Used Job-Mann for sale (2,491)

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. Fsdpfx Aou Nwfbshkepk *

Condition: ready for operation (used), Year of construction: 2025, operating hours: 58 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, total height: 2,900 mm, total width: 2,650 mm, table width: 398 mm, table length: 398 mm, table load: 300 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, tool weight: 8,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,900 mm, number of axes: 5, This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 640 HSCI • A-Axis Travel: +105° / -120° • C-Axis Travel: ±360° • Table Diameter: 398 mm • Maximum Spindle Speed: 12000 rpm • Tool Magazine Capacity: 40 tools • Rapid Feed X/Y: 25 m/min • Rapid Feed Z: 20 m/min • A-Axis Max. Speed: 25 rpm Fsdozphg Iepfx Ahkjpk • C-Axis Max. Speed: 25 rpm • A-Axis Positioning Accuracy: ±5 arcsec • C-Axis Positioning Accuracy: ±5 arcsec • A-Axis Torque: 700 Nm • C-Axis Torque: 450 Nm • Control: HEIDENHAIN Conversational / DIN-ISO Programming • Machine Configuration: CNC Swivel Rotary Table (A/C Axis) • Spindle Cooling: Liquid Cooled Motor Spindle • Operating Hours (Program Run): 58 h Accessories: • 19" Touchscreen • HEIDENHAIN HR 510 FS Electronic Handwheel • Automatic Tool Changer • External Coolant System • Internal Coolant Through Spindle (Optional) • HEIDENHAIN TS460 Probe Preparation • TT460 Tool Measurement Preparation • SE661 Probe Receiver Extra Information • Showroom Machine • 12-Month Warranty • Retrofitting and Commissioning Available on Request (Additional Cost) Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: excellent (used), 472 USED HOBART - UNGERMANN Pass-through proofing chamber. EXTERNAL DIMENSIONS (in cm): - W: 192 - L: 805 INTERNAL DIMENSIONS (in cm): - W: 157 - L: 734 - H: 200 Fedpfszrn S Ajx Ahkspk Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), * Brand: Kleemann * KL1= A-A length: 17.500 mm, Beltwidth: 500 mm, Driving: 3 kW. Fodpfeywmm Sjx Ahkjpk * KL3= A-A length: 14.000 mm, Beltwidth: 800 mm, Driving: 7,5 kW. * KL4= A-A length: 35.000 mm, Beltwidth: 800 mm, Driving: 11 kW. * KL5= A-A length: 20.000 mm, Beltwidth: 650 mm, Driving: 7,5 kW. * KL6= A-A length: 15.000 mm, Beltwidth: 1000 mm, Driving: 11 kW.

Condition: ready for operation (used), * Brand: Hein Lehmann * Type: flip/flop Fpodpfx Aoyxpbzohkjk * On stock: 1 piece * 1x Surface: 5000 x 1000mm - 1 Decks * Driving: 7,5 kW E-Motor * Incl.: construction

Condition: used, empty load weight: 3,436 kg, maximum load weight: 16,564 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 06/2021, suspension: air, tire size: 265/70 19,5, tire condition: 70 %, color: black, Year of construction: 2021, front tire size: 265/70 19,5, rear tire size: 265/70 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41268 Hueffermann, HAR 20.70 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Duomatic air connection Fodsztlwfjpfx Ahkopk * 15-pin connector * Storage box/toolbox * Pneumatic locking system * Suspension: Air * Gross vehicle weight: 20,000 kg * Tare weight: 3,436 kg * Payload: 16,564 kg * Permissible gross vehicle weight: 20,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 70%|70% -- 70%|70% - Tire size: 265/70 R19.5 * Tire condition 2nd axle: 70%|70% -- 70%|70% - Tire size: 265/70 R19.5 * Tire size: 265/70 R19.5 * Pneumatic container locking system * Roll-off container length: 5500 mm - 7000 mm Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists for advice.

Condition: good (used), Wilhelm Haarmann KG, DM PU, grinding machine. Fpedpfobq Syyex Ahksk

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: Fpjdpfx Ahsc Idn Ujkjk • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Year of construction: 1979, condition: ready for operation (used), Built in 1979 Size max 1.000 x 1.400 mm Equipment • air jets in table Fpodpjd Ic U Uefx Ahksk

Year of construction: 1988, condition: ready for operation (used), Built in 1988 Size max 1.150 x 1.650 mm Feeding height max 185 mm Width 1.935 mm Depth 1.420 mm Power requirements 1,3 kW (220/380V, 50Hz) Weight 700 kg (approx.) Fpsdpfx Aed Ic Uxohkok Equipment • fixed gauge at the rear • side gauge on the left or on the right • air table • air-removing roller

Year of construction: 1968, condition: used, machine/vehicle number: 1016, none available. Fpedpsbritmofx Ahkjk

Year of construction: 1992, condition: ready for operation (used), Built in 1992 Feeding height max 185 mm Size max 1.050 x 1.450 mm Equipment • fixed gauge at the rear • side gauge on the left or on the right • air jets in table • air-removing roller Fpjdpfx Ahod Ic Uvokok

Year of construction: 1994, condition: used, Feeder: Rotary stack feeder 1st Folding Unit: 4 folding pockets Downstream knife shaft Noise reduction device 2nd Folding Unit: 4 folding pockets Noise reduction device Accessories: Fpodpebi U Rqsfx Ahkjk Slitting, perforating, cutting Shingle delivery

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Size: 700 x 500 mm Fpsdpedyk Rpefx Ahksk Speed: 4.000 c/h Equipment: • hand fed station • 15 stations

Condition: used, machine/vehicle number: 2163, Size: 1.300 x 940 mm Fedpfe Hquyox Ahkopk Equipment: air jets in table

