Used Automatic Decapper Krones 10 heads year 1998

Krones 360-10-113

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Nodpfxshix Uko Af Eolh

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Njdpfxol Hx Adj Af Eslh

Condition: excellent (used), Year of construction: 2003, Loos UH-D 800/13Bar{800kg/h} Nedpfxoy E D Uvj Af Ejlh

Condition: used, Year of construction: 2013, Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - 2016 overhauled and modified Features: - Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Nledpfx Aoukafrsf Esh - Separate module for foreign bottle detection (height, contour, color)

Condition: used, Year of construction: 2004, operating hours: 45,000 h, Used Blow Molding Machine KOSME KSB 4L up to 6800 bph Nedpfxsvgvb Eo Af Eelh The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four heating modules and eight heating provides a heating capacity of 46 kW. Moreover, its patented positioning system places infrared lamps precisely, thereby ensuring optimal external heating of preforms without opening the oven. For efficiency, the conveyor belt system for preform feed orients and positions the preforms. It streamlines the heating process and thus reduces preparation times. Blowing process and production efficiency Furthermore, the Blow Molding Machine KOSME KSB 4L’s pneumatic preform separation system adjusts the preforms’ distance from 40 mm in the oven to 120 mm in the mold. Then, the blowing process operates in a fully replaceable station, which adapts to different bottle diameters as needed. Afterward, the transfer unit moves heated preforms into the mold cavities, where they undergo sealing, stretching, and blowing. Each cavity consequently produces up to 1,700 bottles per hour, thereby achieving high precision and stability in production. Consumption and energy requirements In terms of energy, the KSB 4L operates on a voltage of 3 x 230/400 V, with a frequency of 50 or 60 Hz, an installed power of 56 kW, and an average consumption of 36 kW. Additionally, the compressed air system maintains a working pressure of 10 bar and a blowing pressure up to 40 bar, consuming 470 Nm³/h of air. In addition, the cooling system requires a water flow of 6.6 m³/h at an inlet temperature of 5 to 7 °C, achieving a cooling capacity of 20.8 kW. Operator advantages and maintenance Notably, the design allows easy access to all internal components, thereby enabling quick format changes and simplifying mold replacement, which takes an average of only 30 minutes. Furthermore, its linear movement arrangement and durable construction materials minimize maintenance needs. Additionally, the touch-screen interface lets operators input parameters for different types of preforms and bottles, and the system offers password protection to enhance operational security. Conclusion of the Blow Molding Machine KOSME KSB 4L In conclusion, the KSB 4L serves as an ideal solution for those seeking a reliable and high-performance used machine that produces PET bottles with precise specifications and optimized consumption.

Year of construction: 2007, condition: ready for operation (used), Output: 39,600/h, additional accessories are available. Nodpfomdry Hjx Af Eelh

Condition: good (used), Automatic labeling machine Nljdpfx Aohz Dauof Eeh

Condition: used, Year of construction: 2003, Labeler, make Krones, type: Universella 10-4-4, for 10.000 - 14.000 bph, parallel machine, with 10 bottle dishes and 4 glue pallets, with 3 bottle sets, with 2 aggregates for body, shoulder- and back label, with 2 heatable glue pumps, built 2003, already dismantled Nledpfx Aounh T Esf Eoh

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Features Stand shape: Feet Number: 4 Fastening: fixed Nljdpfx Afsty Tidj Esh Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg Nlsdpferxuv Aex Af Eeh