Sawmill

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Knsdpfxez Aplxs Agrsb Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. Kedpfx Agjwgbw Reronb 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm Knodez Apllspfx Agrjb External Reference: Demo - Lot 2

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg Knsdezzlc Rjpfx Agrjb EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Knedpfx Agoxfrmwersb Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Kedpjzzkwgofx Agrenb Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, total width: 28,500 mm, shelf height: 4,500 mm, carrying capacity per cantilever arm: 1,000 kg, distance between stands: 1,500 mm, load capacity per stand: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! The sale includes the entire shelving system. Kedpfx Aezzda Usgronb TECHNICAL DETAILS Number of uprights: 19 Number of arms: 38 Total load capacity per upright: 2,000 kg Load capacity per arm: 1,000 kg Arm length: 1,250 mm Upright height: 4,500 mm Base length: 1,200 mm Distance between uprights: 1,500 mm

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Kedpfxexgt U Ee Agrenb Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: ready for operation (used), Year of construction: 2012, operating hours: 926 h, functionality: fully functional, machine/vehicle number: 546324, saw blade diameter: 500 mm, cutting width (max.): 300 mm, overall weight: 1,500 kg, saw blade length: 7,209 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. saw blade length: 7,209 mm Max. saw width: 300 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 85 mm Kedozzbfbspfx Agrenb Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse: 25 A Main motor power: 7.5 kW Connected power: 11 kW Dimensions & Weight Dimensions (L x W x H): 11,250 x 900 x 1,800 mm Weight: 1,500 kg Operating hours: 926 h EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ksdpfx Agozzbdwjrsnb Number of spindles: 8 pcs. Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Power: 7.5 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Kedpfx Agszh Ti Eoronb Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Knjdpfozzbcyex Agrsb Vacuum pump Tools

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 1.000.022.855, functionality: fully functional, overall weight: 3,500 kg, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Corner rounding unit 7. Unit: Edge finishing unit 8. Unit: Brushing unit TECHNICAL DETAILS Min. edge band thickness: 0.4 mm Max. edge band thickness: 3 mm Max. edge band height: 64 mm Knodpfx Agszzbcmjrsb Min. panel thickness: 10 mm Max. panel thickness: 60 mm Min. panel width: 85 mm Max. panel width: 3,200 mm Min. panel length: 140 mm Max. panel length: 3,200 mm Min. feed rate: 12 m/min Max. feed rate: 18 m/min Feed rate control: variable Max. spindle speed: 12,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 20 A Fuse rating: 32 A Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,200 x 2,200 mm Machine weight: 3,500 kg Number of transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for trimming unit Tools for rough milling unit Tools for corner rounding unit Tools for edge finishing unit Tools for brushing unit CE marking Documentation

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Knedpfx Ageympx Uereb

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: A1106011/1300, working width: 1,300 mm, overall weight: 7,500 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. working width: 1,300 mm Max. workpiece thickness: 120 mm MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse rating: 63 A Connected load: 17.0 kW Weight: 7,500 kg Transport weight: 7,500 kg Number of transport packages: 8 units Kedpszzbcgefx Agrjnb EQUIPMENT 4 spray guns Wagner pump system