Extruder

KraussMaffei KMD-2-50-KK

Condition: good (used), KMD 2-50KK Reduction Gearbox Flender Extruder Krauss Maffei Lodsxzd T Uopfx Af Sjta Reduction gearbox for KMD 2-50KK. Used but functional. The part is original and shows signs of corrosion and contamination due to storage. Private sale, no guarantee or warranty. We also have some spare parts for Krauss Maffei extruders in stock (e.g. control cabinets, hydraulic units, gearboxes KMD 2-90, etc.) – please enquire. €8,500

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set - Suitable for single wall pipes up to 220mm Lodpfsua E H Sjx Af Seta

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Ltjdpfxsh Nmt Ds Af Sja Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 2010, condition: like new (used), BATTENFELD PE PIPE HEAD RK 315 helix, screen basket with tool 315 PE Little used smokes Ltsdpfx Afshy Aq Is Ssa Condition: As good as new The pipe head is my property Sachal extrusion machines Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones Lsdpfjuziyhex Af Seta - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: good (used), For sale - injection molding machine, aggregate, machine for the production of EPS polystyrene shapes - thermoboxes, fishboxes - used, very good condition. The machine is currently still connected to the installation, which will make it easier for the buyer to dismantle and mark individual connections - Complete machine, ready to be connected to a steam installation, transport of EPS granulate, electricity, compressed air, cooling system. - Year of production 2023 - configurable mold for the production of polystyrene thermoboxes, fishboxes, 3 sizes, with or without holes, with a lid - a total of 6 configurations - complete boxes with lids are produced in one cycle - no need to change molds. - the set includes the rights to the design of boxes, fishboxes - documentation, ATTENTION! the machine can produce EPS building shapes for walls, ceilings !! - examples in one of the photos. We have other elements of the production line, check our ads. We also have other elements/devices for sale, such as: - injection molding machine, aggregate, machine for the production of EPS polystyrene foundation plates + plate mold - Certus container steam boiler room (oil steam generator) - EPS foamer - steam installation: boiler room - machines - 3m3 steam tank - installation for transporting foamed EPS - EPS silos Ledpfx Asua Dqisf Seta - polystyrene crusher - many spare parts Possibility to send more photos and information by email. Possibility to sell individual components of the set separately.

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD Ltedpjuhpiyefx Af Ssa - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. Lsdpfjq Tr T Rsx Af Sjta – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm – Working hours: 64.082

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Lodpfx Afetpg D Uo Sota Working hours: 76,200

Year of construction: 2006, condition: as good as new (ex-display), Only been used for a short time in the technical center, therefore in very good condition. We are always available for further questions. Lodpfx Ajl Slv Tef Seta