CNC slotting machine

Leistriz Polymat 50/400

Condition: used, Year of construction: 2022, fuel type: diesel, motor manufacturer: KTA38-G5, Field of application: Construction Dwsdpfx Ajvyn Ecskcjc Empty weight: 18.250 kg Generator capacity: 1.100 kVA Frequency: 50 Voltage: 230 Transport dimensions (LxWxH): 20FT HC container Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm 3 Broaching-stations Djdpfjbrcmksx Akcswc With chip-conveyor + platform and safety door

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min Control Siemens total power requirement 13 kW weight of the machine ca. 5,2 t Machine in excellent condition, with many accessories. Dsdpsv Nracefx Akcswc Retrofitted in 2014, Siemens control system.

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Dedpfx Aju D Aagskcowc

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power. Dodpfxjup Uzfj Akcjwc

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Dwjdpfx Akegtty Tscoc Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min Dodpswh Rp Ejfx Akcowc - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Dsdet Hw D Ropfx Akcjwc Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, groove width 3-28 mm tool length - max. 1200 mm working speed 3m/min+6m/min m/min pulling capacity 60 kN bei 3m/min kN Dodpfoyz Dgdsx Akcjwc pulling capacity 40 kN bei 6 m/min kN stroke 1050 mm weight of the machine ca. 600 kg Includes a wide selection of reaming needles The following needle widths are available (approx. dimensions): 6; 6; 8; 12; 14; 16; 18 The following mandrels (approx. dimensions): Ø 17; 19; 21; 30; 38; 44; 50; 58

Condition: ready for operation (used), Year of construction: 1983, Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible. Dwedpfx Akjw U T Txecoc