Used Dmg Mori Nhx 5000 for sale (5)

Condition: good (used), Year of construction: 2017, Horizontal machining center Machine type: DMG MORI NHX 5000 Control: M730UM mit Celos Year: 2017 SPECIFICATIONS Travel X-Axis: 730 mm Y-Axis: 730 mm Hsdpfx Aszinbxjdqer Z-Axis: 880 mm Rapid motion: (X/Y/Z): 60 m/min. Feed: (X/Y/Z): 60 m/min. Spindle speeds: 15.000 rpm Spindle motor: 37 kW Torque: 250 Nm Toolchanger Tool: HSK 63 Tool capacity: 60 Work piece diameter: 70 / 140 mm Tool lenght: 550 mm Tool weight: 12 kg Palett system Amount of paletts: 2 Palett size: 500 x 500 mm B-Axes: 0,001° Max. Table Load: 500 kg Equipment Chip conveyor Filtration system: Knoll KF 110/700 Internal cooling: 70 bar

Condition: ready for operation (used), Year of construction: 2017, A DMG MORI CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 15000rpm, torque: 250Nm/104Nm, tool interface: HSK-A63, spindle-to-table distance: 80mm-810mm, spindle nose-to-table distance: 70mm-950mm, pallets: 2, pallet dimensions X/Y: 500mm/500mm, max. workpiece weight: 700kg, max. workpiece diameter: 800mm, max. workpiece height: 1000mm, tool positions: 60, rapid traverse: 60m/min, feed rate: 60m/min. Machine dimensions X/Y/Z: approx. 6000mm/4000mm/2700mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D sl, power-on hours: 33184h, operating hours: 10601h. Including 70bar internal coolant supply and Knoll KF 110/700. Documentation available. An on-site inspection is possible. Hedpozlt Szefx Adqjr

Condition: ready for operation (used), Year of construction: 2017, A DMG Mori CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 20000rpm, rapid traverse: 60m/min, feed rate: 60m/min, feed force: 10kN, tool interface: HSK-A63, number of pallets: 2, max. workpiece weight: 500kg, tool positions: 40, control: Siemens Sinumerik 840D sl Operate, power-on hours: 14948h, operating hours: 5251h. Including chip conveyor, pallet changer and coolant tank. Documentation available. An on-site inspection is possible. Hedpfszlt Rqex Adqer

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) Hjdpfx Aoyt Hwzjdqor • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance Hodpsyhwpwefx Adqsr - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.