2-k sealing robot

Lisec VL-1N/20

Condition: excellent (used), Year of construction: 2001, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 361-006203, total length: 8,300 mm, total width: 1,700 mm, total height: 3,000 mm, input voltage: 400 V, overall weight: 3,400 kg, power: 10 kW (13.60 HP), Lisec VL-1N/20 sealing robot, year 2001, for double and triple glazing, consists of the following: RTVN-15/20VFE, sealing robot infeed conveyor with glass unit measuring device (glass and spacer frame) VL-1N/20, sealing robot, for sealing double and triple units up to a total unit thickness of 52 mm and unit size up to 3.5 x 2.0 m The machine is in good condition. It has been installed and operational with us since 2013. Regularly serviced and fully functional. Inspections in operation are possible until 28.02.2026. It will then be dismantled and ready for sale (loading). The machine is available for collection from 01.03.2026. Fgedpfxex Syhle Afzsa

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Fgsdpfswikn Rox Afzea Gas filling press: Models and triple available

Condition: good (used), Year of construction: 1997, functionality: fully functional, total width: 5,000 mm, total length: 10,500 mm, Glass cutting lift table Fjdpfx Aov Dl Uiefzega

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Fodpfx Asxnvq Eofzega Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, input voltage: 400 V, overall weight: 4,400 kg, type of input current: AC, space requirement width: 2,300 mm, space requirement length: 9,000 mm, space requirement height: 3,800 mm, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2023, consisting of following components: - RTVN-11/25VFE, inlet conveyour sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles - DOS-1PSD, mixing and metering station for Polysulfide The machine is in good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished Fgedperg Eypefx Afzja The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery Fsdorrvkbepfx Afzjga

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 27,300 mm, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, CNC Vertical Edge Processing Center with Integrated Single-Sided Drilling and Milling Function LiSEC, KBF-60/33 Right – Left, Year: 2016 Automatic washing and drying machine for flat glass included Fsdpfxjv Hprqs Afzoga 400 V, 50 Hz In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2003-2928/29, input voltage: 400 V, type of input current: three-phase, Pannkoke laminated glass cutting table with a maximum glass cutting width of 3.24 m and a maximum thickness of 12 mm laminated glass. Includes EUROMEC semi-automatic float cutting table (year 2003) as a loading table. Both machines are in very good condition. Fgjdex I Rb Ijpfx Afzea

Condition: used, Year of construction: 2005, Multifunction centre for machining glass, INTERMAC Type Master 23, year 2005 (1700 operating hours) Fgedpex Iuhrsfx Afzoa

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Fgsdpjx Tq S Dsfx Afzsa