Laminating machine

Lamina System Fully automatic laminator 1620BL

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW Bedeuf Sy Aopfx Afysld - Compressed air supply: 6 – 7 bar

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Bledpfx Afjra Rbgjysd HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Year of construction: 2008, condition: ready for operation (used), A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Bljdpfswgc Ahex Afyjd

Condition: ready for operation (used), Sheet format: 100-1000x40-1120mm, max. carton thickness: 20mm, output carton/ paper: 7-60/ 7-40 sheets/min, weight: 1t, with pressure belt and sheet laminating station, including documentation. Bjdpfx Aoihp Nfjfysld

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm Bledjwp R Htjpfx Afysd rewinder: 1200 mm speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: COATED WEB BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Year of construction: 1994, condition: excellent (used), TECHNICAL DATA: LENGTH OF WORKING ARM: 1600 mm MAX. CUTTING THICKNESS with 130 mm blade: 45 mm MAX. CUTTING THICKNESS with 160 mm blade: 70 mm MOTOR POWER: 0.75 kW – 380 V / 50 Hz Bsdpjr Hmtksfx Afyold NEON LAMP VOLTAGE: 220 V BLOWING DEVICE TO CLEAN THE WORKING AREA: ELECTRONIC, 220 V WORKING TABLE: 1000 x 2000 mm DIMENSIONS: 2400 x 1000 x 1700 mm WEIGHT: 230 kg

Condition: used, Year of construction: 1999, Prefeeder BOBST DYNALOAD BOBST MASTERFLEX 203 A MATIC flexo printer Feedbelt Vacuum Sheet cleaner N.6 fixed printing units from above, carbon doctor blade ink system and centerline N.4 printing units have n. 2 anilox rolls on board and 2 printing units have n. 3) QUICK Anilox Replacement System with automatic lift Vacuum transfer of printed sheets between units Integrated Registron iQ 300 Quality Printing Control with automatic ejections of non Blsdswrh Hcjpfx Afysd conformity and "zero defect" production output. N. 6 Air dryers Sheet ejector for quality control Bobst CUBE control unit Max sheet size 1.270 x 2.032 mm. Max printing area 1.230 x 2.032 mm. Max. speed up to 10.000 s/h BOBST RECEPTION FLEXO non stop stacker

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Bledpfx Aetru Hzsfysd Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.

Year of construction: 2022, condition: ready for operation (used), Technical specifications: Sheet Max. sheet size: 1060 x 740 mm Min. sheet size: 400 x 360 mm Stock range: Paper from 90 gsm Cardboard 157~2000gsm Corrugated board (E,B FLUTE) Min. gripper edge: 4mm Die-cutting Max. die-cutting size: 1040 x 730 mm Max. pressure: 300 tons Max die-cutting speed: 7500 sph Max speed with stripping 6500 sph Rules height: 23.8 mm Main motor capacity: 11 kW Total power capacity: 23 kW Dimensions (L x W x H): 6000 x 4200 x 2400 mm Net weight: 16,000 kg 2 pcs die-cutting plates 2 pcs Die-cutting frames Bedpfx Afsw Hpxieysld 1 pc tape inserter

Condition: good (used), Year of construction: 2014, operating hours: 8,000 h, functionality: fully functional, overall weight: 1,600 kg, total length: 1,800 mm, total width: 800 mm, total height: 2,150 mm, Becker Variair Central System VACS 0040 0030 ll Bjdpfxsvzh Ums Afyeld Performance / power 24Kw 3 x vacuum pump Becker VTLF 2.250 Inlet capacity each pump: 244 m3/h, Together: 732m3/h Max Vacuum each pump: 200 mbar