Used Job-Mann for sale (2,426)

Year of construction: 2014, condition: excellent (used), 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: SOMOS / Mann + Hummel mit Fördergerät Typ: T200 MC2 Baujahr: 2014 Inhalt Trichter: 20 Liter Trichter: Edelstahl Trockenluftmenge: 200 m³/h Nsdsiq Ng Repfx Ah Nela Trockenlufttemperatur: max. 200° C

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 Njdpfx Aewbzxqjh Nola -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

Condition: used, Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm Nlodpfx Ahjd Sxg Uj Nsa -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Condition: used, Pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, adapter tube, pipe bend Nledpeh Rkuhefx Ah Noa -Manufacturer: Mann, elbow 90° Ø 150 mm -Total dimensions: 360/220/H155 mm -Number: 8x sheets available -Price per piece -Weight: 1.5 kg

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/Outlet: Ø 39/39 mm -Part Number: 45 Quantity: 1 air filter housings included -Price: per piece -Dimensions: Ø 173/165 mm -Weight: 1.8 kg Nodpfx Ahjd Sxg Rs Njla

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon combination air filter, air filter housing with connecting hose -Part Number: 45 225 92 304 -Inlet/Outlet: Ø 70/80 mm -Overall dimensions: 950/270/H280 mm -Weight: 8 kg Nljdoqcyz Tjpfx Ah Nja

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 Njdjd Swrdspfx Ah Nela -Inlet/Outlet: Ø 65/61 mm -Quantity: 47 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter Nlodpfx Aopyk Nuoh Noa -Manufacturer: Mann & Hummel, Mann-Piclon combination air filter, air filter housing -Part Number: 45 160 92 951 -Inlet/Outlet: Ø 68/71 mm -Quantity: 22 combination air filters available -Price: per piece -Dimensions: 300/225/H305 mm -Weight: 2.5 kg/pc.

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/Outlet: Ø 52/46 mm -Part Number: 44 100 92 921 -with air filter: C 11 100 -Quantity: 6 air filter housings available -Price: per piece -Dimensions: Ø 190/285 mm -Weight: 1.15 kg Njdpfx Aod Swrkjh Njla

Condition: good (used), Year of construction: 2019, Mist extractor Nodpjtu Uxrefx Ah Nsla

Condition: used, functionality: fully functional, conveyor belt length: 1,980 mm, conveyor belt width: 700 mm, total length: 1,990 mm, total width: 900 mm, total height: 4,500 mm, TAF item number: 1000003872 Manufacturer: MANN + HUMMEL Year of manufacture: unknown Overall dimensions: 1,990 x 900 x 450 mm (LxWxH) Width incl. side panel: 800 mm Side panel height: 100 mm Width incl. drive: 900 mm Conveyor length: 1,980 mm Conveyor width: 700 mm Belt type: PVC, smooth Belt width: 690 mm Substructure: incl. supports with swivel castors, height-adjustable H: 750 to 900 mm Drive: centre station Motor: gear motor Motor data: unknown Conveyor speed: 0.1 m/s Nlodpjr D Rtpofx Ah Noa Condition: Used / fully functional Function test: OK

Condition: new, Year of construction: 2025, New assembly table with adjustable support bars COMALL JOB 15/3000 Technical specifications: - Contact surfaces in semi-rigid gray PVC - Loading: 180 Kg - Four length wise sliding supporting bars, clamping system through handle - Pneumatic system with two pneumatic connections - Hardware boxes, 6 pcs. - Extensible support, equipped with two longitudinal sliding bars Nsdogiud Repfx Ah Nela

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details. • Table • Length: 1,200 mm • Width: 1,200 mm • Surface: Tapped holes • Maximum workpiece dimensions (L × W × H): 1,600 × 1,600 × 950 mm • Workpiece capacity • Maximum workpiece weight: 5,000 kg • Spindle • Torque (continuous/10 min): 637 Nm • Tooling • Tool magazine capacity: 40 tools Nlodpfx Aeyla S Nsh Nsa Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 2019, functionality: fully functional, Plasma Cutting System Becky Job Master 6.20 with Extraction Table – Year 2019 This plasma cutting system is being sold due to an upgrade to a laser cutting machine. The machine is fully operational and can be inspected and tested under power. Location: Vorarlberg Technical Data Manufacturer / Model: Becky Job Master 6.20 Year of Manufacture: 2019 Working Area: 6,000 × 2,000 mm Z-Axis Travel: 300 mm Max. Cutting Speed: 75 m/min Dimensions: Machine Length: 8,000 mm Machine Width: 3,700 mm Overall Height: 2,000 mm Work Table Height: 820 mm All accessories belonging to the system are included, such as: Hypertherm XPR 170 power source Donaldson filtration unit Software etc. Nlodpfex U Dqiex Ah Nea Sale excludes disassembly, transport, and installation.

