Used Mc Cormick Mtx 145 for sale (3,247)

Condition: used, Year of construction: 1998, Panel Saw Putsch Meniconi SVP 145 Year of manufacture: 1998 - 6.2 kW - Panel size: 4200 mm x 2200 mm - Connection value: 400 Volt - Cutting depth: 60 mm - Overall dimensions: 5665 x 3170 mm required space - Depth: 1500 mm, free-standing - Saw blade diameter: 250 mm Bodpfx Aaowv Ud Neqewh Good condition

Condition: used, Year of construction: 1997, x-travel 660 mm y-travel 500 mm z-travel 600 mm table surface area 630 x 500 mm spindle taper SK 40 spindle turning speed range 20 - 6.300 U/min feeds 30 m/min Bwodpfeyg N Snex Aaqjh control PHILIPS CNC 532 internal coolant system feed 40 bar total power requirement 50 kW weight of the machine ca. 13,3 t with rotary pallet changer and hydr. swivelling head (horiz./vert.) Accessories: chip conveyor, coolant

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides Bwodpfxeyhdvko Aaqjh • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,100 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 1,988 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,045 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Very good Front tires Type: Pneumatic Bodjygn E Hspfx Aaqowh Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: With the MC25, available as a two-wheel or all-wheel drive, you can load loads safely and precisely on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimum safety at work. Discover the MC25, your new partner for more productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive technology in the MC 25-2 or MC25-4 or MC 30-2 or MC 30-4 version. Sideshift, 3rd valve, rear working lights, front working lights, semi-cab, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 590 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,085 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: As new Technical condition: Good Bedpfxjygn Ets Aaqowh Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Description: The MC30, available with either two-wheel or four-wheel drive, allows you to handle loads safely and precisely on any terrain. Its 30 cm ground clearance ensures excellent climbing capability in your fields. Excellent all-round visibility and a compact, robust design ensure optimal safety at work. Discover the MC30—your new partner for increased productivity! This Manitou all-terrain forklift is also available as the MC 25-2 or MC 25-4 or MC 30-2 or MC 30-4 with two-wheel or four-wheel drive technology. Sideshift, 3rd valve, 4th valve, full cabin, Cabin, heater, trailer hitch, beacon, work lights, mirrors

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck Bwodpfx Asx Hwf Roaqeh

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, controller manufacturer: FANUC, controller model: SERIES 18i-MB, total height: 3,300 mm, total length: 2,700 mm, total width: 2,700 mm, table width: 470 mm, table length: 1,500 mm, spindle speed (min.): 36 rpm, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 125 mm, input voltage: 400 V, Equipment: chip conveyor, STAMA MC 526 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 45 A - Table with three T-slots - Incl. 4th axis - Incl. 42-position tool changer - Overhang: 350 mm Bsdpfxox E Tt Ie Aaqjwh - Working spindle bearing diameter: 65 mm - Incl. chip conveyor and coolant system - Note: without the clamping devices shown in the photos Notice: The item must be collected bindingly between 04 and 12 March 2026 on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: new, total length: 4,000 mm, Year of construction: 2023, load capacity: 5,000 kg, Crane JMG MC 22500RE Drive Electric Bwedoygngqjpfx Aaqeh Year built 2023 Lifting weight (kg) 5,000

Condition: used, Koppelbox Eigensteuerung / Couple Box SelfControl MBO MS / MCKoppelbox Eigensteuerung (Trafokasten) für 24 polige Stecker Couple Box SelfControl (transformer box) for 24 pin connectors Bedpfx Ajrnvgisaqjwh Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1998, machine/vehicle number: 42016, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11Anlage besteht aus / Booklet Maker consist of:Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Bwjdpfx Asibuq Doaqeh Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/hBroschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,610 h, load capacity: 1,450 kg, lifting height: 4,150 mm, free lift: 1,478 mm, fuel type: electric, mast type: triplex, construction height: 1,955 mm, fork length: 1,200 mm, empty load weight: 1,600 kg, total length: 900 mm, drive type: Elektro, construction width: 790 mm, High-lift truck Load centre: 600 mm Mast type: Triplex Technical condition: very good Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Bodpfxeyfx Nas Aaqswh Rear tyre condition: 100% Battery voltage: 24V Battery capacity: 210Ah Battery year: 2019 Description: Factory-refurbished used unit by Toyota including new inspection and recertification according to FEM (formerly UVV). Pulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 280 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 3,562 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,450 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: As new Bwjdpfxsyf Rvrs Aaqsh Technical condition: Very good Front tires type: Pneumatic Front tires size: SOLIDEAL - SL-R4 - 12.5/80 R18 PR12 Rear tires type: Pneumatic Rear tires size: CAMSO - ED PLUS - 7.00-12 R12 PR12 Description: With the MC25, available in two-wheel or four-wheel drive versions, you can safely and precisely handle loads on any terrain. Its 30 cm ground clearance ensures excellent climbing ability on your fields. The machine's good all-round visibility, along with its compact and robust design, ensure optimum safety at work. Discover the MC25 – your new partner for increased productivity! This Manitou rough-terrain forklift is available with two-wheel or four-wheel drive technology, also in the MC 25-2, MC 25-4, MC 30-2, or MC 30-4 models. Side shifter, 3rd valve, 4th valve, heater, full cabin, full free lift, interior mirror, joystick, beacon,

