All Surface Empty Bottle Inspector

HEUFT InLine TI 24 BFS1

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar Gbodpfx Amswra S Rjgor CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2009, Three identical Certuss steam generators are available. Year of manufacture: 2008/2009/2010, steam output: 600kg/h, pressure vessel volume: 42.9l, set pressure: 10bar, test pressure: 57bar. Machine dimensions X/Y/Z: 1650mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible. Gbjdeyw Svrepfx Amgor

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Gbjdpsl Hx Adsfx Amgor

Condition: used, Year of construction: 2013, Overview Gbedpfx Amoukafrjgjr The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - 2016 overhauled and modified Features: - Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Gbjdpfxen S A R Se Amgor

Year of construction: 2007, condition: ready for operation (used), Output: 39,600/h, additional accessories are available. Godpomdry Hefx Amgobr

Condition: used, Year of construction: 2004, operating hours: 45,000 h, Used Blow Molding Machine KOSME KSB 4L up to 6800 bph The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four heating modules and eight heating provides a heating capacity of 46 kW. Moreover, its patented positioning system places infrared lamps precisely, thereby ensuring optimal external heating of preforms without opening the oven. For efficiency, the conveyor belt system for preform feed orients and positions the preforms. It streamlines the heating process and thus reduces preparation times. Blowing process and production efficiency Furthermore, the Blow Molding Machine KOSME KSB 4L’s pneumatic preform separation system adjusts the preforms’ distance from 40 mm in the oven to 120 mm in the mold. Then, the blowing process operates in a fully replaceable station, which adapts to different bottle diameters as needed. Afterward, the transfer unit moves heated preforms into the mold cavities, where they undergo sealing, stretching, and blowing. Each cavity consequently produces up to 1,700 bottles per hour, thereby achieving high precision and stability in production. Gedpfevgvb Ejx Amgsbr Consumption and energy requirements In terms of energy, the KSB 4L operates on a voltage of 3 x 230/400 V, with a frequency of 50 or 60 Hz, an installed power of 56 kW, and an average consumption of 36 kW. Additionally, the compressed air system maintains a working pressure of 10 bar and a blowing pressure up to 40 bar, consuming 470 Nm³/h of air. In addition, the cooling system requires a water flow of 6.6 m³/h at an inlet temperature of 5 to 7 °C, achieving a cooling capacity of 20.8 kW. Operator advantages and maintenance Notably, the design allows easy access to all internal components, thereby enabling quick format changes and simplifying mold replacement, which takes an average of only 30 minutes. Furthermore, its linear movement arrangement and durable construction materials minimize maintenance needs. Additionally, the touch-screen interface lets operators input parameters for different types of preforms and bottles, and the system offers password protection to enhance operational security. Conclusion of the Blow Molding Machine KOSME KSB 4L In conclusion, the KSB 4L serves as an ideal solution for those seeking a reliable and high-performance used machine that produces PET bottles with precise specifications and optimized consumption.

Condition: good (used), Automatic labeling machine Godpfehz Dauex Amgjbr

Condition: used, Year of construction: 2010, machine/vehicle number: LC539, Used Aseptic Filling Line Tetra Pak A3 FLEX 1000S up to 9000 l h The Used aseptic filling line Tetra Pak A3 FLEX 1000S up to 9000 l h provides an advanced solution for aseptic bottling of liquid products. Specifically, it can reach a production capacity of 9000 liters per hour. This line ensures maximum efficiency and reliability when filling dairy products and juices. Moreover, its fully integrated aseptic process preserves the organoleptic and microbiological characteristics of the product. Main Components of the Aseptic A3 Flex 1000S line Homogenizer and Sterilizer – 12 tons per hourThe homogenization and sterilization system of the Used aseptic filling line Tetra pak A3 FLEX 1000S up to 9000 l/h stabilizes the product and eliminates microorganisms through controlled thermal treatment. Furthermore, its 12 tons per hour capacity allows it to handle large volumes while maintaining product quality and safety. Alsafe Tank – AsepticThe Tetra Alsafe tank stores products aseptically before filling. As a result, its food grade certified materials ensure complete isolation and prevent contamination risks. Tetra Pak CIP System The Cleaning In Place CIP system automates line sanitation. Consequently, it cleans all product contact parts internally, reducing downtime and improving operational efficiency. Tetra Pak A3 FLEX 1000S Filling MachineThe A3 FLEX 1000S filling machine forms the core of the Used aseptic filling line Tetra Pak A3 FLEX 1000S up to 9000 l h. Specifically, it fills dairy products and juices aseptically in carton containers. In addition, it ensures high dosing precision, thereby minimizing waste and guaranteeing excellent packaging quality. CAP21 Capping MachineThe CAP21 capping machine seals containers hermetically, thus preventing contamination and extending shelf life. Additionally, its seamless integration with the filling machine maintains an uninterrupted workflow. Godpfx Amev Ai Haegsbr ACHX30 Accumulator 47 metersThe ACHX30 accumulation system optimizes package flow along the production line. Consequently, it reduces downtime and enhances overall bottling efficiency. Tetra Pak Film Wrapper 67 Shrink WrapperThe Film Wrapper 67 shrink wrapper of the Used aseptic filling line Tetra pak A3 FLEX 1000S up to 9000 l/h provides secondary packaging by wrapping products in plastic film. In turn, this step improves...

Condition: excellent (used), Year of construction: 2007, operating pressure: 6 bar, temperature: 110 °C, tank capacity: 4,210 l, We offer for sale LOOS water boiler with Weishaupt burner Boiler parameters: - Maximum operating pressure: 6 bar - Maximum test pressure: 9.6 bar - Maximum temperature: 110 degrees - Power: 3,500 kW - Capacity: 4210 l - Year of construction 2007 Parameters of Weishaupt Burner RGL 50/2-A Power: 4,500 KW Year of Manufacture: 2007 In addition, control cabinet Gedpfx Ajr Hyntsmgjbr Very good condition