 14 arc seconds Rotary table • Speed: max. 19 rpm • Clamping force of the pallet: 120,000 N (27,000 lb) • Tilting moment: max. 16,000 Nm (3,520 lb-ft) • Tangential moment: max. 4,800 Nm (3,523 lb-ft) Pallet • Quantity: 1 • Size: 500 x 630 mm (19.7 x 24.8 in) • Permissible load per pallet: o When using 1 pallet: max. 500 kg (1,102 lb) o When using 2 pallets: max. 900 kg (1,984 lb) • T-slots: o Quantity x width: 4 x 14 mm (0.16 x 0.55 in) • Guide slot: o Quantity x width: 1 x 14 mm (0.04 x 0.55 in) Working area • Travel range: o Tool diameter greater than 200 mm (7.87 in): o Tool diameter less than 200 mm (7.87 in): o Asymmetric travel range: o X-axis: 800 mm (31.5 in) o X-axis: mm (+19.7/-15.7 in)  Y-axis: 710 mm (27.9 in)  Z-axis: 710 mm (27.9 in)  B-axis: 360° Machine size: 4,600 x 2,400 x 2,700 mm Machine weight: 10,500 kg 1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg 1x Control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg 1x Chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg 2x Pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg 1x Euro pallet with hydraulic unit 1x Euro pallet with some accessories 1x Euro pallet with covers: L = 200 cm x W = 100 cm 1x Filter holder: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg 1x Tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg 1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg Delivery time at short notice upon request. The machine can be inspected by appointment. Subject to changes and errors in the technical specifications and information, as well as prior sale! Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, spindle diameter: 130 mm, spindle speed (min.): 3,000 rpm, travel distance W-axis: 1,600 mm, workpiece weight (max.): 12,000 kg, worktable width: 1,600 mm, worktable length: 1,800 mm, TOS Varnsdorf WHN 130Q Siemens CNC 840D Year of make 2000 X- axis 3000mm Y- axis 2000mm W-axis 1600mm Z-axis (spindle) 560m Bslra Dswf Ncrotbjwl Spindlediameter 130mm Spindle kon ISO 50 Spindle speed 3000 omdr Spindle motor 37kW Table 1600 x 1800mm Table capasaty 12 ton C-akse 360.000 degreed ATC 60 tools

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Bslra Dtjv S Ad Rjbjwl Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.

Condition: good (used), Functionality: fully functional, Temperature max: 300° Celcius Inner size LxWxH: 2.000 x 2.000 x 2.000 mm Heating: Hot Air Circulation Power: 75 kW County of origin: Germany Outside dimensions LxBxH: 350 x 330 x 220 cm Weight: 2.000 kg Bolswc R Idera Dtbswl

Condition: excellent (used), Catalogue number 6809 TECHNICAL DATA - track width 350mm - shaft width 370mm Bjlelrvg Aora Dtbswl - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm from above: - deflectors - pressure sliding shaft - deflectors - 2 smooth sliding shafts - deflectors - shaft with 75kW saws - 3 smooth sliding shafts - deflectors - smooth sliding shaft from below: - sliding roller - deflectors - track - shaft with 95kW saws - track - 1 output shaft, toothed, pulling - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the body upper top/bottom 1.1kW - automatic central lubrication - smooth regulation of feed speed 3kW - diameter of the exhaust nozzle 190mm, 200mm - feed table with guide and pneumatic clamp rollers in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length/width/height 6520x1300x1050mm - dimensions of the machine length/width/height 2850x2410x2170mm - total weight approx. 8000kg ADVANTAGES - Italian production - DTR documentation - two-shaft - with feeder - used multi-saw, very good condition Net price: PLN 197,900 Net price: EUR 46,560 depending on the price EUR 4.25 (Prices may change with with higher fluctuations)

Condition: used, Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system Bjlowglnyera Dtbewl equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid Bwolraewbqnbj Dtbol

Condition: used, Year of construction: 1962, pressure 025 t Belrjvuudnea Dtbswl throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 2000, Condition: defective spare-parts repository (used), This extruder from Changzhou Shuangli Transmission Machines Co, Ltd is in machine storage at Plastima Used Machinery. The machine is in fine condition. Brand: Changzhou Shuangli Transmission machines Co, Ltd Model: 200 Motor power: 37 kW Screw Ø: 50mm Single Screw Bjlra Dotuu Ugetbswl