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: SIEMENS, controller model: 840D sl, number of axes: 4, This 4-axis HELLER MC 20 was manufactured in 2019. It features a Siemens 840D sl control system, with X, Y, Z travels of 800 mm, 750 mm, and 800 mm respectively. The spindle supports a speed range of 5-16,000 rpm with a drive power of 34 kW. It includes a 44-position tool magazine and a rotary table diameter of 520 mm. Consider the opportunity to buy this HELLER MC 20 horizontal machining centre. Contact us for more information. • Working area: • Feed forces (X/Y/Z): 10,000 N • Speeds and dynamics: • Rapid traverse X/Y/Z: 60,000 mm/min • Acceleration: X = 7 m/s², Y = 8 m/s², Z = 6 m/s² • Spindle / machining unit (HSK-A63): • Tool interface: HSK-A63 • Spindle diameter in front bearing: 70 mm • Tool management: • Tool magazine type: HSK-A63 • Number of tool positions: 44 • Max tool weight with all pockets occupied: 6 kg • Max tool length: 550 mm • Max tool diameter: • With all pockets occupied: 120 / 80 / 80 mm • With adjacent pockets free: 150 mm • Minimum chip-to-chip time (VDI): approx. 3.3–4.4 s • Rotary axis: • A-axis with rotary table diameter: 520 mm • Interference circle diameter (A-axis): 1260 mm • A-axis speed: 17 rpm • Indexing resolution: 360,000 × 0.001° • Indexing accuracy (VDI/DGQ 3441): 12 arc sec • Measuring system: Direct, absolute linear scales • Utilities: Bwjdpeyf Nntsfx Aaqjh • Power supply: 400 V / 50 Hz • Total connected load: approx. 27–30 kVA • Compressed air requirement: 4.5–6 bar • Condition and documentation: • Machine is in very good technical condition • Complete service documentation available Additional equipment • Dedicated loading and unloading system

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D sl, total height: 4,000 mm, overall weight: 13,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 34,000 W, tool weight: 12,000 g, product length (max.): 5,300 mm, number of axes: 5, This 5-axis HELLER MC 20 was manufactured in 2019. It features a Siemens 840D sl control system, X/Y/Z travels of 800/750/800 mm, and rapid traverse rates up to 60,000 mm/min. The spindle supports HSK-A63 tools with speeds up to 16,000 rpm. Includes a 44-position tool magazine and a rotary table with a 520 mm diameter. Ideal for complex machining tasks. Contact us for more information about this machine. Working area • Feed forces (X/Y/Z): 10,000 NSpeeds and dynamics • Rapid traverse X/Y/Z: 60,000 mm/min • Acceleration: X 7 m/s², Y 8 m/s², Z 6 m/s²Spindle / machining unit (HSK-A63) • Tool interface: HSK-A63 • Spindle diameter in front bearing: 70 mmTool management • Tool magazine type: HSK-A63 • Number of tool positions: 44 • Max tool weight with all pockets occupied: 6 kg • Max tool length: 550 mm • Max tool diameter: with all pockets occupied 120/80/80 mm; with adjacent pockets free 150 mm • Minimum chip-to-chip time (VDI): approx. 3.3–4.4 sRotary axes (A/B/AB) • Rotary table diameter (A/B axis): 520 mm • Interference circle diameter: A-axis 1260 mm; AB-axis/B-axis 800/900 mm • Speed: A-axis 17 rpm; B-axis/AB-axis 40/50 rpm • Indexing resolution: A-axis 360,000 × 0.001°; B-axis 360,000 × 0.001° • Indexing accuracy (VDI/DGQ 3441): A-axis 12 arc sec; B-axis 10 arc secMeasuring system • Position measuring system: Direct, absolute linear scalesInstallation data Bwsdpfxsyf Idgo Aaqeh • Power supply: 400 V / 50 Hz • Total connected load: approx. 27–30 kVA • Compressed air requirement: 4.5–6 bar Additional equipment • Machine is in very good technical condition • Complete service documentation available • Dedicated loading and unloading system

Condition: ready for operation (used), Year of construction: 1990, travel distance X-axis: 510 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 460 mm, total height: 2,620 mm, overall weight: 3,800 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Matsuura MC-510V was manufactured in 1990. It features a spindle speed of 60-6000rpm, a BT40 spindle taper, and a 20-tool capacity. The machine dimensions include a 380x760mm table work area and a substantial weight of 3800kg. If you are looking to get high-quality milling capabilities, consider the Matsuura MC-510V machine we have for sale. Contact us for more information about this machine. • Table work area: 380 x 760 mm Technical Specification Bwjdpfeyfwadjx Aaqoh Taper Size BT 40

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 4,750 mm, fork length: 1,200 mm, total length: 4,320 mm, · Lastabstand, Mitte der Antriebsachse bis zur Gabel: 621 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 5970 kg / 820 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 1780 kg / 2510 kg · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Wenderadius 3405 m · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit - beladen 51 % · Festellbremse: Hydraulik bremst durch Druckverlust Bjdpjyf N A Dsfx Aaqowh · Motornorm: Stage V · Motorleistung gemäß ISO 1585: 37 kW · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 200 bar · Ölmenge für Anbaugerät 42 l/min

Condition: used, machine/vehicle number: 005948, Max. panel width: 1200 mm Max. panel length: 3200 mm Bedpfxsu T Tv Io Aaqjwh Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Movement system: suction cups.

