Used Mc Cormick Mtx 200 for sale (17,015)

Condition: used, Please state your offer price. Nledpfx Aswk Dvqea Ejb Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Nsdjwk Dycepfx Aa Eolb Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, TURNING CENTER "MORI SEIKI" MOD. ZL 200SMC With twin powered turret and sub-spindle CNC MSC-501 Turning length: 452 mm Max. turning diameter: 388 mm Max. diameter over bed: 510 mm Distance between centers: 751 mm Spindle mount: A2-6 Spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of tools: 12 Nljdpfx Ajxwxwtoa Eob

Condition: ready for operation (used), Year of construction: 2006, operating hours: 13,006 h, functionality: fully functional, machine/vehicle number: 190433, turning length: 1,050 mm, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,050 mm, controller model: Mazatrol Matrix, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! Operating times according to control system: Total: 5,025 h Automatic machining: 1,866 h Pure machining RV1: 1,037 h Nlodpfxsy Slqfs Aa Eeb Pure machining RV2: 298 h Operating time: 13,006 h Tool type: Capto C6 Tool changer: 72 positions Turret: 9 positions TECHNICAL DETAILS Max. turning diameter: 660 mm Diameter over bed: 760 mm Turning length: 1,050 mm X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,050 mm Main spindle speed: 5,000 rpm Counter spindle speed: 5,000 rpm Milling spindle: 12,000 rpm MACHINE DETAILS Control system: Mazatrol Matrix Main circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current draw: max. 84 A Main motor voltage: 400 V Rated power: 91.8 kVA Weight: 11,800 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Njdey Txycspfx Aa Eolb Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5351126, controller model: Siemens 840D, number of slots in tool magazine: 42, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Tool holder: SK-40 Tool magazine: 42 positions MACHINE DETAILS Control system: Siemens 840D EQUIPMENT Nsdpfoy S S N Ijx Aa Eolb Tool breakage monitoring Filter unit: Knoll, type VRF 300/800 Chip conveyor: Knoll, type 340 K-1/100

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Nljdpfx Asy T Ikksa Eob Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Nledpjy T Id Dsfx Aa Ejb Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Nsdey T Iddopfx Aa Eelb Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Njdpoy Tnuvofx Aa Eslb Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8 Nledpfx Aohwi U Tea Eob

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Nodpfx Aaox A Hfvs Eslb

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm Nedpfx Aaec Snvfo Eolb electrical connection: alternating current 230 V weight: 14,5 kg

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Njdpfxsv Nw Npo Aa Ejlb Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: Nodpjw N S E Ajfx Aa Eslb The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 1997, Compressor Kaeser DS 200 Year : 1997 Nodpopgv Uzsfx Aa Ejlb 110 kw Block visc changé à 44 000 heures Number of hours in charge : 2 500 hours

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Nljdpfx Aaoy Ur Dws Eob Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 2,000 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, year of last overhaul: 2026, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Nedpjy Uruvjfx Aa Eelb Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Manufacturer: Doebeli Model: DPA 200 Nedpfjxal Ikjx Aa Ejlb Condition: Used

Condition: excellent (used), LDS Dactron COMET USB Shaker Control System Type: COM 200 Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System, Type COM 200, for controlling electrodynamic vibration testing systems. The system is suitable for random, sine, and shock tests in laboratories, industrial settings, automotive applications, as well as research and development. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Data 2-channel shaker control system USB interface Supply voltage: 100 – 240 V Frequency: 47 – 63 Hz Current consumption: 0.5 A Suitable for: Random tests Swept sine tests Shock tests Electrodynamic vibration testing systems Software / Functions Installed software according to system display: Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module: Value Swept Sine Activated option: Real Time Data Exchange Connections USB port BNC connectors Power connection Further connections, see images Calibration Calibration data according to label: Calibration Date: 2010-09-21 Due Date: 2011-09-21 The calibration has expired. A new calibration can be performed by the buyer if required. Condition Nedpfxoy Ugrps Aa Eolb Used equipment from an industrial application. Optical condition, see images. Normal signs of use and storage are present. The device was switched on. The indicator light and software display are active. Further functional or calibration tests have not been performed. Scope of delivery LDS Dactron COMET USB COM 200 controller Power cable / connection cable according to images Accessories according to images Scope of delivery includes only the items shown in the images. Notes Inspection possible by arrangement. Loading and shipping possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Nedpju R S Erofx Aa Ejlb Weight: 290 kg - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of slots in tool magazine: 16, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 50 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm Nlsdpfx Aasy Uvp Re Esb • Swing Diameter: 260 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and a robust turret with 16 tool stations, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 40 • Machine Type: EMAG VSC 200 TWIN Nljdpfx Aaey Uvf Ej Eeb • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Maximum X Travel: 850 mm • Z Travel: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN vertical turning machine was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent X and Z axis drives, it allows for the simultaneous machining of two workpieces. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN machine we have for sale. Contact us for further details. • Operation Type: OP 20 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: No • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 Nlsdpfx Asy Uuyboa Eeb • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 10 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and 30 m/min on the Z axis, this vertical turning machine offers efficient performance. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 10 machine we have for sale. Contact us for further details. • Operation Type: OP 10 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power 40% Duty Cycle: 39 kW • Spindle Power 100% Duty Cycle: 28 kW • Torque 40% Duty Cycle: 460 Nm • Torque 100% Duty Cycle: 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm Nlsdoy Uuxkepfx Aa Eob • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Approximate Machine Weight: 12,000 kg • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools No