Used International 1455 Xl for sale (25,490)

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Dwedpjxnp Rxefx Aduof

Condition: good (used), Used Thetford International T3 waste compactor. Dwsdpfehvi Ahsx Adujf

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Dwodpfjxiwb Uex Adujf Power: 220 volt. Table not included

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dodpfx Adju Ti Tvjuowf Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Dwedowhk Dvopfx Adusf

Condition: used, functionality: fully functional, In this offer you buy a used accessory ‘Canon POD Deck Lite XL-A1’ Dodpfjv R Tx Nox Aduswf Object of sale: 1 x Canon POD Deck Lite XL-A1: For various Canon imagePRESS models Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), Now in stock at Glendale we have this JBI Punch 3400. This punch includes both 3:1 and 2:1 pitch punching tools. The Punch 3400 is electrically operated via a foot pedal or sheet pressure and offers automatic sheet ejection, hugely increasing production. This model is in excellent condition and perfect working order. When innovation makes productivity and flexibility compatible… The Punch3400 is a heavy duty electric table top machine suitable for all punching applications when automatic equipment is not appropriate. Compact, it takes little working space whilst offering production levels higher than any other desk machine. Combined with the optional reception module, included with this machine, its unique punching, sheet ejection and stacking system in ONE operation provides one of the highest output (up to 18000 sheets per hour) in its range for a minimum investment. • Efficient : Punches bites of up to 30 sheets (80gsm) regardless of punching hole pattern. Punching, ejection and stacking in ONE operation with optional reception module re-delivering the punched sheets in the right order for increased productivity. • User friendly : Easy edge to hole margin adjustment. Selectable operation mode (sheet presence detector or foot pedal). Easy and accurate vertical sheet insertion. Reversing switch for quick release of paper jams. • Versatile : Fast and easy punching tool change over. All punch pins can be easily disabled for custom punch patterns. Dedpfx Aewpilhjduswf Specifications Manufacturer James Burn International Model Punch 3400 Max sheet size 340mm x 340mm Punching capacity up to 30 sheets (80gsm) Cycle speed 60 punches per minute Punch operation Foot pedal or sheet detector Punch tools included 3:1 & 2:1 pitch for wire binding Power requirement 220/240v 50Hz Machine weight 50kg + table Dimensions L680mm x W565mm x H460mm (excluding table)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Djdpfjtx Ux Rsx Aduswf Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. Dwsdpfx Adoxdimfjuof This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Dsdpfx Adsw H Naajuswf Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Dwedpfxjwty Eto Aduef

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Dedpew Nrpbefx Aduswf Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 70 kW (95.17 HP), type of input current: three-phase, overall weight: 750 kg, total length: 2,200 mm, total height: 2,300 mm, power: 70 kW (95.17 HP), Air-cooled Hitema chiller – 70 kW cooling capacity Dsdpfx Asw Ufnhodujwf Also available for rental R410A

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. Dodpfxjhg Rcxo Adujwf To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, Year of construction: 2025, functionality: fully functional, The Z-conveyor belt is for sale with the following technical data: Dwsdpfx Asw Nrm Hsduof Z-belt conveyor Type NDZ - Specifications. Feeding height: 500 mm Incline belt length: 1800 mm Discharge height: 500 mm Useful width: 600 mm, overall width: 750 mm Cleat height: 30 mm Discharge height: max. 1600 mm, min. 1150 mm Belt speed (constant): approx. 6 m/min Aluminum side guides, 60 mm high Mobile base frame with braked castors Reinforced conveyor belt, temperature resistant from -10°C to +90°C

Condition: new, Year of construction: 2024, functionality: fully functional, The conveyor belt is for sale and has the following dimensions; infeed : 600 mm Ascending belt: 1300 mm Djdpfxelikx Is Aduswf Useful width: 450 total width: 505 mm height adjustable: 750 - 1.050 mm Belt speed constant: 3m /min

Condition: new, Year of construction: 2022, - Delivery 500 mm - Climbing belt 1300 mm Dwsdpfx Adsg Arxveuof - Feed 600 mm - useful width 450 mm / total width 505 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - frequency converter (485 €) - Corrugated edge (492 €)

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 tank from MASS. Dodpfxjip Ucnj Aduswf This is available in different sizes (see pictures).

Year of construction: 2022, condition: new, Task: 600 mm Climbing belt: 1.800 mm delivery: 500 mm useful width: 450 mm Djdpfx Adjiq U S Touewf Total width: 505 mm Height: 1.000-1.300 mm

Year of construction: 2022, condition: new, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 350 mm / total width 405 mm Dwodpfx Aef U Eu Hedusf - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - Frequency converter

Year of construction: 2022, condition: new, Additional cost with corrugated edge : 374 € *Wavy edge is considered as optional equipment!* - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting trays - task length : 600mm - ascending belt length : 1800 mm - belt speed : 3m/min - cleat height : 30 mm - spring assisted height adjustment Dwedpfxsf U Evgo Adujf

Year of construction: 2022, condition: new, For sale is a NS 2 conveyor belt from Mass International. You can buy the belt both with and without separating roller. Separator roller costs an additional € 332 Dwedpfxsf E E Iqo Adujf Feed : 600 mm ascending belt : 1300 mm GB: 405 mm NB: 350 mm Belt speed constant: 3m /min

Year of construction: 2023, condition: new, - Delivery: 500 mm - Climbing belt: 1.800 mm - Feeding: 600 mm - cleat height: 30 mm - cleat spacing: 500 mm - Belt speed constant: 6m/min. Addition: Dwsdpok Nlfxjfx Aduof - corrugated edge (cost: 375 €) - closed cleats (standard: from a useful width of 350 mm the cleats are split in the middle!)

Condition: new, Year of construction: 2022, *STOCK CLEARANCE * DISCOUNT PROMOTION The conveyor belt is from 2022, new and unused. We offer 1 year warranty. New price from year of manufacture 2023: 1.870 € L. 2000 mm W: 150 mm Mobile Belt speed : 3m/min , but can also be changed Dodpfx Adjhy Edvsuewf Height adjustable : 840 mm - 1240 mm Addition: available with or without baffles/side panels (height : 60 mm)

Year of construction: 2022, condition: new, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 250 / total width 305 mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Other specifications: - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting plates Dodpfxeikvwfo Aduswf - PU belt - spring-assisted height adjustment - inclination of 35 - belt speed constant 3m/min. (standard) but can be changed up to 16m/min. - quality anodized aluminum profile - worm gear motor 3 x 400 V, 50 Hz - motor protection switch with 5 m cable & CEE - plug Possible on request: - Special size - cycle control - Frequency converter