Used International 485 Xl for sale (11,143)

Condition: good (used), Used Thetford International T3 waste compactor. Hodehvi Ahjpfx Aczop

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut Hedpfx Aowrn Iyeczsp 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified. Hsdjwgc I Rspfx Aczsp

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool Hsdpfxeif Ek Rs Aczjp • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed Hodjfnlkwjpfx Aczep • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Hjdpovvlkhsfx Aczsp Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Transport Belt, Running Belt 6m, Used Machine Manufacturer: Mass International Hjdpfx Acsv Dgndszop Model: NP / 04270 Overall Dimensions: 6000 x 420 x 930 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The belt has 3 fans, and the track can be ventilated/cooled. Electrical Specifications: 400V

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Hjdpfxszgt D Ho Aczsp Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Hedsyhnu Djpfx Aczsp Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements Hsdpfxshm Axgj Aczep FDA-compliant belt Modified belt speed etc.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Hjdju Ti Tvspfx Aczjp Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: new, New unit MASS International Hsdpfx Aod Tidxsczep NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Hedpfx Asr A D S Eoczjp Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, functionality: fully functional, New equipment MASS International Z series conveyor belt NDZ Angled conveyor / flow conveyor available for short-term delivery Example as shown in the picture: height-adjustable angled conveyor with adjustable angles Hjdpfx Acsiz S Htozjp NDZ 1 Infeed section 600 mm Ascending section 1300 mm Discharge section 500 mm Working width 250 mm Overall width 305 mm (without motor) height-adjustable discharge height 700 - 1000 mm adjustable angles for infeed and discharge sections adjustable inclination PU belt Color: black L-shaped cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button movable on steerable stop rollers three-part hopper plates for the infeed section The quoted price applies to the NDZ1.

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/lay-down conveyor Angle-adjustable conveyor belt with a hopper in the infeed section available for short-term delivery Hsdpfsh Nyp Uox Aczjp Example: NI 1 Length 1500 mm Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Movable on steerable swivel casters Optional: other dimensions, see standard delivery list dimensions according to customer specifications FDA-compliant belt modified belt speed etc.

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Hjdpfxjuip Ilj Aczep Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: used, Included in the delivery: 01x Pallet rack beam, used Material color: yellow Beam type: 7BB Box profile: 120 x 50 mm Design: End beam Bracket: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hodpjy Nxf Djfx Aczop General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These costs depend on the delivery location and scope of delivery and can be requested from us separately.

Condition: excellent (used), Year of construction: 2001, color: other, loading space volume: 25 m³, UBH INTERNATIONAL 20FT ISO Tank Container 22,500L / 3 compartments Compartment 1: 7,500L Compartment 2: 7,500L Compartment 3: 7,500L IMO1 T7 22T6 Bottom discharge Steam heating 2.5Y- + CSC test valid until 09-2028 = Further information = General information Year of manufacture: July 2001 Model year: 2001 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Hjdpfxsyznbxo Aczep Weights Unladen weight: 4,550 kg Payload: 29,450 kg GVW: 34,000 kg Functional Body brand: Van Hool 24.720L TC, 2 compartments (11,950L/12,770L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: used, functionality: fully functional, spindle bore: 165 mm, For sale: heavy-duty CNC lathe XYZ SL 1100 / 1500 mm in very good condition. The machine was purchased in 2019 and is ideal for machining large and heavy workpieces in single-piece and small-batch production. Technical specifications Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Year of manufacture: 2019 Control system: Siemens ShopTurn / Siemens CNC 840D Centre distance: 1,500 mm Maximum swing over bed: 1,100 mm Spindle bore: 165 mm Main drive: 70 kW Speed range: up to 660 rpm Bed width: 558 mm Tailstock fitted Automatic central lubrication Coolant system Full enclosure Heavy-duty cast iron machine bed Electric tailstock Large chuck Solid heavy-duty lathe design Safety enclosure Coolant system Work area lighting Applications: The XYZ XL/SL series has been specially developed for machining large and heavy workpieces. The solid cast iron construction, high spindle power and large spindle bore enable the cost-effective machining of: Shafts Flanges Rollers Hydraulic components Hjdpfx Ajzba N Heczop Machine components Steel and cast components The series is designed for workpiece weights of several tonnes and ranks among the heavy-duty industrial machine tools in its class. Condition The machine is in good condition No visible damage Viewing available by appointment Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Hedpfszdazbsx Aczjp Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), We are offering for sale a used shelf connector for double rows of shelving, manufactured by Link 51. The shelf connectors are designed for a shelf spacing of approximately 400 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 515 mm Shelf spacing: approx. 400 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.321 kg/piece Hodod Tyizspfx Aczep 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80|53 x 45|25 mm Crossbeam type: 4 BST Step profile: H 28 mm, W 20 mm Clips: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of crossbeams: 900 kg, with evenly distributed load 02x Securing pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information on the pallet racking crossbeam: Crossbeam type 4 BST is used to insert chipboard, steel panels, or similar materials, which then end up approximately flush with the top edge of the racking crossbeams. Hsdpskv Urwjfx Aczep This prevents any height loss; furthermore, the front of the step crossbeam protects the floors or the insertion segments from damage. The crossbeams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, or similar items.

Condition: good (used), Here, we offer a used shelf connector for double rows of shelving from the manufacturer Link 51 for sale. The shelf connectors are designed for a shelf spacing of approximately 300 mm. Hedped Tymdefx Aczjp Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.092 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. Hodpfx Acokvnm Aozjp The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Condition: good (used), We are offering you a used shelf connector for double shelf rows from the manufacturer Link 51 for sale. Hodpfx Asd Typyjczjp The shelf connectors are designed for a shelf spacing of approximately 650 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double shelf rows Material color: anthracite Overall length: approx. 765 mm Shelf spacing: approx. 650 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.878 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8