Bridgehead for cutting system

Lisec ESL

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Rcedpfx As Af Aqwebash Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 1. LBS-60/30 (6 pieces) 2. ESL-60/30 RS-L 3. VB-45 4. ATH-60/30 FD 5. BTA-50/33 6. BTS-10/30 7. BTA-20/33 8. BTS-37/33 Rcjdpfx Abo Afw U Dsajh 9. TBX-33/12

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking. The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process. Line Components: 1. Float and Low-E Glass Cutting Table - Model: LiSEC ESL-60/30RS-L - Serial number: 030-062962 - Year of manufacture: 2013 - Glass thickness: 2–19 mm - Cutting of straight and irregular shapes - Low-E coating removal system 2. Laminated Glass Cutting Table - Model: LiSEC VB-33 - Serial number: 040-014769 - Year of manufacture: 2013 - Designed for cutting laminated glass - Supported configurations: 33, 44, 55, 66 and 88 3. Glass Breaking Table - Model: LiSEC BTS-37/33 - Serial number: 054-054715 - Year of manufacture: 2013 - Weight: 1,525 kg - Maximum load: 55 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 10.89 kVA - Operating pressure: 8 bar - Protection rating: IP32 4. Tilting and Transport Table - Model: LiSEC ATH-60/30FD - Type: Double-Sided Moveable Glass Un/Loading Station - Serial number: 011-071248 - Year of manufacture: 2013 Rsdpfx Asz Ilrisbasch - Weight: 6,040 kg - Maximum load: 48 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 7.80 kVA - Operating pressure: 6 bar - Equipped with new mechanisms and vacuum suction cups for handling glass sheets Condition: - The complete production line is in good working condition and fully operational, - Documentation and additional technical information are available upon request, - A set of spare parts is included with the production line, along with an estimated value of the spare parts, - The production line will be available for collection from December 2026, - On-site inspection of the machinery is possible by prior arrangement. Note: - Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction) - The metal guideways in the floor for the Tilting and Transport Table are not included in the sale

Year of construction: 1998, condition: ready for operation (used), A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible. Rcodpfey Eg A Njx Abash