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono Nlodjyk Elropfx Ah Noa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 6197, Auction of a Thalmann THAKO folding machine! Nledeyzhc Aepfx Ah Noa EQUIPMENT Depth stop Automatic program with stored sheet metal shapes

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes Njdex A E Szopfx Ah Nola No. Operating units: 3 Nr sectioned swab: yes

Condition: excellent (used), This line was bought to produce protein bars for a sports nutrition business (under 900 hours). The machinery is in immaculate condition having only been used occasionally for their own production. PLEASE NOTE THAT THE VEMAG HP25E HAS BEEN REPLACED BY A NEWER HP20E FROM A DIFFERENT FACTORY. Nsdpfxjunm S He Ah Nsla

Condition: excellent (used), Year of construction: 2014, operating hours: 1,350 h, machine/vehicle number: 14 083-1, Seydelmann K126 HU all stainless steel bowl cutter with rare option of fitted tote bin loader. Bought new in 2015 and only used for cutting herbs. Only used for 1,350 hours since new. Nsdpsvcqh Eofx Ah Nola

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Nlodpfx Aex A U Ncjh Noa The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Asphalt plant central tower with screening unit, mixer, bucket elevators… Capacity: 160 tonnes/hour Nljdpfxey Hf Due Ah Noa

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope Nsdpsghnbzsfx Ah Nola -Wire rope: Ø 9 mm -Length: 28.7 m -for electric cable winch -other crane ropes are also available -Price: per roll -Quantity: 1 roll available -Weight: 10.5 kg/piece

Condition: new, functionality: fully functional, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 1,020 kg, empty load weight: 1,020 kg, operation weight: 1,020 kg, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable crawler chassis 6. Articulated boom pro 7. Hidden travel motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy crawler tracks for a pleasant ride .. 14 servo joystick control 15.2 travel speeds We have all spare parts for machines of our brand available throughout Europe SPECIFICATIONS Model: Japan 1000 Y Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated power: 11.8 kw/2300r/min Main pump: Parkier Nlodpfx Ahsvuk Uvj Nja Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Digging arm: Movable sideways Travel speed: Two speeds Drive motors: Hidden Style hoses: Hidden DIMENSIONS Overall dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770 mm Total track length 960 mm WORKING RANGE Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. upgrade height of bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 11.03 kW (15.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,700 kg, empty load weight: 1,700 kg, operation weight: 1,700 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, hydraulics, GG1700 3 cilinder kubota . Professional new excavator model: GG1700 from the international brand Günter Grossmann. Every Günter Grossmann machine comes with a company warranty. The GG1700 model is a great piece of equipment for the most demanding construction, electrical and plumbing companies. We guarantee service after the equipment warranty. Excavators are manufactured on the basis of advanced technology. We have all parts for our brand machines in stock in Europe Price EUR 16600 (excl. VAT) (Including: Excavator GG1700 + bucket 400 mm) SPECIFICATIONS Nedpfjhlv N Isx Ah Nola Model: GG1700 Brand: Günter Grossmann Weight: 1700kg Joystick: Yes Extendable Tracks: Yes Movable swivel arm: Yes Engine brand: KUBOTA D902 Power: 25 HP Pump: TF PSA12NOO Distributor: TF TKM15BX-08LP 01 Rotary Motor: Eaton VS Drive Motor: Eaton USA Driving speed: 0-8.5 km/h MEASUREMENTS Total length:: 3585 mm Total width: 1300 mm Total height: 2362 mm Minimum ground clearance: 1605 mm WORKING RANGE max. digging depth: 2300 mm Maximum digging radius: 4050 mm Maximum dump height: 2550 mm ACCESSORIES Bucket 300mm: 260 Eur ex Bucket 400mm: 300 Eur ex Bucket 600mm: 330 Eur ex Bucket 1000mm: 400 Eur ex Log grab: 600 Eur ex Ripper: 320 Eur ex Rake: 320 Eur ex Drill: 1800 Eur ex Quick coupler: 450 Eur ex Demolition Hammer: 1800 Eur ex

Condition: new, mileage: 1 km, color: yellow, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, Gunter Grossmann GG09 + KUBOTA EURO 5 The new Günter Grossmann GG09 Loader The Günter Grossmann GG09 loader (900 kg load capacity) is the brand-new machine from Günter Grossmann, a high-quality machine engineered for a European company. This loader delivers outstanding power and is capable of performing reliably under all working conditions. The loader is extremely user-friendly and comfortable to operate. The control panel is clearly laid out, intuitive, and straightforward. The cab is soundproofed, insulated, and equipped with heating. Additionally, the machine features a comfortable and elegantly glazed cabin, ensuring both safety and operator comfort even during long shifts. The loader is built with a highly durable and robust construction. It comes standard with a quick coupler, allowing for fast attachment changes without leaving the cab. Additional equipment available on request: (Excl. VAT) Standard delivery includes: GG09 loader + bucket + quick coupler Model 900 kg Specifications Model: GG09 Load capacity: 900 kg Engine: Kubota Euro 5 (V1505) Rated engine power: 24.47 HP Number of cylinders: 4 Rated speed: 2400 rpm Operating weight: 2300 kg Nlodpfx Aovuk U Ajh Nsa WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Lifting height: 2750 mm MAIN DIMENSIONS Overall length (bucket on ground): 4037 mm Overall height: 2264 mm Overall width: 1446 mm WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Lifting height: 2750 mm