Year of construction: 2013, condition: good (used), Rebuilt 2013 Size: max 420 x 360 mm min 105 x 70 mm Speed: max 5100 c/h Fodpfjhc Nlljx Ahkepk Equipment - hand fed station - 12 stations - missing sheet and double sheet control - criss-cross delivery standards: - 1 set of operating manuals 1- set of electrical diagrams standard tools: - 1 spare part catalogue standard equipment: Condition cleaned & checked Helmstedt, Germany next airport Hannover

Year of construction: 1991, condition: ready for operation (used), Built in 1991 section height max 160 mm Size max 1.250 x 1.650 mm Pile height max. 1.250 - 1.400 mm lifting capacity 3.000 kg Fpedpfx Ahod Idf Hjkjk Equipment • air table

Year of construction: 1989, condition: used, Built in: 1989 Size: max 1.700 x 1.300 mm lifting capacity: max 2.000 kg Fjdpodg Uq Asfx Ahkopk Stroke height: 1.000 mm

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 -Travel ranges X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons Fodpfoztyi Nex Ahkspk -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Errors and omissions excepted.

Condition: used, Year of construction: 1992, functionality: unexamined, Used CNC tool milling machine, Fehlmann Picomax 51-CNC 3, year of manufacture 1992. Last documented inspection: 03/31/2023. Technical data: - Travels X/Y/Z: 420 / 240 / 120 mm - W-axis: 450 mm - Table: 730 x 280 mm - Distance from table to spindle: 0–560 mm - Maximum table load: 75 kg - Spindle power: 4 kW - Torque: 45 Nm - Speed: 50–9,000 rpm - Tool changer: SF32 Fpsdpfxozrnyms Ahkok - Feed rate X/Y: 1–7,200 mm/min - Feed rate Z: 1–3,600 mm/min - Drilling capacity in steel: up to 20 mm - Thread cutting: up to M20 - Milling: up to 20 mm - Weight: approx. 1,300 kg - Connection: 3 x 380 V / 50 Hz, 10 kW - Positioning accuracy: 0.01 mm on 400 mm - Repeatability: 0.002 mm Extensive accessories and documentation as shown in the photos. Location: 65618 Selters, Germany.

Condition: new, Waldmann MQAL 84 ND machine light / 113731000-00806840, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fpsdpfx Ahsznq R Tjksk

Condition: used, Year of construction: 1992, functionality: fully functional, overall weight: 1,000 kg, Hofmann surface planer, 305 x 41 cm Planer width 41 cm Year of manufacture 1992 305 cm planer table length Planer fence, adjustable from 90 to 45 degrees 4 kW motor with brake Fjdpfx Ahoztz Exjkspk 2 cutterblocks with wedges Resharpenable planer blades Includes 4 spare planer blades, 410 mm Maximum chip removal 10 mm Adjustment for rabbet and chamfer joints Dust extraction connection 140 mm Weight 1000 kg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 410 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 FS, table width: 375 mm, table length: 650 mm, table load: 250 kg, overall weight: 1,800 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 6,800 W, number of axes: 3, This 3-axis KUNZMANN WF 410 MC was manufactured in 2019. It features an X-axis travel of 410 mm, Y-axis travel of 350 mm, and Z-axis travel of 450 mm. The machine includes a table size of 650 × 375 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 410 MC vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 620 FS • Table Size: 650 × 375 mm • Maximum Table Load: 250 kg • Spindle Taper: SK40 DIN ISO 7388-1 Form AD • Maximum Spindle Speed: 5,000 rpm • Spindle Power: 6.8 kW • Rapid Feed X/Y/Z: 5 / 5 / 5 m/min • Quill Stroke: 70 mm • Operating Voltage: 400 V • Mains Frequency: 50 Hz • Number of Phases: 3 • Connection Power: 13 kVA • Rated Current: 18 A • Main Fuse: 25 A • Short-Circuit Breaking Capacity: 10 kA • Control Voltage: 24 V • Machine Weight: Approx. 1,800 kg • Maximum Transport Weight: 2,025 kg Accessories: • Machine Enclosure with Safety Doors • Machine Light (LED Flexible Arm) • Central Lubrication System • Coolant System (66 L Tank) • Automatic Mechanical Tool Clamping • Electronic Feed and Spindle Override Potentiometers • Electronic Handwheel HEIDENHAIN HR 510 FS • Probe Preparation Kit for TS 220 / TS 260 • 4th Axis Preparation Kit Extra Information: • Machine only used in training workshop • Fully refurbished in 2026 • 6-month warranty • Retrofitting and commissioning available on request at an additional cost Technical Specification Taper Size SK 40 Fpjdjzpaytspfx Ahkek

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : ISO30 - Spindle speeds : 18000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 705 / 425 / 610 [mm] A ROTARY AXIS - Travel : 360 [°] (+/-) Fpsdpfx Ahsuhb A Ejkjk - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : +180/-5 [°] (+/-) - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 TABLE - Table dimensions : 1260 x 490 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2300 [mm] - Machine height : 3000 [mm] - Machine weight : 5100 [kg] EQUIPMENT - CNC : iTNC 530 - Electronic handwheel - Type of divisor : 4e-5e axe intégré * manufacturer : Fehlmann * model : ATS 160 CNC * clamping diameter : 300 [mm] * center height : 160 [mm] * tightening type : Pneumatique - Coolant tank * with high-pressure pump - Oil mist extractor - Spindle cooling unit - Workpiece probe : Renishaw OMP 40-2 - Electric transformer

Condition: used, TECHNICAL DETAILS - Laminated tray : 1600 x 800 x 900 [mm] Fodpfx Ahoxylv Uokspk - Weight : 120 [kg] - Quantity : 10 - Unit price : 600 €