Condition: used, machine/vehicle number: 005934, Max. panel width: 2200 mm Max. panel length: 4200 mm Max. panel stack height from the ground: 1000 mm Lifting capacity: 200 Kg Movement system: suction cups. Bedowcydbspfx Aaqjwh

Condition: good (used), functionality: fully functional, mileage: 49,506 km, power: 106 kW (144.12 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,100 kg, empty load weight: 1,840 kg, maximum load weight: 1,260 kg, first registration: 09/2024, next inspection (TÜV): 01/2028, loading space length: 2,862 mm, loading space width: 1,628 mm, loading space height: 1,397 mm, fuel consumption (urban): 7 l/100km, fuel consumption (combined): 7 l/100km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2024, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Driver/passenger airbag, audio system: radio with USB incl. Bluetooth and DAB radio reception, electrically adjustable and heated exterior mirrors, rear parking sensors, hill start assist, rear wing doors without glazing, double passenger seat, multifunction steering wheel for audio control, engine 2.0 L – 106 kW Multijet CAT, black wheel hub covers, tire pressure monitoring system, low emissions according to Euro 6d standard, height-adjustable driver’s seat with lumbar support and armrest, start/stop system. Wheelbase: 3,275 mm. Bedpfx Aaeyf I Uxoqjwh

Condition: excellent (used), Year of construction: 1997, CNC Lathe Spinner TC67H-MC Year of manufacture: 2002 . Tailstock . Chip conveyor . High-pressure pump . Chuck . Driven tools Technical specifications: Control: Siemens 840 D X-axis travel: 221 mm Z-axis travel: 590 mm Turning diameter: 300 mm Turning length: 600 mm Bwsdpsydlugofx Aaqsh Spindle speed: 4500 rpm

Condition: new, It is new spare parts never used. Bjdpfoygucfsx Aaqswh Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei 2300 ton machine. M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g

Condition: used, total length: 4,680 mm, Year of construction: 2017, load capacity: 6,000 kg, - ANTRIEBE: Vorderachse über zwei 3,5kW 72V AC Elektromotoren, Isolationsklasse H - BATTERIE: 72V - 625 Ah mit Lade- und Batteriefüllstandsanzeige - Arbeitszeit bis zu 8 reinen Kranstunden - BREMSEN: Automatisches Bremssystem wirkend auf alle Räder - HYDRAULIKSYSTEM: Angetrieben durch leise Zahnradpumpe (12kW), Isolationsklasse H - Hydraulikbedienung über Joystick und Hebel an der Funkfernsteuerung - Filter und Sicherheitsventile - Maximaler Betriebsdruck 22MPa Bedpsyfifxsfx Aaqowh - FUNKFERNBEDIENUNG: Auf alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen - RAHMEN: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten - REIFEN: Vorne no. 2 superelastisch 250x15”, Hinten no. 2 superelastisch 21x8-9” - AUSLEGER: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten, Aufgebaut in 4 vollhydraulischen Teleskop-Elementen. Auslegerwinkel: +60°/-15° - ABNEHMBARE KONTERGEWICHTE: Entwickelt für schnelle De- und Remontage, um jederzeit die Boden- und Achsbelastungen zu optimieren - LENKUNG: Über Hinterachse mit Elektromotor. Lenkeinschlag +90°/-90°. Gegenrotationssystem auf Vorderachse - MOTORPUMPE: Elektromotor 12kW 72 V AC, Isolationsklasse H - L.M.I.: Elektronische Lastbegrenzung “CE Standard”, Mit Sicherheitsleuchten und folgenden Displayanzeigen: Angehobene Last, Maximal zu hebende Last, Prozentuelle Lastanzeige, Arbeitsradius, Auslegerwinkel, Gewähltes Programm

Condition: ready for operation (used), Year of construction: 2005, number of axes: 2, This SPINNER TC65-MC was manufactured in 2005. A horizontal turning machine featuring a turret with driven tools, it handles a turning diameter of 310 mm and a length of 600 mm. Consider the opportunity to buy this SPINNER TC65-MC horizontal turning machine. Contact us for more information. • Turning diameter: 310 mm • Turning length: 600 mm • Tailstock • Turret with driven tools Additional equipment Bwodpfx Aox I S R Rsaqeh • Workpiece catcher

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Bwodpfxoydl E Es Aaqsh Video of machine in operation available

Condition: good (used), Year of construction: 2016, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 762 mm, CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Bedpfx Aajukcvgsqjwh Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.