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom Bwslrsudqkdsa Dtbel 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Bwelra Dtsq H Sqdsbel Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Year of construction: 2005, Travel: X-1040 mm, Y-600 mm, Z-500 mm Control: Siemens 810D powerline Spindle speed: 12,000 rpm Spindle mount: SK40 tool magazine: 30 pos clamping surface: 1,250 mm x 600 mm Bolswdyitora Dtbswl max. table load: 800 kg Internal coolant supply (IKZ): 40 bar equipment: Chip conveyor, spindle cooler, internal cooling, measuring probe, tool measurement, documentation;

Condition: good (used), Year of construction: 2002, Controll : MC4 Clamping force: 1000 t Bolrswb Evyea Dtbewl Screw diameter: 85 mm Shot weight: 2452 g Distance between tie bars V: 1120 mm Distance between tie bars H: 1400 mm Shot volume: 2450 cm3 Type: Horizontal Drive: Hydraulic Mould Height Min/Max: 700-1200mm Opening stroke max.: 1700mm Daylight: 2400mm Hotrunner pneumatic controls: 4 Cascade controls penumatic and hydraulic : 4

Condition: excellent (used), Year of construction: 2013, Type: CombiGrind 1500/200 Serial number: 1014 Year of construction: 2013 Hole plate diameter: 200 mm Mixer: 1500 litres, max 900 kg Cooling: Nitrogen (N²), 3 - 5 Bar Compressed air: 6 - 8 Bar Bslra Dtev Tnuwobswl Water supply: 4 - 6 Bar Power: 3 x 380V, 60Hz, 77kW Dimensions: 2100 x 3100 x 2500 mm Weight: 3000 kg With Bone Elimination System (BES) Including tool trolley Seperate exit for only mixing

Condition: good (used), Year of construction: 1998, Robot Kuka KR125/150/200 Manufacture Date 1996/1998 Reach 2400 mm Weight 975 kg/1025 kg Payload 125 kg, 150 kg, 200 kg Controller Type VKRC1 (VW/Audi Version) Weight 136 kg Software Version 4.1.7 SP08 Teachpendant Kuka VKCP1 Bslrajbywf Do Dtbowl Cable length 7m Larger number of pieces available Large volume sales preferred !

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical specifications: Roller carriage length 3200 mm Roller carriage cutting length 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at the width stop 1250 mm Length stop on the cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Bwslrsuvab Rea Dtbol Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: 7.5 kW motor Tele-Digit length stop With central digital, wireless 0.1 mm readout in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° - 90° on the aluminum sliding table, length and angle measurements adjustable via scale; For cutting to lengths up to 1375 mm with length compensation for preferred angles of 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, and 67.5°. Includes splinter wood, wall mount, and an additional factor scale for easily calculating incorrect miters for different workpiece widths. Swivel device for the cross slide. Quick, ergonomic sliding into the parking position. 2 clamps for trolleys. Current list price: €46,254.- Availability: Short-term. Warehouse location: Hochheim.

Condition: as good as new (ex-display), This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. Bwjlrouyg Adja Dtbsl

Year of construction: 1995, Condition: excellent (used), cutting width 150 mm Min. cutting length 250 mm cutting height 45 - 200 mm cutting kerf 1,3 - 1,4 mm stroke rate 400 #/ min main motor 11 kW feed speed 0,2 - 2,0 m / min feed speed variable central lubrication system incl. saw frame incl. manual dimensions L x W x H = 2500 x 750 x 1650 mm weight 2200 kg Advise used machines: Bjlra Dtohriz Debjwl • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Functionality: fully functional, Sleeve filter - galvanized metal structure - air flow rate 45,000/50,000 m3/h filter cleaning in backwash with air jet with control unit (new control unit, new solenoid valves) filtering surface 512 m2 n.01 decantation chamber dimensions 9000 x 2450 x h8000 mm n.05 ATEX explosion-proof ventilation panels discharge of filtered material: screw, rotary valve upper safety guardrail ladder electric control and start-up panel (possibility of supply with inverter) n.01 kw electric aspirator - to be defined with user Bsljwdmz Aora Dtbswl COMPLETE WITH CE DOCUMENTATION - USE AND MAINTENANCE MANUAL

Condition: excellent (used), Year of construction: 2002, Capacity: 1200x1000x600 mm WORKING CAPACITY Longitudinal (x): 1200 mm Vertical (z): 600 mm Cross (y): 1000 mm CNC Cnc: SIEMENS 840D SPINDLE Spindle power: 20 Kw Rotating speed: 24000 Rpm Torque: 38 Nm FEEDS Rapid x: 60 m/min Rapid y: 60 m/min Rapid z: 40 m/min Bwjlraewcyugs Dtbsl TABLE Floorspace (lxwxh): 1500x1000 mm ATC Positions: 30 Total power supply: 85 Kw Machine total weight: 18000 Kg

Condition: good (used), Year of construction: 2018, Projection welding machine and spot welding machine Manufacturer: WMA Schmidt & Bittner Type: PMP 11/200 Year of manufacture: 2018 As good as new, almost no operating hours Rated power (at 50% duty cycle): 200 kVA Connected load: 396 kVA Connector cross-section: 180 mm² Maximum welding current: 52.8 kA Throat: 350 mm Electrode stroke: 100 mm Bslra Det Hlphetbjwl ä170425

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Bwslra Djkwhdtotbjl Equipment and technical data: Solid German machine construction for trimming, cutting to length, sizing, mitre cutting etc. - Top operation with control panel positioned at eye level, swiveling, incl. template holder - 7" touchscreen control for electromotive positioning of cutting height, saw blade tilt adjustment, cutting width stop and optionally for height and side adjustment of the scoring saw tool database for 50 saw blades and display of the current speed. - electromotive height and tilt adjustment - saw blade tilt range from 0 47° - APA saw blade quick clamping system - main saw blade speed 3000/4000/5000/6000 rpm - Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm - Electromotive width stop with cutting width 1250 mm - Roller carriage with cutting length 3200 mm and blocking every 50 mm - Cross slide with support roller and sliding support widening in both directionsLength stop with mm scale and extension up to 3500 mm with 2 sliding hinged stops and 1 hinged end stop End stop can be used simultaneously as an angle mitre fence on both sides, infinitely adjustable from 0-46° with automatic length compensation and locking for 15°, 22.5°, 30°, 45° fixable- Push-button control with electronic soft start (start/stop)- Electronic wear-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at width stop 1250 mm electromotive- Length stop on cross slide extendable up to 3500 mm - Max. Saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast table top 1200 x 665 mm - plus table extension 750 x 655 mm- table extension 1430 x 940 mm - Table height / working height 900 mm- Extraction nozzle 120 mm on machine body, 80 mm on protective hood - Motor power 5.5 kW / 7.5 HP- Electrical voltage 400 V / 50 Hz- Roller carriage, length and width stop profile anodized - Machine body and swivel arm powder-coated Color anthracite RAL 7021Sheet metal protective cover top RAL 5000 violet blue, on machine body RAL 7035 light grey - Space requirement: 7110 x 4150 mm - Weight: approx. 1050 kg depending on version up to 1250 kg - CE compliant, GS tested, BG wood dust tested Special equipment: Incl. scoring unit 0.55 kW electromotive positioning for lateral and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table to a lateral parking position, allowing larger saw blades than Ø 350 mm to be used without removing the scoring saw blades Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by adjusting the scoring width by 0.05 mm per individual step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z =12+12 Incl. SWIVEL DEVICE FOR THE CROSS-SLIT Fast ergonomic sliding into the park position Incl. longitudinal stop with digital display mounted on each stop flap, adjustable to 0.1 mm, max. length 3300 mm Incl. transport pallet

Condition: used, Year of construction: 2003, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Max planing height: 125mm - Max planing width: 230mm - Year: 2003 Bwjlraswa Skne Dtbjl - Documentation available: No - Serial number: 13266 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Year of construction: 2005, Condition: refurbished (used), Completely overhauled, with a 12-month warranty -Maximum temperature 250°C -Interior WxDxH 1500 x 1500 x 2000 mm Bolrsu T Ntcja Dtbswl -Exterior WxDxH 2340 x 1950 x 2889/3029 mm -Capacity 4500 liters -SIMCON 32 controller -Air inlet and outlet nozzles -Floor load 1000 kg -Load (if floor is reinforced) 2000 kg -Empty weight 1380 kg Additional equipment: -2 recirculation fans, with new bearings -Drive-in lanes for one charging trolley or two small charging trolleys -Incl. 3 grid shelves with support rails - Feedthrough - Rated power 48 kW - Connected load 51 kW - Connection 400 V, 3 (N) PE AC 50/60 Hz - Not suitable for solvent-based materials - Includes documentation, CE declaration - Technical description (see attachment as PDF) We are happy to offer installation and commissioning. Inspections in our warehouse are available by appointment. Oven, ovens, drying oven, kiln, heating oven, heating cabinet, industrial oven, tempering oven, heating oven, tempering oven, drying cabinet, forced-air oven, forced-air chamber oven, curing oven, chamber dryer, chamber oven, forced-air chamber oven