Laminating machine

Lamina System Fully automatic laminator FA1416

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h Lsdpfx Ahouf Sy Aj Njhf - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Lhsdpfx Aow Hrrroh Njf Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Year of construction: 2008, condition: ready for operation (used), A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Lsdpewgc Ahsfx Ah Njhf

Year of construction: 2012, condition: used, stainless rotary sandwich skillet sealer, twin tooling, adjustable heat seal temp controls, currently tooling 170mm x 43mm, mobile, single phase, Lodoc I Nz Ijpfx Ah Nehf

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Lodjydnxnopfx Ah Nshf Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: used, Year of construction: 1999, Prefeeder BOBST DYNALOAD BOBST MASTERFLEX 203 A MATIC flexo printer Lsdpfowrh Hcsx Ah Nohf Feedbelt Vacuum Sheet cleaner N.6 fixed printing units from above, carbon doctor blade ink system and centerline N.4 printing units have n. 2 anilox rolls on board and 2 printing units have n. 3) QUICK Anilox Replacement System with automatic lift Vacuum transfer of printed sheets between units Integrated Registron iQ 300 Quality Printing Control with automatic ejections of non conformity and "zero defect" production output. N. 6 Air dryers Sheet ejector for quality control Bobst CUBE control unit Max sheet size 1.270 x 2.032 mm. Max printing area 1.230 x 2.032 mm. Max. speed up to 10.000 s/h BOBST RECEPTION FLEXO non stop stacker

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: DG-60-B 95174, type of input current: AC, punching force: 400 t, machine base height: 2,400 mm, input voltage: 380 V, input frequency: 50 Hz, Iberica DG-60-B Flatbed Die Cutting Machine Size: (250 x 450) - (860 x 1.140) mm Weight: 19.000 kg Power Req.: 380 V / 50 Hz Installed power: 13,5 kW Used space: 9.800 x 3.700 x 2.400 mm Status: mnf. 1995 Machine has stripping station, for clean product pallet delivery Pressing force : 400 tons Working speed : up to 5.000 sheets / hour Cardboard thickness : up to1,5 mm Corrugated cardboard thickness : up to 5 mm Gripper margin 8-15 mm, standard 10 mm Lhsdpfewwtn Aox Ah Njf Stroke of stamping plate 55 mm, Suitable for cardboard and corrugated cardboard type : E, B, C, EB, EE, BE Machine in printing house, under power, test is possible Located: Europe Eastern Current State: Under power Available: 07-2025

Condition: used, Year of construction: 2006, Format: 1250 x 800 mm Equipment: Ljdey Agg Nspfx Ah Nshf Automatic lifting cycle controlled by a photocell or manual mode, fast operation. lifting height approx. 840 mm, machine height approx. 2000 mm Lifting Capacity: 1000 kg 380V power supply

Condition: good (used), Year of construction: 2015, functionality: fully functional, Stacker Baumann type NUP 1600, serial no. 53.300, load capacity 1,600 kg, max. format 1500 x 1185 mm. Immediately available. Lhsdpfx Aoyy Syceh Njf